Sanyo Cell Phone PLS 3810 User Guide

“Navigation Key Shortcuts” on page 37.)

9. SPEAKER Key lets you place or receive voice calls and

activate ASR in speakerphone mode, or turn the

speakerphone mode on or off during a call.

Key Functions

1. Earpiece lets you hear the caller and automated prompts.

2. Main Screen displays all the information needed to operate

your phone, such as the call status, the Contacts list, the

date and time, and the signal and battery strength.

10. BACK Key deletes characters from the display in text input

mode. When in a menu, pressing it returns you to the

previous menu. This key also allows you to return to the

previous screen in a Web session.

3. MENU/OK Key lets you access the phone’s menus and select

the highlighted choice when navigating through a menu.

11. Navigation Key scrolls through the phone’s menu options

and acts as a shortcut key from standby mode. These keys

can be reassigned to create customized shortcuts. (See

4. Camera Key lets you access the Photos menu. Press and

hold to activate the camera mode and take pictures.

5. TALK Key allows you to place or receive calls, answer Call

Waiting, use 3-Way Calling, or activate Automatic Speech

Recognition (ASR).

12. Headset Jack allows you to plug in an optional headset for

convenient, hands-free conversations. CAUTION! Inserting

an accessory into the incorrect jack may damage the phone.

6. Microphone allows other callers to hear you clearly when

you are speaking to them.

13. Softkeys let you select softkey actions or menu items

corresponding to the bottom left and right lines on the main

screen.

7. Keypad lets you enter numbers, letters and characters and

navigate within menus. You can use the numeric keypad for

speed dialing. (See “Speed Dialing” on page 20.)

14. LED Indicator shows the status of your phone and charging

at a glance.

8. END/POWER Key lets you turn the phone on or off, end a

call, or cancel your input and return to idle mode (standby

mode or service search mode).

15. Outer Screen lets you monitor the phone’s status and see

who is calling without opening the phone.

16. Speaker lets you hear the different ringers and sounds. You

Viewing the Display Screen

can mute the ringer when receiving incoming calls by

pressing

or the side camera button.

The status bar at the top of your phone’s display screen provides

information about your phone’s status and options. These tables

identify the major symbols you’ll see on the status bar or other

positions of your phone’s display screen.

17. Camera Lens, as part of the built-in camera, lets you take

pictures.

18. Battery Release Slot lets you open the battery cover to

replace the battery.

To view a list of your phone’s icons and descriptions, press

MENU/OK > Settings > Phone Info > Icon Glossary.

Tip

19. Micro-USB Connector allows you to connect a compatible

charging cable or USB data cable (not included). CAUTION!

Inserting an accessory into the incorrect jack may damage

the phone.

Service Icons

Signal Strength – Your phone’s current signal strength. 

(More bars = stronger signal.)

20. Volume Button allows you to adjust the ringer volume

whenever your phone is turned on or adjust the voice volume

during a call.

No Service – Your phone cannot find a usable signal.

21. Side Camera Button lets you open the Photos menu when

the phone is open. This button also allows you to mute the

ringer when receiving incoming calls.

Roaming – Your phone is “roaming” off the home network.

Web Service – 1xRTT Web service is available. When active, the

icon is animated.

22. Internal Antenna facilitates reception and transmission. To

maximize performance, do not obstruct the internal antenna

while communicating. (See page 14.)

Web Service Dormant – Web service is currently dormant.

Web Service Unavailable – Web service is currently unavailable.

Status Icons

Messaging Icons

Battery – Your phone’s current battery charge level. (The icon to the

left shows the battery is fully charged.) The icon is animated while the

battery is charging.

Multiple Messages – You have two or more different types of new

messages waiting.

Picture Messages – You have one or more new picture messages

waiting.

Location On – Your phone’s location feature is on and available for

location-based services such as GPS Navigation.

Text Messages – You have one or more new text messages waiting.

Location Off – Your phone’s location feature is off. Your location is

available only for 911.

Voicemail – You have one or more new voicemail messages waiting.

Silence All – Your phone’s sound is turned off.

Urgent Messages – You have one or more new urgent messages

waiting.

Vibrate All – Your phone’s sound is turned off but vibrate is turned

on.

Ringer Off – Your phone’s ringer is turned off.

Bluetooth Icons

1 Beep – A beep sounds when you receive an incoming call, a

message, etc.

Visible – Your phone is discoverable by (visible to) other Bluetooth

devices.

1 Beep and Vibrate – 1 Beep and vibrate are set.

Connected – Your phone is connected to a Bluetooth device.

Ringer and Vibrate – The volume level is set to between 1 and 8

and vibrate is turned on.

Enable – Your phone’s Bluetooth feature is enabled.

Speaker Mode – Your phone is in speaker mode.

The above icons will blink while your phone is communicating with a 

Bluetooth device.

Turning Your Phone On and Off

Voice Call Icons

Missed Call – You have one or more missed voice calls.

Turning Your Phone On

ᮣ

Press and hold

Bluetooth Device – A call is in progress using a Bluetooth device.

Headset – A call is in progress using an optional wired headset.

Car Kit – A call is in progress using an optional car kit device.

Once your phone is on and finds a signal, it automatically enters

standby mode – the phone’s idle state. At this point, you are

ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of

searching, a Power Save feature is automatically activated. When

a signal is found, your phone automatically returns to standby

mode.

Others

In Power Save mode, your phone searches for a signal

periodically without your intervention. You can also initiate a

search for service by pressing any key except numbered keys.

TTY – Your phone is connected to a TTY device.

Alarm – An alarm or countdown is set.

The Power Save feature conserves your battery power

when you are in an area where there is no signal.

Tip

Notification – You have events, alarms, or countdown notifications.

HAC Enabled – Your phone’s HAC setting is enabled.

See “Setting Up Your Phone” on page 2.

For a quick check of your battery level, glance at the battery

charge indicator located in the upper right corner of your phone’s

display screen. When there are approximately five minutes of talk

time left, the battery icon ( ) turns red and the phone sounds a

warning tone.

Turning Your Phone Off

ᮣ

Press and hold

for two seconds until you see the

powering-down animation on the display screen.

Your screen remains blank while your phone is off unless the

battery is charging.

After an additional five minutes or so, the phone sounds a

warning tone three times and then turns off.

Battery and Charger

Long backlight settings, searching for service, vibrate

mode, browser use, and other variables may reduce the

battery’s talk and standby times.

Note

Use only Kyocera-approved batteries and chargers

with your phone. The failure to use a Kyocera-

approved battery and charger may increase the risk

that your phone will overheat, catch fire, or explode,

resulting in serious bodily injury, death, or property

damage.

WARNING

Watch your phone’s battery level indicator and charge the

battery before it runs out of power.

Tip

Installing the Battery

Battery Capacity

Your phone is equipped with a Lithium Ion (Li-Ion) battery. It

allows you to recharge your battery before it is fully drained. The

battery provides up to 5.8 hours of continuous digital talk time.

Removing the Battery

Charging the Battery

Keeping track of your battery’s charge is important. If your battery

level becomes too low, your phone automatically turns off, and

you will lose any information you were just working on.

1. Make sure the power is off so that you don’t lose any stored

numbers or messages.

2. To open, insert a fingernail into the slot ( ), and apply light

pressure while sliding the cover down ( ).

Always use a Kyocera-approved desktop charger, travel charger,

or vehicle power adapter to charge your battery.

3. Lift the battery up and remove it from the phone ( ).

1. Plug the phone charger into an electrical outlet.

Do not handle a damaged or leaking Li-Ion battery

as you can be burned.

WARNING

2. Plug the other end of the phone charger into the micro-USB

connector located on the upper left side of your phone.

With the Kyocera-approved Li-Ion battery, you can recharge the

battery before it becomes completely run down.

Navigating Through the Menus

The navigation key on your phone lets you scroll through menus

quickly and easily. Many menus feature a scroll bar on the right to

help you keep track of your position in the menu.

To navigate through a menu, press the navigation key up or down.

For a diagram of your phone’s menu, please see “Your Phone’s

Menu” on page i.

Selecting Menu Items

Displaying Your Phone Number

As you navigate through the menu, menu options are highlighted.

Select any option by highlighting it and pressing

is numbered, you can select it by pressing the corresponding

number on the phone’s keypad.

. If the option

ᮣ

Press

> Settings > Phone Info > Phone#/User ID.

Your phone number and other information about your phone and

account will be displayed.

For example, to open the alarm setting screen:

1. Press

to access the main menu.

Setting the Keyguard

2. Select Tools by highlighting it and pressing

To avoid accidentally pressing a side button, this feature enables

you to lock side buttons while the phone is closed.

3. Select Alarm by highlighting it and pressing

For the purposes of this guide, the above steps condense into:

Press > Tools > Alarm.

1. Press

2. Select On or Off.

You can deactivate this feature temporarily by opening the

> Settings > Keyguard.

ᮣ

Backing Up Within a Menu

Tip

phone, or by pressing and holding the side camera button

while the phone is closed.

ᮣ

Press

to go to the previous menu.

to return to standby mode.

ᮣ

Side buttons will be temporarily unlocked, for example, when:

ⅷ Receiving a call.

ⅷ Talking on a call.

ⅷ Receiving voicemail, messages, or calendar or alarm

notifications.

“Setting Message Notification” on page 33.)

ⅷ JAVA or Camera is activated.

Making Calls

ⅷ Making an emergency call or in emergency mode.

1. Make sure your phone is on.

If you select Icon Only under Messages > Settings >

Notification, notifications will not unlock side buttons. (See

Note

2. Enter a phone number from standby mode. If you make a

mistake while dialing, press

3. Press

Guard is enabled, see “Call Guard” on page 92.)

to erase the numbers.

. (To make a call when you are roaming and Call

Making and Answering Calls

4. Press

or close the phone when you are finished.

Holding Your Phone

To maximize performance, do not obstruct the internal antenna

area.

If the Parental Controls feature is on and Voice Calls are

restricted, you can only place calls to or receive calls from a

limited set of phone numbers. (See page 39.)

Note

To redial your last outgoing call, press TALK, highlight the

call, and then press TALK again.

Tip

Correct

Incorrect

When making calls off the home network, always dial using

11 digits (1 + area code + phone number).

You can also place calls from your phone by speed dialing

(page 20), by using Automatic Speech Recognition (page 60), and

by using your History listings (page 45).

Internal Antenna

Phone Number” on page 18.)

phone or pressing other keys. See “Call Answer Mode” on

page 38.)

Dialing Options

When you enter numbers in standby mode, you can see available

dialing options by pressing OPTIONS (right softkey). To select an

option, highlight it and press

Your phone notifies you of incoming calls in the following ways:

ⅷ The phone rings or vibrates.

ⅷ The indicator light flashes.

ⅷ Save to save a phone number in your Contacts. (See “Saving a

ⅷ The backlight illuminates.

ⅷ Contact Details to view the detailed information of a Contacts

entry when the number you have entered is already saved in

your Contacts.

ⅷ The screen displays an incoming call message.

If the incoming call is from a number stored in your Contacts, the

entry’s name is displayed. The caller’s phone number may also be

displayed, if available.

ⅷ

Hard Pause to insert a hard pause. (See “Dialing and Saving

Phone Numbers With Pauses” on page 19.)

For other actions when receiving a call, you can select an

onscreen menu or press a key:

ⅷ

2-Sec. Pause to insert a two-second pause. (See “Dialing

and Saving Phone Numbers With Pauses” on page 19.)

ⅷ Press

to answer the call in speaker mode.

You can also send a text message or picture message

when the left softkey displays SEND MESSAGE.

Tip

ⅷ Answer to answer the call.

ⅷ When connecting via Bluetooth, select Answer with

<Bluetooth device name> or Answer with Phone to answer a

call with your selected device.

Answering Calls

1. Make sure your phone is on. (If your phone is off, incoming

calls go to voicemail.)

ⅷ Silence to mute the ringer and stop the vibration. Pressing

or the side camera button has the same effect.

2. Press

to answer an incoming call. (Depending on your

settings, you may also answer incoming calls by opening the

ⅷ Send to Voicemail to ignore the call and transfer it to your

voicemail.

ⅷ Ignore with Text to ignore the call and send a text message to

the caller.

To display a Missed Alerts entry from standby mode:

1. Press > Missed Alerts.

ⅷ Press

to ignore the call.

2. Highlight the entry you wish to view and press

Calling Emergency Numbers

You can always place calls to 911 (dial

Ignore with Text may not be displayed when calls are from

entries identified as No Caller ID, Private (Restricted ID), or

Unavailable ID.

Note

even if your phone is locked or your account is restricted.

Answering a Roam Call With Call Guard Enabled

During an emergency call, press OPTIONS (right softkey) to

Call Guard is an option that helps you manage your roaming

charges when making or receiving calls while outside the home

network. Please see “Roaming” on page 91 for more information

about roaming.

display your options. Highlight an option and press

ⅷ Transfer Audio to switch the call to a Bluetooth device (if

applicable).

ⅷ Contacts to display your Contacts list.

ᮣ

Press

, and then press

to answer the call. (See

“Call Guard” on page 92 for additional information.)

ⅷ Voice Memo to record the other party’s voice.

ⅷ Phone Info to display your Phone Info menu.

Ending a Call

Press MY PHONE# (left softkey) to display your phone

Tip

ᮣ

Press

number during an emergency call.

Missed Call Notification

When an incoming call is not answered, your screen displays the

Exiting Emergency Mode

If you end the emergency call by pressing

Emergency mode. Press

, your phone enters

to exit Emergency mode.

Missed Call log. Press

to dial the phone number.

ⅷ Contact Details to display information about the caller stored in

your Contacts.

Enhanced 911 (E911) Information

This phone features an embedded Global Positioning System

(GPS) chip necessary for utilizing E911 emergency location

services where available.

ⅷ Main Menu to display the phone’s main menu.

ⅷ 3-Way Call to open a call with two other parties.

ⅷ Contacts to display your Contacts list.

When you place an emergency 911 call, the GPS feature of your

phone seeks information to calculate your approximate location.

Depending on several variables, including availability and access

to satellite signals, it may take up to 30 seconds or more to

determine and report your approximate location.

ⅷ Voice Memo to record the other party’s voice.

ⅷ Phone Info to display information about your phone.

Additional in-call options can be accessed by pressing the

following keys or buttons during a call.

Always report your location to the 911 operator

when placing an emergency call. Some

designated emergency call takers, known as Public

Safety Answering Points (PSAPs) may not be

equipped to receive GPS location information from

your phone.

Important

ⅷ Press the volume button to adjust the receiver volume.

ⅷ Press MUTE or UNMUTE (left softkey) to switch between the

mute or unmute mode. (Muting applies to your voice, not the

other party’s.)

ⅷ Press

to turn the speaker on. Press again to turn it off.

In-Call Options

Pressing OPTIONS (right softkey) during a call displays a list of

Because of higher volume levels, do not place the

phone near your ear during speakerphone use.

WARNING

available in-call features.

ⅷ Transfer Audio to switch the call to a Bluetooth device (if

applicable).

ⅷ Save to save the current call’s phone number in your Contacts.

End-of-Call Options

Saving a Phone Number

After you have finished your call, the phone will display an end-of-

call message. “Call ended” and the duration of the call will

alternately flash beneath the caller’s name (if already in your

Contacts) or the caller’s number (if available). Press any key below

to select an option; press any other key to stop the end-of-call

display.

Your phone can store up to 300 Contacts entries and each entry

can contain up to seven phone numbers. (See section 2D,

“Contacts,” on page 47.)

1. From standby mode, enter a phone number and press

OPTIONS (right softkey) > Save. (If this is the first time you

are saving an entry to Contacts, skip to step 3.)

