Job:
D-2 Power Vent
For Pool & Spa Heaters
Models 206-407
Engineer:
Contractor:
Prepared By:
Date:
Versatile
•
•
•
For use with pool and spa heaters
Permits sidewall venting
Allows use of vent pipe as small as 4 in.
diameter
Efficient
•
Maintains thermal efficiency of 82% on all
heater sizes
Multi-Position Capability
•
90° elbow can be rotated to align fan
discharge with vent pipe and reduce the
number of fittings required
Features
ƒ Induced draft
ƒ Vent (Category III) runs up to 100 ft. equivalent length
ƒ Plenum sized for appliance capacity
ƒ Air flow proving switch, mounted and wired
ƒ Fan motor relay, mounted and wired
ƒ 240/120 Volt, 60 Hz, 1.95/1.0 Amp, 130 CFM Max.,
3200 RPM motor; Factory-wired for 240 Volt
ƒ 90° elbow is used as a termination cap for
horizontal venting
ƒ Heavy-duty galvanized steel cabinet
ƒ PolyTuf textured powder coat finish
ƒ Indoor/Outdoor construction
ƒ Easy installation
ƒ Limited one-year warranty
ƒ Shipped loose for field mounting
Catalog No.: 1000.70A
Effective: 10-15-07
Replaces: 5-1-05
|