Your new PYLE HOME PAMP Amplifier
gives you the power and versatility you need in a professional sound system.
The wide frequency response of it handles easily amplification of voice and music.
The signal sensing of dual inputs turns the amplifier on automatically when music
is sensed on RCA inputs. The activation of Line 1 input that will override Line 2
input makes the amplifier perfectly as a zone amplifier for a multiroom distribution
audio system.
FEATURES AND CONTROLS
Pyle Home PAMP1000 Manual - 2
FEATURES AND CONTROLS
3 - Pyle Home PAMP1000 Manual
CONNECTION DIAGRAM-A:
In this application the TV audio signal acts as "Priority" source at Line 1 input and a
distributed audio signal from the other audio system acts as "Primary" source at Line
2 input. Whenever the TV is activated, its signal overrides the distributed signal of
Line 2, only the TV audio will be heard via the amp, but the distributed audio of Line
2 input will still be present at Line 2 Output and sent to additional zone. Once TV
is turned off, the amp will switch to the distributed audio automatically as an audio
source, if the distributing audio is still active.
CONNECTION DIAGRAM-B:
In this application a computer's sound card acts as "Priority" source at Line 1 input
and the TV audio signal acts as "Primary" local source at Line 2 input. Whenever the
computer is activated, its signal overrides the TV signal of Line 2, only the computer
audio will be heard via the amp. Once the computer is turned off, the amp will switch
to the TV automatically as an audio source, if the TV is still active.
Pyle Home PAMP1000 Manual - 4
Specifications
Input Impedance, balanced (unbalanced) ............................. 20 k-Ohms
Continuous Output Power
Stereo Mode
20 Hz to 20 kHz, 8 Ohms .................................................. 60 Watts x 2
1 kHz, 4 Ohms, ................................................................. 70 Watts x 2
Maximum Power, 8 Ohms.................................................. 65 Watts x 2
Maximum Power, 4 Ohms.................................................. 80 Watts x 2
Bridged Mode
Maximum, 20 Hz to 20 kHz, 8 Ohms ......................................130 Watts
Maximum, 1 kHz, 4 Ohms, .....................................................160 Watts
THD at rated output power............................................................ 0.1%
Frequency Response +/- 3 dB.......................................10 Hz to 50 kHz
Signal to Noise Ratio A-Weighted.................................................100dB
Speaker Impedance
Stereo.................................................................................. 4-16 Ohms
Bridged................................................................................ 8-16 Ohms
Speaker Impedance...................................................... A,B (4-16 ohms)
Bridged (8-16 ohms)
Power Requirement.................................120V AC 60Hz/230V AC 50Hz
Power Fuse.............. T 4AL 250V for 110-120V and T 2AL for 220-240V
Dimensions, inches (mm) WxHxD .. 16.53 x 2.36 x 8.26 (420 x 60 x 210)
Weight, lbs (kg) ..................................................................... 9.08(4.12)
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement without notice.
5 - Pyle Home PAMP1000 Manual
Your Pyle Home Amplifier is an
example of superior design and
Pyle Home PAMP1000 Manual - 6
Limited Warranty
All PYLE HOME products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for one (1) year from the date
of purchase. This warranty is limited to the original retail purchaser
of the amplifier.
You must also include the following items with your return:
A copy of your sales receipt or other proof of purchase
A brief letter, indicating the problem you are experiencing with the product
Include in your letter your return address, daytime phone number and
R.A. number
Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return
Hotline at (718) 236-6948 to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.
Also include a check or money order for $15.00 for return shipping,
handling and insurance, or provide your Visa/MC
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid. to:
7 - Pyle Home PAMP1000 Manual
|