ⅷ Press

to call a highlighted entry.

2. Select New Entry or Existing Entry.

ⅷ Press

to display all history for a highlighted entry.

3. If you chose New Entry, select a number type, and then

enter the new entry name.

ⅷ Press OPTIONS (right softkey) to display the Recent History

options. (See “History Options” on page 44 for details.)

– or –

ⅷ Press SEND MESSAGE (left softkey) to send a text or picture

If you chose Existing Entry, select an entry to which you

message.

want to save the number, and then highlight a number type

ⅷ Press

to return to standby mode.

and press

ⅷ Press

or simply wait 10 seconds to return to where you

4. Press DONE (left softkey) to save the entry.

were before the call (if applicable).

If you press a key other than one of those above, the Recent

History screen is displayed. (See “Viewing History” on page 43.)

Finding a Phone Number

You can search Contacts entries for phone numbers that contain a

specific string of numbers.

You can have multiple pauses in a phone number and

combine two-second and hard pauses.

Note

To dial or save phone numbers with pauses:

1. Enter four or more digits of the number in standby mode.

(The more numbers you enter, the more specific the search

becomes.)

1. Enter all or part of a number.

2. Press OPTIONS (right softkey) > Hard Pause or 

2-Sec. Pause.

2. All Contacts entries matching the entered numbers will be

3. Enter additional numbers.

displayed. Highlight an entry and press

number.

to dial the

4. Press OPTIONS (right softkey) > Save > New Entry or

Existing Entry to save the number in your Contacts. (See

steps 3 and 4 in “Saving a Phone Number” on page 18.)

Dialing and Saving Phone Numbers With

Pauses

– or –

You can dial or save phone numbers with pauses for use with

automated systems, such as voicemail or credit card billing

numbers.

Press

to dial the number.

5. Press

Hard Pause in step 2.

to send the additional number if you selected

There are two types of pauses available on your phone:

ⅷ Hard Pause sends the next set of numbers when you 

press

ⅷ 2-Sec. Pause automatically sends the next set of numbers after

two seconds.

Dialing From the Contacts List

Speed Dialing

You can store up to 98 numbers in your phone’s speed dial

memory to make contacting friends and family easier.

1. From standby mode, press CONTACTS (right softkey).

2. Highlight the entry you want to call.

You must assign a speed dial number to the existing phone

number beforehand. See “Assigning Speed Dial Numbers” on

page 51.

3. Press

to dial the entry’s default phone number.

– or –

Press the navigation key left or right to show another number

To use speed dial for locations 2-9:

for the entry and press

ᮣ

From standby mode, press and hold the appropriate key for

approximately two seconds.

Plus (+) Code Dialing

To use speed dial for locations 10-99:

From standby mode, press appropriate keys, and then 

When placing international calls, use Plus Code Dialing to

automatically enter the international access code for your

location. (This feature is subject to network availability.)

ᮣ

press

1. Press and hold

2. Dial the country code and phone number you’re calling, and

press . The access code for international dialing will

automatically be dialed, followed by the country code and

phone number.

to display “+” on your phone screen.

The display confirms that the number has been dialed when it

shows “Connecting...”.

Speed dialing may not be available when you are roaming;

when you are roaming off the home network, you must

always dial using 11 digits (1+ area code + number).

Note

Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use either

of the following abbreviated dialing features.

Contacts Match will not retrieve numbers if you enter 911

or reserved three-digit service numbers such as 411 or

711.

Note

2. Press

to call the displayed number.

ⅷ Contacts Match – Retrieve any number saved in your Contacts

by entering the four or more digits of any part of the number.

If there are two or more matched numbers in your Contacts,

a list is displayed. Highlight the name or the phone number

ⅷ Prepend – Prepend the first five or six digits (for example, the

area code and prefix) to any four or five digits you enter.

you want to call, and then press

to place a call.

To activate the Prepend feature:

Entering Text

1. Press

> Settings > Others > Call Setup > 

Abbrev. Dial.

Selecting a Text Input Mode

2. Select Prepend > On.

Your phone provides convenient ways to enter words or symbols

whenever you are prompted to enter text.

3. Enter a five- or six-digit number and press

To place a call using Abbreviated Dialing:

1. Press OPTIONS (right softkey) > Text Mode on the message

entry screen.

1. Enter the four or more digits of any part of a Contacts entry’s

phone number to use the Contacts Match feature.

– or –

Press TEXT MODE... (right softkey) from other text input

Enter the last four or five digits of the number to use the

Prepend feature.

screens, such as Contacts or Signature.

2. Select one of the following options:

Ⅲ Delete All to delete all text (if applicable).

Ⅲ Select Text to select text for copying or cutting (if

applicable).

If you see a triangle to the right of a menu option, you can

switch between related menus by pressing the navigation

key right or left.

Tip

Ⅲ Add Word to store words that you frequently use.

Ⅲ Text Settings to display the Text Entry settings menu.

Ⅲ ABC to use multi-tap entry – press

once for “a,” twice

for “b,” or three times for “c.” (See page 23.)

When entering text, press * (Shift) to change the

capitalization style as Predictive > PREDICTIVE >

predictive (Predictive mode), or as Abc > ABC > abc (ABC

mode). The selected style is displayed in the bottom-right

corner of the screen, above the right softkey label (if

applicable).

Tip

Ⅲ Predictive to enter text using a predictive text input system

that reduces the number of keypresses required while

entering a word. (See page 24.)

Ⅲ Number to enter numbers.

Ⅲ Symbols to enter symbols.

Ⅲ Smileys to enter smile icons.

Text Entry Settings

Ⅲ Emoticons to enter “emoticons.” (This is available, for

example, when composing a message, or when editing a

Schedule or To Do description in Calendar.)

1. Press OPTIONS (right softkey) > Text Mode > Text Settings

on the message entry screen.

– or –

Ⅲ Web Shortcut to enter Web shortcuts (for example, www.,

http://, or .com).

Press TEXT MODE... (right softkey) > Text Settings from

other text input screens.

Ⅲ Paste List to paste copied or cut text (if applicable).

– or –

Ⅲ Select Language to select the language (English or

Spanish).

From standby mode, press

> Settings > Text Entry.

2. Highlight an option and press

Ⅲ Input Language to select the language (English or Spanish).

ABC Input Mode

In the ABC input mode, also known as multi-tap entry, you press

keys one, two, three, or four times to enter the letters you see on

the keypad. For example, press

or three times for “c”; or press

Ⅲ My Words to edit or delete custom words you have added

to the predictive text database.

once for “a,” twice for “b,”

once for “p,” twice for “q,”

●

Add Word to store words that you frequently use.

three times for “r,” or four times for “s.”

Ⅲ Word Prediction to automatically display the word that may

follow the current text input.

1. Select the ABC input mode. (See page 21.)

Ⅲ Word Completion to suggest possible words based on

letters you have entered when the Predictive Text input

mode is turned on (see page 21).

2. Press the corresponding keys repeatedly until the correct

letter appears. (For example, to enter the word “Bill,” press

twice,

three times again.) (If you make a mistake, press

a single character. Press and hold to erase an entire word.)

three times,

three times, and

Ⅲ Word Scan to allow the predictive text input system to suggest

words it finds in Contacts and messages.

to erase

Ⅲ Word Choice List to display the word choice list.

By default, the first letter of an entry is capitalized and the

following letters are lowercased. After a character is entered, the

cursor automatically advances to the next space after two

seconds or when you enter a character on a different key.

Ⅲ Auto-Complete to show completed words or phrases that

match partial words or phrases you have entered

regardless of whether the ABC input mode or the Predictive

Text input mode is turned on.

Ⅲ Help to view the Predictive Text instructions.

Adding a Word to the Predictive Text Database

Predictive Text Input

If a word you want to enter is not displayed as an option while you

are in the Predictive Text input mode, add it to the database.

Predictive Text input, also known as T9 Text Input, lets you enter

text by pressing keys just once per letter. (To select the Predictive

Text input mode when entering text, see page 21.)

1. While you are in the Predictive Text input mode, select 

<Add Word> in a word choice list.

Predictive Text input uses an intuitive word database to analyze

the letters you enter and create a suitable word. (The word may

change as you type.)

– or –

Press OPTIONS (right softkey) > Text Mode > Add Word on

1. Select the Predictive Text input mode.

the message entry screen.

– or –

2. Press the corresponding keys once per letter to enter a

word. A word choice list opens and shows words starting

with the letters you have entered thus far. (For example, to

Press TEXT MODE... (right softkey) > Add Word from other

text input screens.

enter the word “Bill,” press

make a mistake, press

.) (If you

to erase a single character.

2. Enter a word and press SAVE (left softkey). The word will

appear as an option the next time you scroll through options

during the Predictive Text input mode.

Press and hold

to erase an entire word.)

If the word you want is not displayed after you have entered all the

letters, press the navigation key down to scroll through additional

word selections. To accept a word and insert a space, press

To edit or delete the words you have added:

Simple Data Exchange

1. Press OPTIONS (right softkey) > Text Mode > Text Settings >

My Words on the message entry screen.

This feature makes it easy to select certain information from a text

or picture message and automatically save it or use it in a related

application.

– or –

Press TEXT MODE... (right softkey) > Text Settings > 

My Words from other text input screens.

Simple Data Exchange works with these types of information:

ⅷ Email addresses

– or –

From standby mode, press

> Settings > Text Entry >

ⅷ Street addresses

My Words.

ⅷ Phone numbers

2. Highlight a word and press OPTIONS (right softkey).

3. Highlight an option and press

Ⅲ Edit to edit a word in My Words. When finished, press SAVE

(left softkey) to save your changes.

ⅷ Web addresses (URLs)

Email Address Options

ᮣ

Highlight an email address (or a saved Contacts entry name

in the From/To field in the message details screen), press

, and select an option:

Ⅲ Delete to delete a word in My Words. Press YES (left

softkey) to confirm the deletion.

Ⅲ Send Message to select Text Message or Picture Messaging.

The selected messaging application will open and the email

address will appear as the message’s recipient.

For more information about Predictive Text (T9), visit the Nuance

website at http://www.nuance.com/t9/textinput/.

Ⅲ Share to select Text Message. The selected application will

open and the email address will appear in the message

body.

Ⅲ Save to Contacts to save the email address in Contacts.

Ⅲ Save to Contacts to save the phone number in Contacts.

Ⅲ Contact Details to display the Contacts entry if the email

address is already saved in Contacts.

Ⅲ Contact Details to display the Contacts entry if the phone

number is already saved in Contacts.

Street Address Options

Web Address (URL) Options

ᮣ

Highlight a street address, press

, and select an option:

ᮣ

Highlight a Web address (URL), press

option:

, and select an

Ⅲ Share to select Text Message. The selected application will

open and the address will appear in the message body.

Ⅲ Browse to open the browser to the Web page.

Ⅲ Save to Contacts to save the address in Contacts.

Ⅲ Share to select Text Message. The selected application will

open and the Web address will appear in the message

body.

Phone Number Options

Ⅲ Save to Contacts to save the Web address in Contacts.

ᮣ

Highlight a phone number (or a saved Contacts entry name

in the From/To field in the message details screen), press

, and select an option:

Ⅲ Call to call the phone number.

Ⅲ Prepend to prepend a number to the phone number.

Ⅲ Send Message to select Text Message or Picture Messaging.

The selected messaging application will open and the

phone number will appear in the To: field.

Ⅲ Share to select Text Message. The selected application will

open and the phone number will appear in the message

body.

Display Settings (page 27)

Display Settings

2B. Settings

Changing the Screen Saver

You can set a screen saver to display while in standby mode.

ࡗ

Volume Settings (page 29)

Ringer Settings (page 30)

Messaging Settings (page 33)

Location Settings (page 34)

Airplane Mode (page 35)

TTY Use (page 35)

Using the Hearing Aid Device Compatibility Function

(page 36)

1. Press

> Settings > Display > Screensaver.

2. Select a screen saver option by pressing the navigation key

up or down, and select a screen saver.

3. Press

Changing the Brightness

You can adjust the brightness on the main screen. When the

Power Save Mode is on, and when the Backlight Dim setting is

Always Dim, you cannot change this setting.

ࡗ

Phone Setup Options (page 37)

Security Settings (page 38)

1. Press

> Settings > Display > Brightness.

2. Highlight a brightness level and press

Ⅲ If you select Contacts, select All Contacts, or select 

Changing the Backlight Time Length

Select how long the main screen and keypad remain backlit after

any keypress is made.

One Contact and then select an entry.

3. Select a picture ID option by pressing the navigation key up

or down, and then select an image.

ᮣ

Press

> Settings > Display > Backlight > Backlight Dim

Ⅲ If you select Take New Picture, press

4. If you are satisfied with the image on the preview screen,

press

to take a picture.

or Backlight Off.

Ⅲ If you select Backlight Dim, select Always Bright, 

Always Dim, or a preset length of time to elapse before 

the screen backlight dims.

Power Save Mode

This feature helps conserve your battery power by automatically

adjusting settings for certain phone features.

Ⅲ If you select Backlight Off, select a preset length of time to

elapse before the screen and keypad backlights turn off.

(When you select Always Bright for the Backlight Dim

setting above, the keypad backlight will turn off after about

one minute.)

1. Press

> Settings > Display > Power Save Mode.

2. Select On. (Select Off to deactivate this feature.)

Long backlight settings reduce the battery’s talk and

standby times.

Note

3. Read the message and press CONTINUE (left softkey).

Changing the Clock/Calendar Display

Choose which design of clock or calendar you want to display in

standby mode.

Selecting a Picture ID

You can select an image as a picture ID.

1. Press

> Settings > Display > Clock/Calendar.

1. Press

> Settings > Display > Picture ID.

2. Highlight a display option and press

2. Select Contacts, Unsaved Numbers, or Private / Unknown.

. (See “Entering Text” on page 21.)

1. Press

Font Size.

> Settings > Others > Accessibility > 

Changing the Text Greeting

The screen displays a text greeting in standby mode. Choose the

phone’s default greeting (“Sanyo”), or enter your own custom

greeting.

2. Highlight Normal Font or Large Font. You can see the

highlighted font size in the New Size window.

3. If you are satisfied with the font size, press SAVE (left

1. Press

> Settings > Display > Greeting.

softkey).

2. Select Default or Custom.

Ⅲ If you select Custom, enter a custom greeting and press

Display Language

You can choose to display your phone’s onscreen menus in

English or in Spanish.

Changing the Phone’s Menu Style

Choose the layout of your phone’s menu.

1. Press

> Settings > Others > Language.

2. Select English or Español.

1. Press

to display the main menu.

2. Press OPTIONS (right softkey) > List View or Grid View.

Volume Settings

Changing the Font Size

Adjust the display and text input font size. This setting does not

affect all screens.

Adjusting the Phone’s Volume Settings

Adjust your phone’s volume settings to suit your needs and your

environment.

ᮣ

From the main menu, press OPTIONS (right softkey) > 

Large Font or Normal Font to change the font size.

1. Press

> Settings > Volume.

– or –

2. Select Incoming Ringer, Playback Volume, Power Up/Down,

or Key Beeps.

Silence All

The Silence All option allows you to mute all sounds without

turning your phone off.

Ⅲ If you select Power Up/Down, select On or Off.

Ⅲ If you select Key Beeps, select Tone Volume or Tone Type.

To activate Silence All:

3. Select a volume level or type and press

ᮣ

Press and hold the volume button down in standby mode.

(The screen will display “Silence All.”)

To change the incoming ringer or playback volume:

1. Press the volume button up or down for most applications,

including playing sounds. A volume setting screen is

displayed.

To deactivate Silence All:

ᮣ

Press the volume button up repeatedly to select a volume

level.

2. Press the volume button up or down to select the volume

level, and then press

or close the phone. (When the

Ringer Settings

Ringer and Playback tabs are both displayed, you can switch

between tabs by pressing the navigation key left or right.

Ringer Types

Ringer types help you identify incoming calls and messages. You

can assign ringer types to individual Contacts entries, types of

calls, and types of messages.

You can make the incoming ringer vibrate at any volume

level by pressing VIBRATE (left softkey) on the volume

setting screen.

Tip

Selecting Ringer Types for Incoming Calls

1. Press

> Settings > Ringers > Incoming Calls.

“Selecting a Ringer Type for an Entry” on page 51.

2. Select Contacts, Unsaved Numbers, or Private / Unknown.

Ⅲ If you select Contacts, select All Contacts, or select 

One Contact and then select an entry.

Selecting Ringers for Voicemail, Calendar, and

Power Up/Down

1. Press

> Settings > Ringers.

3. Select a ringer option by pressing the navigation key up or

down, and then select a ringer. (See “Getting New Ringers”

on this page if you selected Downloaded > Get New.)

2. Select Voicemail, Calendar, or Power Up/Down.

3. Select a ringer option by pressing the navigation key up or

down, and then select a ringer.

Selecting Ringers for Messages

Getting New Ringers

1. Press

> Settings > Ringers > Messages.

A wide variety of new ringers is available from the download

menus, and you can access them right from your phone.

(Additional charges may apply, but some are free.)

2. Select Text Message or Picture Messaging.

3. Select Contacts, Unsaved Numbers, or Private / Unknown.

Ⅲ If you select Contacts, select All Contacts, or select 

One Contact and then select an entry.

1. Press

> Settings > Ringers.

2. Select a ringer type category (Incoming Calls, Voicemail,

Messages, etc.) and any applicable subcategories until you

arrive at the “Assign?” screen.

4. Select a ringer option by pressing the navigation key up or

down, and then select a ringer.

Ringer types can be assigned from the Contacts menu. See

Tip

3. Select Downloaded > Get New. (The Digital Lounge will

launch and display the Ringers menu.)

4. Use the navigation key and keypad to search through

available ringers. When you find one you want, highlight it

and press

5. To purchase the ringer, highlight Buy and press

(The ringer will download automatically.)

. 

When the ringer volume is set to Silence All or Vibrate All,

Voice Guide does not work.

Note

6. When the download is finished, select an option to continue:

Ⅲ Listen to listen to the ringer.

The voice guide language depends on the language

selected in MENU/OK > Settings > Others > Language >

English or Español.

Ⅲ Set as to assign the ringer to a call or message type or to a

specific contact.

Ⅲ Shop to browse for other items to download.

Selecting Vibration Patterns

Setting Up Voice Guide

With this feature, you can select vibration patterns for incoming

calls, messages, alarms, and scheduled events.

Voice Guide allows you to hear voice prompts and spoken

numbers or key names as you press a key, and also to hear

menus and options, and Contacts names, email addresses, 

URLs, etc., as you highlight each item onscreen. (The default

setting is Off.)

1. Press

> Settings > Others > Accessibility > 

Vibrate Type.

2. Select Incoming Calls, Voicemail, Messages, 

Alarm/Calendar, or Power Up/Down.

1. Press

> Settings > Others > Accessibility > 

Voice Services > Voice Guide.

3. If you select Messages, select the message type. Otherwise

skip to step 4.

2. Select On or Off.

4. Highlight a vibration pattern and press

2. Select My Phone Number, Other, or None. If you select

Messaging Settings

Other, enter a callback number and press

Adding a Customized Signature

Your phone’s advanced messaging capabilities let you send 

and receive many different kinds of messages without placing a

voice call.

Add a customized signature to each message you send.

1. Press > Messages > Settings > Signature.

Messaging settings allow you to decide how your phone notifies

you of new messages, create a signature with each sent

message, and create your own preset messages.

2. Select On. (If you do not wish to attach a signature to your

outgoing messages, select Off.)

3. Enter a signature and press

Setting Message Notification

When you receive a message, your phone notifies you by

displaying an icon on your display screen. You can also choose to

be notified with a message notification on your display screen.

Press OPTIONS (right softkey) > Add Signature to insert

your signature on the message entry screen.

Tip

Managing Preset Messages

1. Press

> Messages > Settings > Notification.

Your phone is loaded with 20 preset messages to help make

sending text messages easier. Customize or delete these

messages, such as “Where are you?,” “Let’s get lunch,” and

“Meet me at” to suit your needs, or add your own messages to

the list.

2. Select Msgs and Icon or Icon Only.

Text Messaging Settings

Setting a Callback Number

To edit or delete a preset message:

With this feature, you can specify the callback number which your

recipients see when you send text messages.

1. Press

> Messages > Settings > Preset Messages. 

(The list of preset messages will be displayed.)

1. Press

> Messages > Settings > Callback Number.

2. To edit or delete a message, highlight it and press OPTIONS

Turning Location on will allow the network to detect your

position using GPS technology, making some applications

and services easier to use. Turning Location off will disable

the GPS location function for all purposes except 911, but

will not hide your general location based on the cell site

serving your call. No application or service may use your

location without your request or permission. GPS-enhanced

911 is not available in all areas.

Note

(right softkey).

3. Select Edit, edit the message, and press

– or –

Select Delete > YES (left softkey) to delete the message.

(You can also reset all messages by selecting 

Reset all messages > YES [left softkey].)

To enable your phone’s Location feature:

1. Press > Settings > Others > Location. (You will see the

To change the language of the preset message:

1. Press

> Messages > Settings > Preset Messages.

Location disclaimer.)

2. Press OPTIONS (right softkey) > Select Language.

2. Read the disclaimer and press

3. Select English or Spanish.

3. Select On.

When the Location feature is on, your phone’s standby screen will

Location Settings

display the

icon. When Location is turned off, the

icon will

be displayed.

Your phone is equipped with a Location feature for use in

connection with location-based services.

The Location feature allows the network to detect your position.

Turning Location off will hide your location from everyone 

except 911.

Airplane Mode

TTY Use

Airplane Mode allows you to use many of your phone’s features,

such as games and voice memos, when you are in an airplane or

in any other area where making or receiving calls or Web

connections is prohibited. When you set your phone to Airplane

Mode, it cannot send or receive any calls or access online

information.

A TTY (also known as a TDD or Text Telephone) is a

telecommunications device that allows people who are deaf, hard

of hearing, or who have speech or language disabilities, to

communicate by telephone.

Your phone is compatible with select TTY devices. Please check

with the manufacturer of your TTY device to ensure that it

supports digital wireless transmission. Your phone and TTY device

will connect via a special cable that plugs into your phone’s

headset jack. If this cable was not provided with your TTY device,

contact your TTY device manufacturer to purchase the connector

cable.

1. Press

> Settings > Others > Airplane Mode.

2. Read the disclaimer and press

3. Select an option:

Ⅲ On to activate Airplane Mode when you select this option.

Airplane Mode will be deactivated again when you turn the

phone off.

When establishing your wireless service, please call your service

provider via the state Telecommunications Relay Service (TRS) by

first dialing

Ⅲ Off to deactivate Airplane Mode.

Ⅲ On Power-up to activate Airplane Mode when you turn the

phone on. Airplane Mode will remain activated even if you

turn the phone off and on again.

To turn TTY Mode on or off:

1. Press

> Settings > Others > Accessibility > TTY. 

(You will see an informational message.)

While in Airplane Mode, your phone’s screen will display 

“Phone Off.”

2. Press

“Using Your Phone With a Hearing Aid Device” on page 106.

3. Select On to turn TTY mode on.

– or –

Using the Hearing Aid Device

Compatibility Function

Select Off to turn TTY mode off.

In TTY Mode, your phone will display the TTY icon if a TTY

device or an optional headset is connected to your phone.

Note

Your phone has been tested for hearing aid device compatibility

and rated. To use this function effectively, set the hearing aid

setting to on.

When enabled, TTY mode may impair the audio quality of

non-TTY devices connected to the headset jack.

1. Press

> Settings > Others > Accessibility > 

Hearing Aid.

911 Emergency Calling

WARNING

2. Read the disclaimer and press

It is recommended that TTY users make emergency

calls by other means, including Telecommunications

Relay Services (TRS), analog cellular, and landline

communications. Wireless TTY calls to 911 may be

corrupted when received by public safety answering

points (PSAPs), rendering some communications

unintelligible. The problem encountered appears

related to software used by PSAPs. This matter has

been brought to the attention of the FCC, and the

wireless industry and the PSAP community are

currently working to resolve this.

3. Select On or Off.

Ⅲ On to use a hearing aid device with your phone.

Ⅲ Off to use your phone without a hearing aid device.

For more information about hearing aid device compatibility, see

2. Select Beep Each Minute, Out of Service, or Connect.

Phone Setup Options

3. Select On or Off.

Navigation Key Shortcuts

My Favorites

You can use the navigation keys as shortcuts to access specific

menu items directly from standby mode. You can reassign the

default shortcuts to the menu items you choose.

Your phone offers you the option of assigning a shortcut to a

favorite or often-used function. Pressing FAVORITES (left softkey)

in standby mode will launch your personally designated shortcut.

1. Press

2. Highlight the navigation key you wish to reassign and 

press

> Settings > Others > Navigation Keys.

1. Press FAVORITES (left softkey) to display the My Favorites

list.

2. Select <Add Favorite>.

3. Using the navigation key or your keypad, select a function.

3. Using the navigation key or your keypad, select functions to

be assigned to the My Favorites list.

4. Press ASSIGN (left softkey) to save. (For options with

submenu levels, such as Settings, you can assign submenu

options by navigating to the desired option before pressing

ASSIGN.)

4. Press ASSIGN (left softkey) to save.

While the My Favorites list is displayed, press OPTIONS

(right softkey) to customize the list or to remove assigned

functions according to your needs.

Tip

Alert Notification

Set your phone to alert you with an audible tone when you change

service areas, once a minute during a voice call, or when a call

has been connected.

1. Press

> Settings > Others > Alerts.

the Lock Code” on page 39.

Call Answer Mode

Headset Mode

Select how to answer incoming calls on your phone whether by

Set the sound output destination of incoming ringer on your

phone.

pressing

and

or any key (except softkeys, side buttons,

), or by opening the phone.

, 

1. Press

> Settings > Others > Headset Mode.

1. Press

> Settings > Others > Call Setup > Call Answer.

2. Highlight an option and press

2. Select Talk Key, Any Key, or Flip Open.

Ⅲ Normal to output incoming ringer sound through headset

and speaker.

Auto-Answer Mode

Set your phone to automatically pick up incoming calls.

Remember, your phone will answer calls in auto-answer mode

even if you are not present.

Ⅲ Headset Only to output the incoming ringer sound only

through headset.

Security Settings

1. Press

> Settings > Others > Call Setup > Auto-Answer.

2. Highlight an option and press

Ⅲ Hands-free to answer calls automatically when the phone

Accessing the Lock Phone Menu

You must enter your lock code to view the Lock Phone menu.

is connected to an optional headset or hands-free device.

1. Press

> Settings > Lock Phone.

Ⅲ Speakerphone to answer calls automatically in

speakerphone mode.

2. Enter your lock code and press CONTINUE (left softkey).

3. Highlight the time you would like your phone to wait before

The first time you access the Lock Phone menu, you will be

advised to change the default lock code by pressing

CHANGE (left softkey). Follow steps 4 and 5 in “Changing

Note

answering and press

3. Select Change Lock Code.

If you can’t recall your lock code, try using the last four

digits of your wireless phone number or check your lock

code hint. (See “Changing the Lock Code,” below.) If this

doesn’t work, contact your service provider.

Tip

4. Enter your new lock code, and then press CONTINUE (left

softkey).

5. Re-enter your new lock code, and then press SAVE (left

softkey).

Your Phone’s Lock Feature

Each time you change the lock code, you will be prompted to

create a lock code hint. Press YES (left softkey) or NO (right

softkey) when prompted.

Locking Your Phone

When your phone is locked, you can only receive incoming calls

or make calls to 911.

To display or edit the lock code hint:

ᮣ

Press

> Settings > Lock Phone > Lock Code Hint.

1. Press

> Settings > Lock Phone.

Parental Controls

2. Enter your lock code and press CONTINUE (left softkey).

This feature allows parents to prevent children from using certain

functions on the phone.

3. Select Lock Now.

Unlocking Your Phone

Activating Parental Controls

1. From standby mode, press UNLOCK (left softkey).

2. Enter your lock code and press CONTINUE (left softkey).

1. Press

> Settings > Parental Controls > On/Off > On.

2. Enter your new code, and then press CONTINUE (left

softkey).

Changing the Lock Code

1. Press

> Settings > Lock Phone or Reset/Delete.

3. Re-enter your new code, and then press SAVE (left softkey).

2. Enter your lock code and press CONTINUE (left softkey).

Repeat the procedure above with each change from Off to On.

Also, while set to On, a user will be required to enter the current

code to access the Parental Controls menu.

5. Select Allowed Contacts > All Contacts or Choose Contacts

to allow voice calls and text messages to and from all

Contacts entries or selected Contacts entries.

Ⅲ If you select Choose Contacts, select <Add Contact>, and

then choose a member from the list. If you want to remove

a member from the list, highlight the member and press

REMOVE (left softkey).

Changing the Parental Control Code

1. Press

> Settings > Parental Controls > 

Change Parental Control Code.

If you selected On in step 4, you cannot add, edit, and

delete any Contacts or Group entries.

Note

2. Enter your new code, and then press CONTINUE (left

softkey).

3. Re-enter your new code, and then press SAVE (left softkey).

Restricting Web, Camera, and Location Mode

Restricting Voice Calls and Text Messages

1. Press

> Settings > Parental Controls > Restriction.

1. Press

> Settings > Parental Controls > Restriction.

2. Read the message and press CONTINUE (left softkey).

3. Select an option:

Ⅲ Web to prevent using the browser.

Ⅲ Camera to prevent using the camera.

3. Select an option:

Ⅲ Voice Calls to restrict incoming and outgoing voice calls

except those placed to 911.

Ⅲ Force Location On to prevent changing the Location setting

from On to Off. (See “Location Settings” on page 34.)

Ⅲ Text Messaging to restrict sending text messages except to

designated recipients.

4. Select On.

4. Select On/Off > On. If you selected Voice Calls in step 3,

read the message and press OK (left softkey).

Deleting Phone Content

Resetting Your Phone and Phone Content

You can quickly and easily delete all the content that you have

created or stored in your phone.

This option lets you clear different types of personal information

stored on your phone, reset your phone to factory settings, or

both.

1. Press

> Settings > Reset/Delete.

1. Press

2. Enter your lock code and press CONTINUE (left softkey).

3. Highlight an option and press

> Settings > Reset/Delete.

2. Enter your lock code and press CONTINUE (left softkey).

3. Select Delete Stuff.

4. Highlight an option and press

Ⅲ Reset Settings to restore all the factory defaults, including

ringer types and display settings. Contacts, History,

Calendar, and Messages are not affected.

Ⅲ Text Messages to delete all text messages.

Ⅲ Call Logs to delete all call history from the phone.

Ⅲ Browser Cookies and Cache to delete all Web cookies and

all Web cache memory saved in the phone.

Ⅲ Reset Phone to reset all settings and erase all data on your

phone.

Ⅲ Downloaded Content to delete all data downloaded to your

phone.

Ⅲ Reset Picture Messaging to reset your authentication ID for

your picture messaging account.

Ⅲ Contacts to delete all of your Contacts including speed dial

numbers saved in your Contacts.

4. Read the message and press the left softkey 

(RESET SETTINGS, RESET PHONE, or RESET PIC. MSG).

Ⅲ Voice Memo to delete all voice data and call memos saved

in the phone.

Ⅲ My Albums to delete all pictures stored in My Albums.

Ⅲ All Stuff to delete everything in all the above categories.

5. Read the message and press DELETE (left softkey).

Security Features for Web Services

Net Guard

When you first connect to the Web, the Net Guard will be

displayed to confirm that you want to connect. The Net Guard

helps you avoid accidental connections. You can disable the Net

Guard in the future by selecting Auto-Connect when you see Net

Guard displayed.

Enabling Web Services

Although Web services are disabled on your phone by default, you

may enable them at any time.

To enable Web services:

To change your Net Guard settings:

1. Press

> Settings > Others > Web > Web Off.

ᮣ

Press

> Settings > Others > Web > Net Guard.

2. Read the message and press the left softkey to sign in.

Ⅲ On to activate the Net Guard.

Disabling Web Services

Ⅲ Off to deactivate the Net Guard.

You can disable Web services again without turning off your

phone; however, you will not have access to all Web services,

including Web browsing and messaging. Disabling Web services

will avoid any charges associated with these services. While

signed out, you can still place or receive phone calls, check

voicemail, and use other voice services.

When enabled, Net Guard appears only once as long as you

have not turned the phone off and on.

Note

To disable Web services:

1. Press

> Settings > Others > Web > Web On.

2. Read the disclaimer and press DISABLE (right softkey) to

sign out.

Viewing History (page 43)

Each entry contains the phone number (if available) and Contacts

entry name (if the number is in your Contacts). Duplicate calls

(calls from the same number) may appear only once on the list.

2C. History

1. Press

> History.

2. Highlight an entry and press

ࡗ

History Thread (page 44)

History Details (page 44)

History Options (page 44)

Making a Call From History (page 45)

Saving a Number From History (page 45)

Making a New Group Entry From History (page 45)

Deleting History (page 46)

You can also press TALK from standby mode to

display your recent calls.

Shortcut

Note

History records only calls that occur while the phone is

turned on. If a call is received while your phone is turned

off, it will not be included in history.

If you return a call from the voicemail menu, it will not be

included in your phone’s history.

History Icons

You can determine if an entry was an incoming, outgoing, or

missed call from the icons shown below.

Viewing History

History is a list of the last 60 phone numbers (or Contacts entries)

for voice calls you placed, accepted, or missed. History makes

redialing fast and easy. It is continually updated as new numbers

or entries are added to the beginning of the list and the oldest

entries are removed from the bottom of the list.

– Incoming Call

– Outgoing Call

– Missed Call

From History” on page 45.)

is also displayed according to the type of call. (See “History

Options” below.)

History Thread

To make a call from the History details screen, press

The History thread screen shows all history for a selected entry.

To display a History thread:

History Options

1. Press

> History.

You may see several menu items on the onscreen menu. Press

OPTIONS (right softkey) for additional options.

2. Highlight an entry and press

Text messages are included in the History thread.

Tip

ⅷ Call to call the selected entry.

ⅷ Send Message to send a message to the selected entry.

ⅷ New Group to create a new Group entry.

History Details

ⅷ Contact Details to display information about the entry if it has

already been saved in your Contacts.

To display History details:

1. Press

> History.

ⅷ Save Contact to save a phone number. (See “Saving a Number

2. Highlight an entry from the list and press

thread is displayed.

. The History

ⅷ Delete to delete the entry.

ⅷ Delete All to delete all History entries. (See “Deleting History”

on page 46.)

3. Highlight an entry and press

The History details screen shows the number type (Mobile, Home,

etc.), phone number, the caller’s name (if the number is already in

your Contacts), and date and time of the call. An onscreen menu

ⅷ Prepend to add numbers to the beginning of the selected

number.

4. If New Entry was selected, select a number type, and then

If the Parental Controls feature is on and Voice Calls or Text

Messaging is restricted, you cannot use the New Group or

Save Contact menu. (See page 39.)

Note

enter the new entry name.

– or –

If Existing Entry was selected, select an existing entry to

which you want to save the number, and then highlight a

Making a Call From History

number type and press

5. Press DONE (left softkey) to save the entry.

1. Press

> History.

2. Highlight an entry and press

Making a New Group Entry From

History

You cannot make calls from History entries identified as 

Note

No Caller ID, Private (Restricted ID), or Unavailable ID.

You can make and save a new group entry from History.

Saving a Number From History

1. Press

> History > OPTIONS (right softkey) > New Group.

2. Read the message and press START (left softkey).

Your phone can store up to 300 Contacts entries, and each

Contacts entry can store up to a total of seven phone numbers.

3. Select the check box for each member you wish to add and

press CONTINUE (left softkey).

1. Press

> History.

Press OPTIONS (right softkey ) > Enter New Address or

Contacts to enter a new address or a phone number or to

select an entry from your Contacts.

Tip

2. Highlight a History entry and press OPTIONS (right softkey) >

Save Contact.

3. Select New Entry or Existing Entry.

4. Enter a group name and press

> SAVE (left softkey).

Deleting History

You can delete individual or all entries in your History.

1. Press

> History.

2. Highlight an entry you wish to delete and press OPTIONS

(right softkey) > Delete.

Select Delete All to delete all entries.

Tip

3. If you are certain you want to delete one or all entries from

History, press DELETE (left softkey).

Displaying Contacts Entries (page 47)

About Contacts

2D. Contacts

Your phone can store up to 300 Contacts entries. Each entry can

contain up to seven phone numbers, three email addresses, and

one Web address. You can also add Contacts entries to a Group,

allowing you to send the same text or picture message to up to 25

Contacts entries at one time.

ࡗ

About Contacts (page 47)

Displaying Contacts Details (page 48)

Adding a New Contacts Entry (page 48)

Editing a Contacts Entry (page 48)

Creating a Group (page 49)

If the Parental Controls feature is on and Voice Calls or Text

Messaging is restricted, you cannot add, edit, or delete

Contacts entries. (See page 39.)

Note

Displaying Contacts Entries

Editing Groups (page 49)

Finding Contacts Entries (page 50)

Using Contacts Information in Other Applications

(page 50)

Assigning Speed Dial Numbers (page 51)

Selecting a Ringer Type for an Entry (page 51)

Assigning a Picture to an Entry (page 52)

Secret Contacts Entries (page 52)

My Name Card (page 53)

1. From standby mode, press CONTACTS (right softkey).

2. Highlight a name to show that entry’s main phone number,

or highlight a group to show how many members it has.

ࡗ

Viewing History From Contacts

You can view the history of a selected Contacts entry from the

Contacts list.

ᮣ

Highlight an entry and press OPTIONS (right softkey) >

Contact History.

After you have saved the number, the new Contacts entry is

displayed.

Displaying Contacts Details

ICE – In Case of Emergency

Tip

1. From the Contacts list, highlight an entry and press

To make it easier for emergency personnel to identify

important contacts, you can list your local emergency

contacts under “ICE” in your phone’s Contacts list. For

example, if your mother is your primary emergency contact,

list her as “ICE–Mom” in your Contacts list. To list more

than one emergency contact, use “ICE1–___,” “ICE2–

___,” etc.

2. Highlight any data field and press

. Menu options for that

field will appear, if applicable.

If you select a group in step 1, entries or phone numbers

belonging to the group are displayed.

Note

Adding a New Contacts Entry

Editing a Contacts Entry

1. From standby mode, press CONTACTS (right softkey) > 

Add New... > New Contact.

1. From the Contacts list, highlight the entry you want to edit

and press OPTIONS (right softkey) > Edit Contact.

2. Enter a name for the new entry and press the navigation key

down.

2. Select the field you wish to edit, and then add or edit the

information and press

3. Enter the phone number for the entry and press

4. Highlight a number type for the entry (Mobile, Home, Work,

Pager, Fax, or Other) and press

3. Press DONE (left softkey).

5. Add other information (email address, URL, street address,

etc.).

6. Press DONE (left softkey).

Creating a Group

Editing Groups

You can create a group by assigning Contacts entries as members

and then naming the new group.

1. From the Contacts list, highlight the group you want to edit.

2. Press OPTIONS (right softkey) > Edit Group.

1. From standby mode, press CONTACTS (right softkey) > 

Add New... > New Group.

3. Change the group name or the group icon and press

4. Press SAVE (left softkey).

2. Read the message and press START (left softkey).

Adding Members to a Group

3. Highlight an entry you want to add to a group and press

A check mark will appear in the box next to the selected

entry.

1. From the Contacts list, highlight the group to which you want

to add members.

4. When you have selected all the entries you want to add,

press CONTINUE (left softkey).

2. Press OPTIONS (right softkey) > Edit Group > 

Add More.

Press OPTIONS (right softkey) > Enter New Address or

Recent History to enter a new phone number or address or

to select an entry from your history.

Tip

3. Read the message and press START (left softkey).

4. Highlight an entry you want to add and press

5. Repeat step 4 to add additional members.

5. Enter a name for the new group and press

Ⅲ To change the input text mode, press TEXT MODE... (right

softkey) with the group name field highlighted.

6. Press CONTINUE (left softkey) > SAVE (left softkey).

6. Press SAVE (left softkey).

– or –

Removing Members From a Group

Enter the first few letters of an entry’s name. Contacts with

matching letters are listed. (The more letters you enter, the

more your search narrows.)

1. From the Contacts list, highlight the group from which you

want to remove members.

2. Press OPTIONS (right softkey) > Edit Group.

3. To display an entry, highlight it and press

3. Highlight a member and press OPTIONS (right softkey) >

Remove from Group > YES (left softkey).

Ⅲ Press the navigation key left or right to display other listed

entries.

4. Repeat step 3 to remove additional members.

4. To dial the entry, highlight the phone number and press

5. Press SAVE (left softkey).

You can also find a group the same way as above. Press

MENU/OK to display the members of the group.

Tip

Deleting a Contacts Entry or Group

1. From the Contacts list, highlight an entry or a group you

Using Contacts Information in Other

Applications

want to delete.

2. Press OPTIONS (right softkey) > Delete Contact or 

Delete Group.

You can use saved Contacts information in other applications.

3. Press DELETE (left softkey) or YES (left softkey).

To copy information into a message:

1. From the Contacts list, highlight an entry and press

Finding Contacts Entries

2. Highlight the information you want to copy, such as phone

numbers, email addresses, URLs, or street addresses, and

1. From standby mode, press CONTACTS (right softkey).

press

2. Scroll through all the entries.

Messaging (SMS)” on page 86.

3. Select Share.

To assign a speed dial number to an existing phone number:

1. From the Contacts list, highlight an entry and press

4. Select Text Message.

After you select one or more recipients, the text entry screen for

the type of message specified will open, and the selected text will

appear in the body of the message.

2. Highlight a number and press OPTIONS (right softkey) > 

Set Speed Dial.

3. Highlight an available speed dial location and press

For more information about messaging, see “Text

Note

To replace a current assignment, select a location and

press REPLACE (left softkey).

Tip

To check speed dial assignments:

Assigning Speed Dial Numbers

ᮣ

From the Contacts list, press OPTIONS (right softkey) >

Settings > Speed Numbers.

Your phone can store up to 98 phone numbers in speed dial

locations. (See “Speed Dialing” on page 20.)

Selecting a Ringer Type for an Entry

To assign a speed dial number to a new phone number:

1. Add a phone number to a new or to an existing Contacts

Assign a ringer type to a Contacts entry so that you can identify

the caller by the ringer type. (See “Ringer Types” on page 30.)

entry. (See “Adding a New Contacts Entry” on page 48.)

2. Highlight the phone number and press OPTIONS (right

softkey) > Set Speed Dial.

1. From the Contacts list, highlight an entry and press

2. Select Set Ringers.

3. Highlight an available speed dial location and press

3. Select Incoming Calls, Text Message, or Picture Messaging.

4. Press

to return to the Contacts menu.

4. Select Change.

“Downloading Content” on page 97.

5. Highlight a ringer category and press

6. Highlight a ringer and press

Secret Contacts Entries

When you make an entry secret and hide it, that entry is not

displayed in your Contacts. In History, a telephone number is

displayed but the Contacts entry’s name is not.

If you select Downloaded > Get New in step 5, you can

purchase and download new ringers right from your phone.

For details, see “Getting New Ringers” on page 31 and

Tip

To make an entry secret:

ᮣ

From the Contacts list, highlight an entry and press 

OPTIONS (right softkey) > Set as Secret > On.

Assigning a Picture to an Entry

To hide or show secret entries:

Assign a picture to display each time a certain contact calls you.

1. From the Contacts list, press OPTIONS (right softkey) >

Settings > Hide Secret or Show Secret.

1. From the Contacts list, highlight an entry and press

2. Highlight the icon and press

3. Select Choose Photo.

2. Enter the four-digit lock code, and then press CONTINUE (left

softkey).

If you can’t recall your lock code, try using the last four

digits of your wireless phone number or check your lock

code hint. (See “Changing the Lock Code” on page 39.) If

this doesn’t work, contact your service provider.

Tip

4. Select a photo category, and then select an image.

5. Confirm the image on the preview screen, and then 

press

My Name Card

In My Name Card, you can edit your contact information to display

when you need, as well as send or exchange it via Bluetooth.

To display your name card:

ᮣ

From standby mode, press CONTACTS (right softkey) >

OPTIONS (right softkey) > Settings > My Name Card.

To edit your name card:

1. From the My Name Card screen, press OPTIONS (right

softkey) > Edit.

2. Highlight each field you want to edit and press

3. Edit the information. When finished, press DONE (left

softkey).

To send or exchange your name card via Bluetooth:

1. Make the Bluetooth connection with the other device. 

(See section 2H, “Bluetooth,” on page 76.)

2. From the My Name Card screen, select OPTIONS (right

softkey) > Send Name Card or Exchange Name Cards.

3. Highlight a device and press

Countdown Timer (page 58)

3. Enter a description and press

4. Select a category for the event (Appointment, Meeting, etc.)

by highlighting the category field and pressing

5. Select a priority for the event by highlighting the priority field

and pressing

6. Select a start and end time for the event by highlighting the

time field and pressing

2E. Calendar and Tools

ࡗ

Calendar (page 54)

Alarm (page 57)

Calculator (page 58)

World Clock (page 58)

Stopwatch (page 59)

7. Enter a location for the event by selecting the location field

and pressing EDIT (left softkey). Press

when you have

finished.

8. Select a ringer type for the alarm by highlighting the ringer

field and pressing

Calendar

Ⅲ To download ringers, select Downloaded > Get New.

9. Select an alarm time by highlighting the alarm time field and

pressing

Adding an Event to the Calendar

10. Select a repeat status for the alarm by highlighting the

repeat field and pressing

Ⅲ If you chose Specific Period, set a start and end date for

the repeat and press

Your Calendar helps organize your time and reminds you of up to

100 important events.

1. Press

> Calendar.

2. Highlight a day to which you would like to add a schedule

event and press OPTIONS (right softkey) > Add Schedule.

Ⅲ If you chose Weekly, select the check box for each day of

week you wish to set and press DONE (left softkey).

11. Press SAVE (left softkey).

7. Select a time and date for the item by highlighting the time

and date field and pressing

To change the calendar display views, press the left softkey

repeatedly to toggle between MONTHLY and WEEKLY

Tip

8. Select a status for the item by highlighting the status 

views.

field and pressing

to Needs Action.

. When you add an item, set it 

On the weekly view, press the navigation key up or down to

display the previous week or the next week, respectively.

9. Press SAVE (left softkey).

Press OPTIONS (right softkey) > Settings > 

Holiday/Weekday to enter holidays and weekdays.

To Do List items cannot be set to recur.

Note

Calendar Alerts

Adding a To Do List Item to the Calendar

Your phone can store and manage up to 40 To Do list items.

If you have scheduled events on the Calendar, your phone alerts

you by a ringing or vibrating alarm and displays a summary of the

scheduled events.

1. Press

> Calendar.

To respond to the alarm:

2. Highlight a day to which you would like to add a To Do list

item and press OPTIONS (right softkey).

ᮣ

Press SNOOZE (left softkey) to stop the alarm and start

snooze mode.

3. Press the navigation key right and select Add To Do.

– or –

4. Enter a description and press

5. Select a category for the item (Appointment, Meeting, etc.)

by highlighting the category field and pressing

6. Select a priority for the item by highlighting the priority field

and pressing

Press DISMISS (right softkey) to clear the alarm.

– or –

On the notification screen, the description you have entered

for that event is displayed. If certain information (such as an

email address, street address, phone number, or URL) is

highlighted in the description, press

related option menus. (See page 25.)

to display the

Deleting Events

1. Press

> Calendar.

Ⅲ If the description includes multiple items of information as

described above, press the navigation key up or down to

highlight a specific item.

2. Highlight the day from which you would like to delete an

event and press

To change the alarm settings, press

OPTIONS (right softkey) > Settings > Alarm to set the

> Calendar >

– or –

Tip

Press OPTIONS (right softkey) > Schedule List or To Do List.

ringer length and snooze options.

3. Highlight an event and press OPTIONS (right softkey) >

Delete.

Viewing Events

4. Highlight an option and press

Ⅲ This to delete the highlighted event.

Days with scheduled events are indicated by small colored

rectangles just below the date. A rectangle’s color depends

on the repeat status for an event.

Tip

Ⅲ Select to delete multiple events.

1. Press

> Calendar.

Ⅲ All on This List to delete all events on the list.

Ⅲ Completed To Do to delete completed To Do List items.

2. Highlight the day for which you would like to view events and

press

. The day’s event list is displayed.

5. Press YES (left softkey).

– or –

To delete old or all events:

Press OPTIONS (right softkey) > Schedule List or To Do List.

ᮣ

Press

> Calendar > OPTIONS (right softkey) > 

3. Highlight an event and press

displayed. You can edit the event on this screen.

. The event’s details are

Delete Memory > Delete Old or Delete All > YES 

(left softkey).

8. Select a volume level for the alarm by highlighting the

volume field and pressing

Alarm

9. Select a ringer length for the alarm by highlighting the ringer

length field and pressing

Your phone comes with a built-in alarm that has multiple alarm

capabilities.

10. Select a snooze interval minutes for the alarm by highlighting

the snooze interval field and pressing

1. Press

2. Highlight an alarm number and press

3. Enter a description for the alarm by highlighting the

description field and pressing

4. Select a time for the alarm by highlighting the time field and

pressing

5. Select a repeat status for the alarm by highlighting the

repeat field and pressing

6. Turn the alarm on or off by highlighting the alarm field and

pressing

Ⅲ Highlight On or Off and press

> Tools > Alarm.

11. Select a snooze time for the alarm by highlighting the snooze

time field and pressing

12. Press SAVE (left softkey).

Press ON or OFF (left softkey) to toggle the alarm on 

and off.

Tip

In steps 4 and 9, use your keypad or navigation key (up or

down to change value, left or right to move underscore) to

set the alarm time.

See “To respond to the alarm:” on page 55 for various ways of

responding to the alarm.

7. Select a ringer option for the alarm between Downloaded,

Preloaded Ringers, and No Ringer by highlighting the ringer

field and pressing

Ⅲ If you select Downloaded or Preloaded Ringers, highlight a

ringer type and press

Calculator

Countdown Timer

Your phone comes with a built-in calculator.

This feature allows you to use your phone as a countdown timer

to alert you when a specified period of time has elapsed. You can

set up to five timers.

1. Press

> Tools > Calculator.

2. Enter numbers using your keypad.

Ⅲ Press the appropriate key for an arithmetic option

1. Press

2. Highlight a countdown timer number and press

3. Highlight a setting and press

> Tools > Countdown.

(

Ⅲ Press the left softkey to enter a decimal point.

Ⅲ Description to enter a description of the countdown.

Ⅲ Press the right softkey to clear all numbers.

Ⅲ Time to enter the length of the countdown with four digits.

(For example, to set the timer to 20 minutes, enter “0020”

using your keypad.)

3. Press

for the total.

World Clock

Ⅲ Alarm to set the countdown alarm to on or off.

4. Press SAVE (left softkey).

To view the time in different locations:

1. Press > Tools > World Clock.

Press ON or OFF (left softkey) to toggle the countdown

Tip

alarm on and off.

2. Press the navigation key left or right to scroll through

different time zones.

Press SETTINGS (right softkey) to set ringer length and

snooze options.

Press SUMMER (left softkey) or STANDARD (right softkey)

to change between daylight saving and standard time.

Note

See “To respond to the alarm:” on page 55 for various ways of

responding to the alarm.

Stopwatch

1. Press

> Tools > Stopwatch.

2. Press MODE (left softkey) to select split timing or lap timing.

3. Press START (right softkey) to start the stopwatch.

4. Press SPLIT or LAP (left softkey) to record the time.

5. Press STOP (right softkey) to stop timing.

6. Press RESET (left softkey) to reset the stopwatch to zero.

Automatic Speech Recognition (ASR) (page 60)

Available ASR commands include:

ⅷ Call <Name or #> to call an entry in your Contacts list or a

spoken phone number. (See “Making a Voice Call Using ASR”

below for details.)

2F. Voice Services

ⅷ Send Text <Name or #> to send a text message to an entry in

your Contacts list or to a spoken phone number. (See page 61

for details.)

ࡗ

Managing Voice Services (page 63)

ⅷ Lookup <Name> to display the detail screen of an entry in your

Contacts list. (See page 61 for details.)

Automatic Speech Recognition (ASR)

ⅷ Go To <Menu> to jump directly to menu items or applications.

(See page 61 for details.)

You can use your phone’s built-in automatic speech recognition

(ASR) software to dial a phone number or to launch phone

functions. All you have to do is to talk into the phone, and ASR will

recognize your voice and complete tasks by itself.

ⅷ Check <Item> to check your phone’s status. (See page 62 for

details.)

Use ASR in a quiet environment so it can accurately

recognize your commands.

Tip

Activating ASR

During ASR operation, press HELP (left softkey) to get

instructions for using the software.

ᮣ

Press and hold

The screen displays “Say a command” and the phone prompts

you to say the name of the command you want to use. To

complete your task, simply follow the voice prompts.

Making a Voice Call Using ASR

1. Press and hold

2. When you hear “Say a command,” say “Call.”

3. When you hear “Say the name or number,” say a name or a

Displaying a Contacts Entry’s Information

Using ASR

phone number.

4. When you hear “Which location?,” say a number type (for

example, “Mobile”).

1. Press and hold

2. When you hear “Say a command,” say “Lookup.”

You can skip steps 3 and 4 by saying a name and location

after “Call” without pausing (for example, “Call John Jones

mobile”).

Tip

3. When you hear “Say the name,” say a Contact entry’s name.

The phone displays the detail screen for that Contacts entry.

If ASR does not recognize the name or number, it will find

the most likely matches and display a list of up to three

names or numbers. You will hear “Did you say Call…”

followed by the name or number. You can confirm by saying

“Yes.” Say “No” to change the selection.

Note

Opening Menus Using ASR

You can jump directly to many menu items or applications by

saying “Go to” followed by a menu option.

1. Press and hold

Sending a Text Message Using ASR

2. When you hear “Say a command,” say “Go To.”

1. Press and hold

3. When you hear “Which shortcut?,” say an application name

(for example, “Messages”).

2. When you hear “Say a command,” say “Send Text.”

4. The phone opens the selected menu.

3. When you hear “Say the name or number,” say a name or a

phone number.

Say “More options” to display additional application

Tip

names.

4. When you hear “Which location?,” say a number type (for

example, “Mobile”). The phone displays the text entry

screen. (See page 87 for how to compose a message.)

Ⅲ Always Confirm to always ask for confirmation.

Checking Phone Status Using ASR

You can use ASR to obtain information about your phone.

Ⅲ Never Confirm to never ask for confirmation.

To adapt the system to your voice:

1. Press and hold

2. When you hear “Say a command,” say “Check.”

2. Press SETTINGS (right softkey) > Adaptation > Adapt Voice.

3. When you hear “Which status item?,” say a command.

Ⅲ Status (all of the following except My Phone Number)

Ⅲ Time

3. Press START (left softkey) and repeat each word, phrase, or

telephone number you hear.

To reset the adaptation:

Ⅲ Signal Strength

Ⅲ Network

1. Press and hold

Ⅲ Battery

2. Press SETTINGS (right softkey) > Adaptation > Reset Voice >

YES (left softkey).

Ⅲ My Phone Number

To change the ASR mode:

ASR Settings

1. Press and hold

2. Press SETTINGS (right softkey) > Audio Modes.

3. Highlight an option and press

To change ASR confirmation:

1. Press and hold

2. Press SETTINGS (right softkey) > Confirmation.

3. Highlight an option and press

Ⅲ Automatic to ask for confirmation only when the system is

not sure what you said.

Ⅲ Expert Mode to sound a beep only.

Ⅲ Prompt Mode to prompt for required information.

Ⅲ Readout Mode to prompt for required information and to

read the text displayed on the main screen.

To change the ASR dialing region:

1. Press and hold or

2. Press SETTINGS (right softkey) > Dialing Region.

3. Highlight an option and press

Recording Memos

To record an audio memo:

1. Press

Record.

> Tools > Voice Services > Voice Memo >

Ⅲ North America to recognize only numbers valid in North

America.

2. Start recording after the beep.

To stop recording:

Ⅲ Other to recognize any number regardless of location.

ᮣ

Press

, or STOP (left softkey).

To display the ASR software version:

To record a call memo:

1. Press and hold

1. During a call, press OPTIONS (right softkey) > Voice Memo.

2. Start recording after the beep.

2. Press SETTINGS (right softkey) > About.

Managing Voice Services

To stop recording:

ᮣ

Press

, or STOP (left softkey). (Recording will also

Use your phone’s Voice Services to record audio memos to

remind you of important events, phone numbers, or grocery list

items, and to record call memos of the other party’s voice during

a phone call.

stop when the other party disconnects.)

You can store up to 1900 memos on your phone. Each

memo can be up to three minutes long.

Note

3. Highlight an option and press

Ⅲ Edit Title to edit the title of a memo.

Playing Recorded Memos

1. Press

> Tools > Voice Services > Voice Memo > List.

Ⅲ Properties to display information about a memo.

2. Highlight the memo you want to play and press

Ⅲ Type Filter to list memos by the type order as audio memo,

call memo, or all memos.

– or –

Press OPTIONS (right softkey) > Play > All to play all memos

continuously.

Ⅲ Sort by to sort memos by the recorded time, file name or

size in ascending or descending order.

To play multiple memos:

Deleting Recorded Memos

1. Press

> Tools > Voice Services > Voice Memo > List.

1. Press

> Tools > Voice Services > Voice Memo > List.

2. Press OPTIONS (right softkey) > Play > Multiple and select

memos you want to play.

2. Highlight the memo you want to delete and press OPTIONS

(right softkey) > Delete > This or All > YES (left softkey).

3. Press PLAY (left softkey).

To delete multiple memos:

Press SLOW (left softkey) or FAST (right softkey) to change

the playing speed. Press the navigation key left or right to

play the previous or next memo.

Note

1. Press

> Tools > Voice Services > Voice Memo > List.

2. Press OPTIONS (right softkey) > Delete > Multiple and select

memos you want to delete.

Managing Recorded Memos

3. Press DELETE (left softkey) > YES (left softkey).

1. Press

> Tools > Voice Services > Voice Memo > List.

2. Highlight a memo and press OPTIONS (right softkey).

Taking Pictures (page 65)

To activate camera mode, you can also press

Photos > Camera.

Tip

2G. Camera

2. Using the phone’s main screen as a viewfinder, aim the

camera lens at your subject.

3. Press

, CAPTURE (left softkey), or the side camera

ࡗ

Storing Pictures (page 69)

Sending Pictures (page 71)

Viewing Picture Messages (page 73)

Managing Pictures (page 74)

button until the shutter sounds. The picture will automatically

be saved in the In Phone folder. (See “Storing Pictures” on

page 69.)

Ⅲ To return to camera mode to take another picture, press

, or the side camera button.

4. Press OPTIONS (right softkey) for more options.

Ⅲ Take Picture to return to camera mode to take another

Taking Pictures

picture.

Taking pictures with your phone’s built-in camera is as simple as

choosing a subject, pointing the lens, and pressing a button.

Ⅲ Send Media to send your picture in a message. (See

“Sending Pictures From the In Phone Folder” on page 72.)

Ⅲ Print to print the picture using a Bluetooth-enabled printer.

1. To activate camera mode, press and hold

or the camera

button located on the left side of your phone. (Additional

camera options are available. See “Camera Mode Options”

on page 66 for more information.)

Ⅲ Upload to upload the picture to the picture messaging

website (www.plspictures.com). (See “Uploading Pictures”

on page 74.)

If the Parental Controls feature is on and the Camera is

restricted, you cannot activate camera mode. (See page 39.)

Ⅲ Review Media to go to the In Phone folder to review your

saved pictures.

Note

1. Take a picture. (See steps 1–3 on page 65.)

Ⅲ Set as to assign the picture. (See “Assigning Pictures”

below.)

Camera Mode Options

Press OPTIONS (right softkey) in camera mode to display

additional camera options:

Ⅲ Delete to delete the picture you just took.

Ⅲ Details/Edit to edit your picture or display details relating to

your pictures.

ⅷ Picture Mode to select a picture mode from Normal, 

Beach/Snow, Scenery, Mirror Image, or Night/Dark.

Assigning Pictures

ⅷ Zoom to zoom in and out on a subject. (See “Zoom” on

page 68.)

Assign a picture as a screen saver or as a picture ID.

ⅷ Self-Timer to activate the camera’s timer. (See “Self-timer” on

page 67.)

2. With the picture displayed, press OPTIONS (right softkey) >

Set as and select an option.

ⅷ Fun Tools to select an option from the following:

Ⅲ Multiple Shots to take multiple shots. (See “Multiple Shots”

on page 67.)

Ⅲ Picture ID to assign the picture to one or all of Contacts

entries as well as to unsaved phone numbers, or to private

and unknown phone numbers. See “Selecting a Picture ID”

on page 28.

Ⅲ Fun Frames to select your favorite fun picture frame to

decorate your picture.

You cannot use Fun Frames feature when resolution is set

to 1.3M. (See “Camera Settings” on page 68.)

Note

Ⅲ Screensaver to assign the picture as a screen saver. Press

to assign the picture.

You can also assign pictures from the My Albums menu.

See “In Phone Folder Options” on page 69 or “Managing

Online Pictures From Your Phone” on page 74.

Ⅲ Color Tone to select from a wide variety of color tones for

the picture.

Tip

ⅷ Image Controls to select an option from Brightness, 

White Balance, Sharpness, or Contrast.

You can view pictures assigned as picture IDs or screen

savers by pressing MENU/OK > Tools > Assigned Media.

settings. (See “Saving Your Settings” on page 68.)

ⅷ CameraSettings to select Resolution, Quality, and other

settings. (See “Camera Settings” on page 68.)

Multiple Shots

This feature allows you to take three, six, or nine shots in a

continuous sequence. When you take multiple shots,

displayed in the viewfinder.

ⅷ Review Media to go to the In Phone folder to review your saved

pictures.

will be

ⅷ Key Guidance to show keypad shortcuts in camera mode.

1. From camera mode, press OPTIONS (right softkey) > 

Fun Tools > Multiple Shots.

ⅷ User Settings to provide convenient access to your favorite

When taking multiple shots, the resolution is temporarily

set to Low-240x320.

Note

Self-timer

1. From camera mode, press OPTIONS (right softkey) > 

Self-Timer.

2. Highlight an option (3 Shots, 6 Shots, or 9 Shots) and press

2. Highlight a delay time (10 Seconds or 5 Seconds) and press

3. Highlight the duration of the interval between shots (Normal

or Fast) and press

3. Press

the timer. (You will see

phone will beep during the countdown.)

or START (left softkey) when you are ready to start

4. Press

, CAPTURE (left softkey), or the side camera

at the top of the screen and your

button to take the pictures. (The MULTIPLE SHOTS folder will

display up to nine miniature thumbnail pictures per screen.)

4. Get ready for the picture. (When the timer is down to three

seconds, the self-timer icon will turn red and the beep sound

will change.)

To cancel the self-timer after it has started:

ᮣ

Press CANCEL (right softkey) or

Zoom

Saving Your Settings

This feature allows you to zoom in on an object when you take a

picture. You can adjust the zoom from 1x to 12x.

You can save your favorite camera mode options as your

preferred settings.

1. From camera mode, press the navigation key right to zoom

in or left to zoom out.

1. Set your favorite camera mode options and press OPTIONS

(right softkey) > User Settings.

2. Press

, CAPTURE (left softkey), or the side camera

2. Highlight an unassigned number and press

> YES (left

button to take a picture.

softkey). (The Default keeps the original settings.)

3. Enter a title and press

Camera Settings

4. Confirm the settings and press

1. From camera mode, press OPTIONS (right softkey) >

CameraSettings.

To retrieve your settings:

2. Highlight an option and press

Ⅲ Resolution to select a picture’s file size 

(1.3M-960x1280, Med-480x640, or Low-240x320).

1. From camera mode, press OPTIONS (right softkey) > 

User Settings.

2. Highlight a customized settings group and press

YES (left softkey).

> 

Ⅲ Quality to select the picture quality setting (Fine, Normal, or

Economy).

To replace settings, highlight a customized settings group

and press OPTIONS (right softkey) > Overwrite > YES (left

softkey).

Note

Ⅲ Shutter Sound to select a shutter sound (Default, 

“Say Cheese,” “Ready,” or Off).

Ⅲ Status Bar to display or hide status indicators and softkeys.

These can be displayed or hidden by pressing the

navigation key up or down.

Ⅲ Save Setting to select Auto or Manual saving of pictures.

Pictures From the In Phone Folder” on page 72.)

Camera Icons

Storing Pictures

Function

Icon

Details

Beach/Snow

Use this setting in bright light.

Your phone’s picture storage area is called My Albums. There are

two types of folders in My Albums:

Scenery

Mirror Image

Night/Dark

Sunny

Use this setting for scenery at a distance.

Use this setting to take a mirror image.

Use this setting in low light.

Picture

Mode

ⅷ In Phone (see “In Phone Folder” below)

ⅷ Online Albums (see page 74)

Use this setting for sunny weather.

Use this setting for cloudy weather.

Use this setting for incandescent lighting.

Use this setting for fluorescent lighting.

In Phone Folder

Cloudy

White

Balance

Tungsten

Fluorescent

Manual

Your phone’s internal storage area is called the In Phone folder.

From the In Phone folder, you can view all the pictures you have

stored there, send items to the picture messaging website

(www.plspictures.com), delete files, and access additional

options.

To set the white balance manually.

To set brightness manually.

Brightness

Sharpness

Contrast

Manual

To set sharpness manually.

To set contrast manually.

To review your stored pictures in the In Phone folder:

Manual

For 1.3-megapixel picture resolution.

For medium picture resolution.

For low picture resolution.

ᮣ

Press

> My Albums > In Phone.

1.3M

Medium

Low

Resolution

In Phone Folder Options

Numeric countdown will appear when the

self-timer has been started.

When you are viewing the In Phone folder, press OPTIONS (right

softkey) to display the following options:

Self-Timer

Multiple Shots

Use this setting for multiple shots.

ⅷ Send Media to send your picture in a message. (See “Sending

Messaging Account” on page 71.

ⅷ Upload to upload pictures from the In Phone folder to the

picture messaging website (www.plspictures.com).

(Depending on your settings, the system may prompt you to

accept a Web connection.) Choose from the following options:

ⅷ Delete to delete pictures. Select This, Selected, or All.

Deleting pictures will free up memory space in your phone

to enable you to take more pictures. Once deleted, you

cannot upload pictures to your online picture messaging

account.

Note

Ⅲ This to upload the item currently highlighted.

Ⅲ Selected to upload the selected item(s). Press

select an item. (The box on the lower right corner will be

checked.)

ⅷ Details/Edit to edit or display details relating to your pictures.

Ⅲ Text Caption to edit the selected picture’s caption.

Ⅲ Special Effects to select from Fun Frames, Color Tone, 

Fun Stamps, or Rotate.

Ⅲ All to upload all items in the In Phone folder.

If this is the first time you have accessed picture

messaging, the system will prompt you to register your

picture messaging account. See “Registering Your Picture

Note

Ⅲ Resize to resize the selected picture. Select Med-480x640

or Low-240x320.

Ⅲ Trimming to crop the selected picture.

Ⅲ Picture Info to display information such as the picture’s

caption, time/date, and size.

ⅷ Print to print items using a Bluetooth-enabled printer.

ⅷ Set as to select from these options:

Ⅲ Full Screen to display the selected picture in full screen

view.

Ⅲ Picture ID to assign the currently highlighted picture to one

or all of Contacts entries as well as to unsaved phone

numbers, or to private and unknown phone numbers. See

“Selecting a Picture ID” on page 28.

ⅷ Slideshow to view your pictures in slideshow mode (only

available when you save two or more pictures to the folder).

ⅷ Album List to display the album list.

Ⅲ Screensaver to assign the currently highlighted picture as a

ⅷ Camera Mode to activate camera mode.

screen saver. Press

to assign the picture.

“Assigning Pictures” on page 66.)

password through your phone. This password will also allow you

to sign in to the picture messaging website at

www.plspictures.com to access and manage your uploaded

pictures and albums.

Reviewing Pictures in Assigned Media

Folder

The Assigned Media folder automatically stores copies of pictures

assigned as a picture ID or as a screen saver on your phone. (See

1. Press

> My Albums > Online Albums. (Follow the

prompts to register your picture messaging account.)

1. Press

> Tools > Assigned Media.

If your service plan does not include picture messaging,

you will first be prompted to subscribe to the service for an

additional monthly charge.

Note

2. Use your navigation key to view and scroll through the

pictures. Press the left softkey to switch the view between

EXPAND and THUMBNAIL display.

2. Enter a password for your picture messaging account and

press . (You will be prompted to confirm your password.)

Sending Pictures

3. Please wait while the system creates your account.

Once you have taken a picture, you can use the messaging

capabilities of your phone to instantly share it with family and

friends. You can send pictures to up to 25 people at a time using

their email addresses or their phone numbers.

Write down your picture messaging password in a secure

place.

Tip

Once you have received confirmation that your account has been

successfully registered, you may upload and share pictures and

access the picture messaging website.

Registering Your Picture Messaging

Account

The first time you use any of the picture management options

involving the picture messaging website, follow the prompts to

6. If you wish to include an audio message, scroll to the Audio

field, and then press RECORD (right softkey) > to

record. (Maximum recording time is 10 seconds. If you close

the phone, the recording will stop and the data recorded

until then will be attached.)

Sending Pictures From the In Phone Folder

1. Press

> My Albums > In Phone.

2. Highlight a picture to send and press

. (You can select

multiple pictures by highlighting each in turn and pressing

to check the picture’s box.)

7. To set the priority, scroll to the Priority field, and then select

High, Normal, or Low.

3. Press OPTIONS (right softkey) > Send Media.

8. Confirm the recipients, message, audio memo, and pictures.

(You may also select additional options by pressing the right

softkey. Follow the onscreen instructions to add available

options.)

4. Select the recipient from the list or from the following

options.

Ⅲ Go to Contacts to select a recipient from your Contacts.

(Qualifying Contacts entries must contain a wireless phone

number or an email address.)

9. Press SEND (left softkey) to send the pictures.

Ⅲ MULTIPLE (left softkey) to select multiple recipients. Press

CONTINUE (left softkey) when you have finished selecting

recipients. (You may include up to 25 recipients per

message.)

Sending Pictures From the Messages Menu

You can also send picture messaging from your phone’s

Messages menu.

Ⅲ NEW ADDRESS (right softkey) to enter a recipient’s wireless

phone number or email address directly. Press CONTINUE

(left softkey) to proceed.

1. Press

> Messages > Send Message > Picture Messaging.

2. Select the recipient from the list or from the following

options.

5. If you wish to include a text message, scroll to the Text field,

and then enter your message.

Ⅲ Go to Contacts to select a recipient from your Contacts.

(Qualifying Contacts entries must contain a wireless phone

number or an email address.)

Ⅲ MULTIPLE (left softkey) to select multiple recipients. Press

CONTINUE (left softkey) when you have finished selecting

recipients. (You may include up to 25 recipients per

message.)

8. Press SEND (left softkey) to send the pictures.

Viewing Picture Messages

Ⅲ NEW ADDRESS (right softkey) to enter a recipient’s wireless

phone number or email address directly. Press CONTINUE

(left softkey) to proceed.

ᮣ

When you receive a picture message, a notification will

automatically be displayed on your phone’s screen. Use your

softkeys to view picture messages.

3. Select a picture from In Phone or Online Albums and press

> NEXT (left softkey). (You can also choose to take a

new picture.)

– or –

1. Press

> Photos or Messages > Picture Messaging.

4. If you wish to include a text message, scroll to the Text field,

2. Select Inbox.

and then enter your message.

3. Highlight a message and press

message options, press OPTIONS [right softkey].)

. (To display the

5. If you wish to include an audio message, scroll to the Audio

field, and then press RECORD (right softkey) >

To reply to picture messages:

record. (Maximum recording time is 10 seconds. If you close

the phone, the recording will stop and the data recorded

until then will be attached.)

1. While the message is displayed, press OPTIONS (right

softkey) > Reply with > Text Message.

6. To set the priority, scroll to the Priority field, and then select

High, Normal, or Low.

2. Compose a message and press SEND (left softkey).

– or –

7. Confirm the recipients, message, audio memo, and pictures.

(You may also select additional options by pressing the right

softkey. Follow the onscreen instructions to add available

options.)

1. Press

> Photos or Messages > Picture Messaging.

2. Select Inbox.

3. Highlight a message to which you want to reply and press

Uploading Pictures

OPTIONS (right softkey) > Reply with > Text Message.

1. Press

> My Albums > In Phone.

4. Compose a message and press SEND (left softkey).

2. Select the check box for each picture you wish to upload and

press OPTIONS (right softkey) > Upload.

Managing Pictures

3. Select Selected or All.

4. Select “Uploads”Area or Other Albums.

Picture Messaging Website

Managing Online Pictures From Your Phone

Use your phone to manage, edit, or share pictures you have

uploaded to the picture messaging website.

Once you have uploaded pictures to your online picture

messaging account (see “Uploading Pictures” on this page), you

can use your computer to manage your pictures. From the picture

messaging website, you can share pictures, edit album titles, add

captions, and organize images.

1. Press

> My Albums > Online Albums. The Uploads

folder and your albums are displayed.

You will also have access to picture management tools to improve

and customize your pictures. You’ll be able to lighten, darken,

crop, add antique effects, add comic bubbles and cartoon effects,

and use other features to transform your pictures.

2. Highlight Uploads or an available album title and press

Miniature thumbnail pictures, up to nine per screen, are

displayed.

To access the picture messaging website:

To expand a selected picture from miniature thumbnail to

full-screen, press EXPAND (left softkey).

Tip

1. From your computer, go to www.plspictures.com.

2. Enter your phone number and picture messaging password

to register. (See “Registering Your Picture Messaging

Account” on page 71.)

3. Highlight a picture and press OPTIONS (right softkey) to

Managing Online Albums

display your online picture options.

1. Press

> My Albums > Online Albums.

Ⅲ Send Media to send your picture.

2. Highlight an album (or the Uploads folder) and press

OPTIONS (right softkey).

Ⅲ Set as to assign the picture.

Ⅲ Save to Phone to download the pictures to the In Phone

folder.

3. Highlight an option and press

Ⅲ Edit/Delete to select an option from the following:

Ⅲ Delete to delete pictures/videos saved in the current album

(or the Uploads folder).

●

Delete Album to delete the selected album.

Ⅲ Copy/Move to copy or move pictures/videos to a selected

album.

Rename Album to rename the selected album.

Album Info to display detailed information about the

album.

Ⅲ Details/Edit to edit or display details relating to your

pictures/videos.

Ⅲ Create Album to create a new album. Enter a new album

name and press > SAVE (left softkey).

Ⅲ Media Filter to filter only pictures, only videos, or to display

all media files.

The Uploads folder cannot be deleted or renamed.

Note

Ⅲ Album List to display the album list.

About Bluetooth (page 76)

Turning Bluetooth On and Off

2H. Bluetooth

By default, your phone’s Bluetooth feature is turned off. Turning

Bluetooth on enables your phone’s Bluetooth functions.

1. Press

> Bluetooth > On/Off.

ࡗ

2. Press ON (left softkey) to enable Bluetooth. Press OFF (left

softkey) to disable Bluetooth.

Turning Bluetooth On and Off (page 76)

Making Your Phone Discoverable (page 76)

Bluetooth Menu (page 77)

Pairing Bluetooth Devices (page 78)

Viewing the Trusted Devices List (page 78)

Sending Data via Bluetooth (page 79)

Printing Pictures via Bluetooth (page 80)

Making Your Phone Discoverable

To make your phone discoverable (allowing other Bluetooth

devices to detect it), you must set your phone’s visibility to other

than Hidden.

1. Press

> Bluetooth > Visibility.

The first time you access the Visibility menu, you will be

advised to enable Bluetooth by pressing ON (left softkey).

On the next screen, you can customize the device name by

overwriting it and pressing SAVE (left softkey).

Note

About Bluetooth

Bluetooth is a short-range communications technology that

allows you to connect wirelessly to a number of Bluetooth

devices, such as headsets and hands-free car kits, and

Bluetooth-enabled handhelds, computers, printers, and wireless

phones. The Bluetooth communication range is usually up to

approximately 30 feet.

2. Select Visible for 3 min or Always visible. If you select

Always visible, your phone will be discoverable by all 

in-range Bluetooth devices until you change the setting. 

If you select Visible for 3 min, your phone will return to

hidden mode after three minutes.

ᮣ

Press

> Bluetooth to select from the following options.

Bluetooth Status Indicators

Ⅲ On/Off to turn Bluetooth functions on or off. When On is

selected, your phone can receive requests from other Bluetooth

devices. (See page 76.)

The following icons show your Bluetooth connection status at a

glance:

– Bluetooth feature is on.

Ⅲ Visibility to set your phone’s visibility (or “discoverability”)

– Your phone is visible to other Bluetooth devices.

– Your phone is connected to a Bluetooth device.

for other Bluetooth devices.

Ⅲ Add New to add a new Bluetooth device.

●

You can choose the device you wish to add to the

Trusted Devices list (see page 78). You must first put

the desired device into visible (or “discoverable”) mode.

If asked for a PIN code, you must enter the same PIN

code as the desired device. (See “Pairing Bluetooth

Devices” on page 78.)

The above icons will blink while your phone is communicating

with a Bluetooth device.

Bluetooth Menu

Ⅲ Trusted Devices to display a list of your trusted Bluetooth

devices. Select Add New and follow steps 2-4 in “Pairing

Bluetooth Devices” to add a new Bluetooth device. Up to 20

devices can be listed. (See page 78.)

The Bluetooth menu allows you to set up many of the

characteristics of your phone’s Bluetooth service, including:

ⅷ Setting your phone’s visibility (or “discoverability”) for other

Bluetooth devices.

Ⅲ My Bluetooth Info to display the name, address, class, and

supported profiles of your phone. You can edit the

Bluetooth name (device name) of your phone that will

appear on other in-range Bluetooth devices, depending on

your visibility settings.

ⅷ Adding a new Bluetooth device to your phone.

ⅷ Displaying your Bluetooth trusted devices list.

ⅷ Displaying your phone’s Bluetooth information.

Pairing Bluetooth Devices

Viewing the Trusted Devices List

The Bluetooth pairing process allows you to establish trusted

connections between your phone and another Bluetooth device.

When devices are paired, a passkey (PIN) is shared between

devices, allowing for fast, secure connections while bypassing the

discovery and authentication process.

This list displays a list of devices which are paired with your

device and set as trusted devices.

ᮣ

From the Bluetooth menu, select Trusted Devices.

Trusted Devices List Menu

Once you have created trusted devices, several options are

available from the Trusted Devices list.

1. From the Bluetooth menu, select Add New. (See “Bluetooth

Menu” on page 77.)

2. Highlight the device you wish to pair with and press

Left Softkey Menus

3. Enter the passkey of your device or the other’s and 

ᮣ

From the Trusted Devices list, highlight a device, and press

the left soft key menu item which appears depending on the

type of device highlighted.

press

4. (Optional) Edit the device name and press SAVE (left softkey).

Due to different specifications and features of other

Bluetooth compatible devices, display and operations may

be different, and functions such as transfer or exchange

may not be possible.

Note

Ⅲ CONNECT to connect to the selected Bluetooth device, if

not connected (for headsets, hands-free and other devices,

excluding computers, PDAs, phones, or printers).

Ⅲ TRANSFER... to send data saved on your phone to the

selected Bluetooth device (for computers, PDAs, or

phones). (See page 79.)

Ⅲ PRINT to print data using the selected Bluetooth-enabled

printer. (See page 80.)

Ⅲ ON to allow other Bluetooth devices to initiate a connection

without any confirmation.

Options Menu

ᮣ

From the Trusted Devices list, highlight a device and press

Ⅲ OFF to display a confirmation screen from which you can

accept or deny a connection.

OPTIONS (right softkey) to display the following options.

Ⅲ Add New to add a new Bluetooth device. See the

description for Add New item on “Bluetooth Menu” on

page 77.

Sending Data via Bluetooth

Ⅲ Delete to delete the selected device from the list.

You can send Contacts data and Name Cards to or exchange

Name Cards with another Bluetooth device, such as a computer,

PDA, or phone.

Ⅲ Delete All to delete all devices from the list.

Ⅲ Auto-Accept to configure your phone’s accessibility to other

Bluetooth devices. (See “Setting Auto-Accept” below.)

Sending Contacts

Ⅲ View/Edit Info to view or edit the information of the

selected device.

1. From the Bluetooth menu, select Trusted Devices, and

select a device (computer, PDA, or phone) from the list.

Ⅲ Help to display the Trusted Devices list help.

2. Press TRANSFER... (left softkey) > Send Contacts.

Setting Auto-Accept

3. Select an option:

Ⅲ Send All Contacts to send all the entries in your Contacts.

You can configure your phone’s accessibility to other Bluetooth

devices.

Ⅲ Select Contacts to send selected entries. After you have

selected entries by checking the box next to each entry,

press CONTINUE (left softkey).

1. From the Trusted Devices list, highlight a device and press

OPTIONS (right softkey) > Auto-Accept.

2. A message will appear asking whether to turn Auto-Accept

on or off. Press ON or OFF (left softkey).

4. Read the message and press SEND (left softkey).

4. To set the print settings, highlight each element and select a

Sending or Exchanging Name Cards

setting using your navigation key right or left.

(For more information about Name Cards, please see page 53.)

Ⅲ Type: You can select the print mode from Prints or Index.

1. From the Bluetooth menu, select Trusted Devices, and

select a device (computer, PDA, or phone) from the list.

Ⅲ Copies: You can set the number of copies from Single,

Doubles, or Manual. When you select Manual, set the

number (up to 99 per picture) by pressing your navigation

key right or left. The number of copies will be displayed in

the field below.

2. Press TRANSFER... (left softkey) > Send Name Card or

Exchange Name Cards.

3. Press SEND (left softkey).

Ⅲ Below the Copies element, you can view the miniature

thumbnails of the selected picture(s) in step 3 and the

number of copies you have selected in the Copies element

(if other than the Index print mode is selected). To confirm

the selected pictures, highlight the thumbnail field and

press the navigation key right or left.

Printing Pictures via Bluetooth

You can print out your pictures stored on your phone. (Some

Bluetooth-enabled printers may not support this feature.)

Ⅲ Size: You can set the print size from 4"x6", 5"x7", or

Letter. (Print sizes may vary according to the type of printer

you have.)

1. From the Bluetooth menu, select Trusted Devices, and

select a printer from the list.

2. Press PRINT (left softkey).

Ⅲ Date: You can imprint the date on your pictures. Select On or

Off. (Date stamping may not be available depending on the type

of printer you have.)

3. Select the check box for each picture you wish to print and

press CONTINUE (left softkey).

Ⅲ Border: You can choose whether to print the pictures with

or without border. Select On or Off.

You may not be able to print pictures that you cannot

display on your phone.

Note

Ⅲ Caption: You can choose whether to print the pictures with

or without text captions such as the date captured (if

available) and serial numbers. Select On or Off.

5. When you have finished selecting the print settings, press

PRINT (left softkey), and wait for the Bluetooth connection

and printing.

6. When printing is finished, press

, and then press

Before using the Bluetooth printing feature, make sure your

phone’s battery is fully charged.

Note

Text Messaging (SMS) (page 86)

Section 3

Wireless Service

1. From standby mode, press and hold

2. Follow the system prompts to:

Ⅲ Create your passcode.

3A. Wireless Service:

The Basics

Ⅲ Record your name announcement.

Ⅲ Record your greeting.

ࡗ

Voicemail (page 84)

Caller ID (page 90)

Call Waiting (page 90)

Making a 3-Way Call (page 90)

Call Forwarding (page 91)

Roaming (page 91)

Voicemail Passcode

Note

It is strongly recommended that you create a passcode

when setting up your voicemail to protect against

unauthorized access. Without a passcode, anyone who has

access to your handset is able to access your voicemail

messages.

If the Parental Controls feature is on and Voice Calls are

restricted, you cannot call voicemail unless you have

established your own number as an allowed Contacts entry.

(See page 39.)

Voicemail

Voicemail Notification

Setting Up Your Voicemail

There are several ways your phone alerts you to a new message:

ⅷ By displaying a message on the screen.

Your phone automatically transfers all unanswered calls to your

voicemail, even if your phone is in use or turned off. You should

set up your voicemail and personal greeting as soon as your

phone is activated.

ⅷ By sounding the assigned ringer type.

ⅷ By displaying

at the top of the screen.

Using One-Touch Message Access

New Voicemail Message Alerts

ᮣ

Press and hold

box.)

. (Your phone will dial your voicemail

When you receive a new voicemail, your phone alerts you and

prompts you to call your voicemail.

To call your voicemail from the notification screen:

Using the Menu Keys on Your Phone to Access Your

Messages

ᮣ

Press

1. Press

2. Press

Note

> Messages > Voicemail.

When you are roaming off the home network, you may not

receive notification of new voicemail messages. It is

recommended that you periodically check your voicemail by

dialing 1 + area code + your wireless phone number. When

your voicemail answers, press (*) and enter your passcode.

You may be charged roaming rates when you access

voicemail while roaming off the home network.

Note

to listen to your messages.

You are charged for airtime minutes when you are

accessing your voicemail from your wireless phone.

Using Another Phone to Access Messages

1. Dial your wireless phone number.

Your phone accepts messages even when it is turned off,

but you can receive voicemail message alerts only when

your phone is turned on and you are in a wireless service

area.

2. When your voicemail answers, press the star key (*).

3. Enter your passcode.

Retrieving Your Voicemail Messages

When you call into voicemail, you first hear the header

information (date, time, and sender information) for the

message. To skip directly to the message, press 4 during

the header.

Tip

You can review your messages directly from your wireless phone

or from any other touch-tone phone. To dial from your wireless

phone, either speed dial your voicemail (use one-touch message

access) or use the menu keys.

Clearing the Message Icon

Normally, the message icon will go away after you have called

your voicemail and listened to your message(s). You can also clear

the message icon manually without calling in to your voicemail.

Text Messaging (SMS)

With text messaging (SMS), you can send and receive text

messages between your phone and another messaging-ready

phone. When you receive a new message, it will automatically

display on your phone’s screen.

ᮣ

Press

> Messages > Voicemail > Reset Indicator >

YES (left softkey).

In addition, text messaging includes a variety of preset messages,

such as “The meeting has been cancelled,” that make composing

messages fast and easy. Use your phone to customize your own

preset messages (up to 50 characters).

Voicemail Key Guide

Here’s a quick guide to your keypad functions while listening to

voicemail messages.

Text messages can be composed of up to six segments of 160

characters each, for a total of 960 characters per text message.

The current segment and total segment count is displayed at the

top of each segment. For example, (5/6) at the top of a segment

would indicate you are viewing segment five of a six-segment

message.



Date/Time

Replay

Erase

Send Reply

Rewind

Advance



Forward

See your service plan for applicable charges for text

messaging.

Note



Return Call

Help

Save



Cancel

Skip

Composing Text Messages

Accessing Text Messages

1. Press

> Messages > Send Message > Text Message.

To read a text message:

2. Select a recipient from the list or from the following options.

ᮣ

When you receive a text message, your phone will display a

notification message. Use your navigation key to scroll down

and view the entire message.

Ⅲ Go to Contacts to select a recipient from your Contacts.

(Qualifying Contacts entries must contain a phone number

or an email address.)

To reply to a text message:

Ⅲ MULTIPLE (left softkey) to select multiple recipients. Press

CONTINUE (left softkey) when you have finished selecting

recipients. (You may include up to 25 recipients per

message.)

1. While the message is displayed, press REPLY (left softkey).

2. Compose a reply and press SEND (left softkey).

Ⅲ NEW ADDRESS (right softkey) to enter a recipient’s phone

number or email address directly. Press CONTINUE (left

softkey) to proceed.

3. Compose a message.

Ⅲ Press OPTIONS (right softkey) to select additional options.

4. Review your message and press SEND (left softkey).

If the Parental Controls feature is on and Text Messaging is

restricted, text messaging may be disabled; or text

messages may only be sent to allowed recipients. (See

page 39.)

Note

Viewing Messages

Threaded Messaging

Highlight a thread and press

and received from a particular number, in reverse chronological

order. Failed, pending, and draft messages are also listed.

to display the messages sent to

Threaded messaging lets you follow a chain of text messages to

and from a particular contact.

To display the thread list:

Highlight a message to see details for that message.

ᮣ

Press

> Messages > Text Messages.

Entry’s name, phone

You will see a thread list. Each thread has an entry’s name (if

saved in Contacts), a phone number, or an email address. You will

also see the number of unread messages, if any, for each thread.

number, or email address.

Message you received.

Me – Message you sent.

When you highlight a thread, you will see the first few words of

the most recent message in that thread.

You may see one of the following headings:

ⅷ Me (Failed) – Message you did not send successfully.

ⅷ Me (Pending) – Message you have not sent yet because your

phone has no network connection. The message will be sent

automatically when your phone reconnects to the network.

ⅷ Me (Draft) – Message you saved as a draft. Only one draft can

be saved in each thread, and that draft appears at the top of

the thread.

Ⅲ Unlock to unlock the selected message.

Message Details

Text messages are automatically deleted starting with the

oldest. To save messages, lock them.

Note

Highlight a message and press

details and view the entire message.

to display the message

You can select certain information from a text message or email

message and automatically save it or use it in a related

application. See “Simple Data Exchange” on page 25.

Ⅲ Delete to delete the selected message.

Ⅲ Delete All to delete all messages.

Ⅲ Call to dial the phone number appearing in the selected

message.

Threaded Messaging Options

Ⅲ Go/Open Browser to open the URL appearing in the

selected message.

When you are viewing a messaging thread list, a message thread,

or a message details screen, you can choose from among the

following options. (Options will vary according to screen.)

Ⅲ Open to dial the phone number or to open the URL

appearing in the selected message.

ⅷ Press

to make a call to the entry.

Ⅲ Save Number to save the phone number appearing in the

selected message.

ⅷ Press SEND MESSAGE (left softkey) to send a message to the

entry.

Ⅲ Save Email to save the email address appearing in the

selected message.

ⅷ Press REPLY (left softkey) to reply to a message.

ⅷ Press SEND (left softkey) to send a draft message.

ⅷ Press RESEND (left softkey) to resend a failed message.

Ⅲ Settings to display the Messaging Settings menu.

ⅷ Select a message, press OPTIONS (right softkey), and select an

option.

Ⅲ Forward to forward the selected message.

Ⅲ Lock to lock the selected message.

To switch back to the first caller:

Caller ID

ᮣ

Press

again.

Caller ID allows people to identify a caller before answering the

phone by displaying the number of the incoming call. If you do not

want your number displayed when you make a call, follow these

steps.

For those calls where you don’t want to be interrupted, you

can temporarily disable Call Waiting by pressing * 7 0

before placing your call. Call Waiting is automatically

reactivated once you end the call.

Tip

1. Press

2. Enter the number you want to call.

3. Press

Making a 3-Way Call

With 3-Way Calling, you can talk to two people at the same time.

When using this feature, the normal airtime rates will be charged

for each of the two calls.

To permanently block your number, contact your service provider.

Call Waiting

1. Enter a number and press

2. Once you have established the connection, press

. 

When you are on a call, Call Waiting alerts you to incoming calls

by sounding two beeps. Your phone’s screen informs you that

another call is coming in and displays the caller’s phone number

(if available).

(This puts the first caller on hold.)

3. Select Contacts, Recent History, or Enter Phone#.

4. Select a number from your Contacts or Recent History, or

enter a number directly, and then press

To respond to an incoming call while you’re on a call:

5. When you’re connected to the second party, press

again or JOIN (right softkey) to begin your 3-way call.

ᮣ

Press

second call.)

. (This puts the first caller on hold and answers the

If one of the people you called hangs up during your call, you and

the remaining caller stay connected. If you initiated the call and

are the first to hang up, all callers are disconnected.

Roaming

Roaming Icon

Call Forwarding

Your phone’s display screen always lets you know when you’re off

the home network. Anytime you are roaming, the phone displays

the roaming icon (

Call Forwarding lets you forward all your incoming calls to another

phone number – even when your phone is turned off. You can

continue to make calls from your phone when you have activated

Call Forwarding.

Remember, when you are using your phone off the home

network, always dial numbers using 11 digits (1 + area

code + number).

Tip

To activate Call Forwarding:

Roaming on Other Networks

1. Press

When you’re roaming on other networks, your call quality and

security will be similar to the quality you receive when making

calls on the home network. However, you may not be able to

access certain features, such as Web services, depending on the

available network.

2. Enter the area code and phone number to which you want

your calls forwarded.

3. Press

. (You will hear a tone to confirm the activation of

Call Forwarding.)

To deactivate Call Forwarding:

If you’re on a call when you leave the home network, your

call is dropped. If your call is dropped in an area where you

think wireless service is available, turn your phone off and

on again to reconnect to the network.

Note

1. Press

2. Press

. (You will hear a tone to confirm the deactivation.)

You are charged a higher rate for calls you have forwarded.

Note

2. Select an option:

Checking for Voicemail Messages While Roaming

Ⅲ Home Only to access only the home network and prevent

roaming on other networks.

When you are roaming off the home network, you may not receive

on-phone notification of new voicemail messages. Callers can still

leave messages, but you will need to periodically check your

voicemail for new messages if you are in a roaming service area

for an extended period of time.

Ⅲ Automatic to seek service on the home network. When

network service is unavailable, the phone searches for an

alternate service.

1. Dial 1 + area code + your phone number.

Call Guard

2. When you hear your voicemail greeting, press

Your phone has two ways of alerting you when you are roaming

off the home network: the onscreen roaming icon and Call Guard.

Call Guard makes it easy to manage your roaming by requiring an

extra step before you can place or answer a roaming call. (This

additional step is not required when you make or receive calls

while on the home network.)

3. Enter your passcode at the prompt and follow the voice

prompts.

When you return to the home network, voicemail notification will

resume as normal.

Setting Roam Mode

To turn Call Guard on or off:

Your phone allows you to control your roaming capabilities. By

using the Roaming menu option, you can determine which signals

your phone accepts.

1. Press

2. Select On or Off.

Call Guard is turned on by default on your phone.

> Settings > Others > Roaming > Call Guard.

Note

Choose from two different settings on your phone to control your

roaming experience.

Voice dialing and speed dialing are not available when you

are roaming with Call Guard enabled.

1. Press

> Settings > Others > Roaming > Set Mode.

To place roaming calls with Call Guard on:

Data Roam Guard

1. From standby mode, dial 1 + area code + the seven-digit

Depending on service availability and roaming agreements, your

phone may be able to access Web services while roaming on

certain other networks. You can set your phone to alert you when

you are roaming off the home network and try to use Web

services such as messaging.

number and press

2. Read the message and press

To answer incoming roaming calls with Call Guard on:

1. Press

2. Read the message and press

To set your Data Roam Guard notification:

1. Press

> Settings > Others > Roaming > 

Data Roam Guard.

If the Call Guard feature is set to On, you need to take extra

steps to make and receive roaming calls.

Note

2. Select On or Off.

Ⅲ On (default mode) turns your phone’s Data Roam Guard

feature on. You will see a prompt that will require you to

respond anytime you access Web services while roaming.

Ⅲ Off turns your phone’s Data Roam Guard feature off. Your

phone will not notify you of your roaming status when you

access Web services.

To use Web services when Data Roam Guard is active:

ᮣ

When a notification appears informing you that data roam

charges may apply, press ROAM (left softkey) to connect.

Getting Started With Data Services (page 94)

When you use data services, your user name is submitted to

identify you to the home network. Your user name will be

automatically programmed into your phone. You don’t have to

enter it.

3B. Web and Data Services

Finding Your User Name

ࡗ

Accessing Messages (page 96)

Downloading Content (page 97)

Browser Menu (page 99)

If you are not sure what your user name is, you can easily find it

on your phone.

ᮣ

Press

> Settings > Phone Info > Phone#/User ID.

Launching a Web Connection

ᮣ

Press

the home page.)

> Web. (Your Web connection starts and you see

Getting Started With Data Services

If Net Guard is enabled and displayed (see page 42), press

YES (left softkey) to continue and launch the Web.

Note

With your wireless phone and data services, you are ready to start

enjoying the advantages of data services. This section will help

you learn the basics of using your data services, including

managing your user name, launching a Web connection, and

navigating the Web with your phone.

If the Parental Controls feature is on and the Web is restricted,

you cannot launch a Web connection. (See page 39.)

While connecting, you may see an animation before the home

page appears.

Your User Name

To change the default launch page to the last page you

viewed, press TOOLBAR (right softkey) and select OPTIONS>

Advanced > Startup page > The last page I viewed >

DONE (left softkey).

Tip

When you buy your phone and sign up for service, you’re

automatically assigned a user name, which is typically based on

your 10-digit wireless phone number.

Softkeys

Data Connection Status and Indicators

During a data session, the bottom line of your phone’s display

screen contains one or more softkeys. These keys are shortcut

controls for navigating around the Web, and they correspond to

the softkeys directly below the phone’s display screen.

Your phone displays the current status of your data connection

through indicators at the top of the screen. The following symbols

are used:

You are connected to the 1xRTT data network. Data is

being transferred (for example, when you are opening a

Web page) and you cannot receive calls.

Depending on which websites you visit, the labels on the

softkeys may change to indicate their function.

Tip

To use softkeys:

Press a softkey. (If an additional pop-up menu is displayed

You are connected to the network but data is not currently

being transferred (for example, when you are viewing a Web

page that is completely open), and you can receive calls.

ᮣ

when you press the softkey, select the menu items using

your keypad [if they’re numbered], or by highlighting the

If you do not see an indicator, your phone does not have a current

data connection. To launch a connection, see “Launching a Web

Connection” on page 94.

option and pressing

Scrolling

Navigating the Web

Navigating through menus and websites during a data session is

easy once you’ve learned a few basics. Here are some tips for

getting around.

As with other parts of your phone’s menu, you’ll have to scroll up

and down to see everything on some websites.

To scroll line by line through websites:

ᮣ

Press the navigation key up or down.

Selecting

You can also use the BACK key for deleting text (like a

BACKSPACE key) when you are entering text.

Note

Once you’ve learned how to use softkeys and scroll, you can start

navigating the Web.

Going Home

To select onscreen items:

To return to the home page from any other page:

ᮣ

Use the navigation key to highlight an item, and then press

the left softkey (or press ).

ᮣ

Press and hold

– or –

You’ll find that the left softkey is used primarily for selecting

items. This softkey is often labeled “GO.”

Tip

Press TOOLBAR (right softkey) > MY HOMEPAGE.

If the items on a page are numbered, you can use your

keypad (number keys) to select an item.

Accessing Messages

Links, which are displayed as underlined text, allow you to jump

to Web pages, select special functions, or even place phone calls.

You can send and receive email messages or instant messages

right from your phone. Messaging allows you to stay connected

24 hours a day anywhere on the home network.

To select links:

ᮣ

Highlight the link and press the appropriate softkey.

Going Back

With data services, you can use popular email services such as

Yahoo!^®Mail to keep in touch, even while you’re on the go.

To go back one page:

1. From the home page, select Messaging > Email.

ᮣ

Press

on your phone.

2. Select an email provider.

3. Use your keypad to enter the required sign-in information for

the selected provider, such as user name, email address, or

password, and select Sign In. (Your mailbox for the selected

provider will be displayed.)

4. Follow the onscreen instructions to read, reply to, compose,

and send messages and manage your IM account.

Downloading Content

The information required to sign in will vary depending on

the email provider you are accessing.

Note

You have access to a dynamic variety of downloadable content,

such as Games, Screen Savers, and other applications.

(Additional charges may apply.) Follow the basic steps below to

access and download these items.

4. Follow the onscreen instructions to read, reply to, compose,

send, and manage your email account.

Instant Messaging

Data services also provide you with access to popular instant

messaging (IM) clients, including Yahoo!^®Messenger.

Accessing the Download Menus

1. Press

> My Stuff.

2. Select a download category (Games, Ringers, Screen Savers,

or Applications), and then select Get New. (The browser will

start and take you to the corresponding download menu.)

1. From the home page, select Messaging > 

Instant Messaging.

2. Highlight an IM provider.

To access the download menus from the Web browser:

3. Use your keypad to enter the required sign-in information for

the selected provider, such as user name or password, and

select Sign In. (You will see Your IM screen for the selected

provider.)

1. From the home page, select Downloads.

2. Select Games, Ringers, Screen Savers, or Applications to

go to the corresponding download menu. (For more

information on navigating the Web, see “Navigating the

Web” on page 95.)

The information required to sign in will vary depending on

the instant messaging provider you are accessing.

Note

To download a selected item:

Selecting an Item to Download

1. From the information page, select Buy. (The item will

download automatically. When you see the New Download

screen you have successfully downloaded the item to your

phone.)

You can search for available items to download in a number of

ways:

ⅷ Featured displays a selection of featured items.

ⅷ Categories allows you to narrow your search to a general

category, such as Country or Pop/Rock for Ringers or For the

Ladies for Screen Savers. (There may be several pages of

available content in a list. Select Next 9 to view additional

items.)

If you have not previously purchased an item, you will be

prompted to create your purchasing profile.

Note

2. Select an option to continue:

Ⅲ Select a menu such as Run/Open/Listen/View/Play to start

the downloaded item. Your data session will end, and your

phone will redirect you to the appropriate phone menu

screen.

ⅷ Search allows you to use your keypad to enter search criteria to

locate an item. You may enter an entire word or title or perform

a partial-word search.

Ⅲ Select Set as to assign a ringer or screen saver to a phone

function.

Downloading an Item

Once you’ve selected an item you wish to download, highlight it

Ⅲ Select Settings to configure downloaded games or

applications.

and press

, or press GO (left softkey). You will see a summary

page for the item including its title, the vendor, the download

details, the file size, and the cost. Links allow you to view the

License Info page, which outlines the price, license type, and

length of license for the download, and the Terms of Use page,

which details the Premium Services Terms of Use and your

responsibility for payment.

Ⅲ Select Shop to browse for other items to download.

Ⅲ Press

to quit the browser and return to standby mode.

ⅷ OPTIONS to display additional options:

Browser Menu

Ⅲ Set as Homepage to set the current page as your home

page.

Although the home page offers a broad and convenient array of

sites and services for you to browse, not all sites are represented,

and certain functions, such as going directly to specific websites,

are not available. For these and other functions, you will need to

use the browser menu. The browser menu offers additional

options to expand your use of the Web on your phone.

Ⅲ Font size to change the font size for the browser.

Ⅲ Send this page to... to send a Web address (URL) via text

messaging.

Ⅲ Clear private data to delete the browser’s cache, cookies,

etc.

Ⅲ Help to show more detailed information about using the

browser.

Opening the Browser Menu

You may open the browser menu anytime you have an active data

session, from any page you are viewing.

Ⅲ Advanced

●

Icon Row to display the icon row, the top area on the

screen that displays the status icons, time, battery

charge level, etc.

To open the browser menu:

ᮣ

Press TOOLBAR (right softkey). (You will see the browser

menu.)

●

Startup page to change the default launch page.

Options available under the browser menu include:

ⅷ MY HOMEPAGE to return the browser to the home page.

ⅷ MY PAGES to access and manage your favorites (bookmarks).

ⅷ WEB SEARCH to launch a Web search.

Page info to display information about the current

page.

●

Images on/off to display images on the Web page.

Reset browser to reset the browser to its default state.

Turn on/off error logging to set whether to save error

logs (text files useful for debugging browser errors).

Ⅲ View error log to display the error log.

●

Send referrer to send HTTP URL referrer information.

Creating a Favorite

Redirect prompt to display a prompt when your data is

being redirected.

Favorites (bookmarks) allow you to store the addresses of your

favorite websites for easy access at a later time.

●

Reset browser settings to reset all browser settings.

1. From the Web page you wish to add, press TOOLBAR (right

softkey) to open the browser menu.

About browser to display information about your

browser.

2. Select MY PAGES.

●

Java Scripting to enable or disable Java scripting.

3. Confirm that Add this page to favorites is highlighted and

Going to a Specific Website

press

4. Press ADD (left softkey).

Saving a page as a favorite does not store the page

To go to a particular website by entering a URL (Web

address):

Note

contents, just its address.

1. From any Web page, press the navigation key up to highlight

the address bar.

Some pages cannot be saved as favorites, depending on

how a particular page was created.

2. Use your keypad to enter the URL of the website you wish to

go to and press

Accessing a Favorite

Not all websites are viewable on your phone.

Note

1. Press TOOLBAR (right softkey) to open the browser menu.

2. Select MY PAGES.

3. Highlight a favorite and press

100

Deleting a Favorite

1. Press TOOLBAR (right softkey) to open the browser menu.

2. Select MY PAGES.

3. Highlight a favorite and press OPTIONS (right softkey).

4. Select Delete this Favorite. (A confirmation will be

displayed.)

5. Press REMOVE (left softkey) to remove the favorite.

Reloading a Web Page

ᮣ

Press

while the Refresh icon ( ) at the upper right

corner of the browser is highlighted.

General Precautions (page 104)

101

102

Section 4

Safety and Warranty Information

General Precautions

4A. Important Safety

Information

There are several simple guidelines to operating your phone properly and

maintaining safe, satisfactory service.

ⅷ

To maximize performance, do not touch the bottom portion of your

phone where the internal antenna is located while using the phone.

ⅷ

Speak directly into the mouthpiece.

Avoid exposing your phone and accessories to rain or liquid spills. If your

phone does get wet, immediately turn the power off and remove the

battery.

Do not expose your phone to direct sunlight for extended periods of time

(such as on the dashboard of a car).

Although your phone is quite sturdy, it is a complex piece of equipment

and can be broken. Avoid dropping, hitting, bending, or sitting on it.

Any changes or modifications to your phone not expressly approved in

this document could void your warranty for this equipment and void your

authority to operate this equipment.

ࡗ

Maintaining Safe Use of and Access to Your Phone

(page 105)

Using Your Phone With a Hearing Aid Device (page 106)

Caring for the Battery (page 107)

Radio Frequency (RF) Energy (page 108)

Owner’s Record (page 110)

ⅷ

ࡗ

User Guide Proprietary Notice (page 110)

For the best care of your phone, only authorized personnel should

service your phone and accessories. Failure to do so may be

dangerous and void your warranty.

Note

This phone guide contains important operational and safety

information that will help you safely use your phone. Failure to

read and follow the information provided in this phone guide may

result in serious bodily injury, death, or property damage.

104

systems are adequately shielded from external RF signals. Also check with

the manufacturer regarding any equipment that has been added to your

vehicle.

Maintaining Safe Use of and Access

to Your Phone

Consult the manufacturer of any personal medical devices, such as

pacemakers and hearing aids, to determine if they are adequately shielded

from external RF signals.

Do Not Rely on Your Phone for Emergency Calls

Mobile phones operate using radio signals, which cannot guarantee

connection in all conditions. Therefore you should never rely solely upon

any mobile phone for essential communication (e.g., medical

emergencies). Emergency calls may not be possible on all cellular networks

or when certain network services or mobile phone features are in use.

Check with your local service provider for details.

Always turn off the phone in healthcare facilities, and request

permission before using the phone near medical equipment.

Note

Turning Off Your Phone Before Flying

Turn off your phone before boarding any aircraft. To prevent possible

interference with aircraft systems, the U.S. Federal Aviation Administration

(FAA) regulations require you to have permission from a crew member to

use your phone while the plane is on the ground. To prevent any risk of

interference, FCC regulations prohibit using your phone while the plane is

in the air.

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone without a

hands-free device) is prohibited in some jurisdictions. Laws vary as to

specific restrictions. Remember that safety always comes first.

Following Safety Guidelines

Turning Off Your Phone in Dangerous Areas

To avoid interfering with blasting operations, turn your phone off when in a

blasting area or in other areas with signs indicating two-way radios should

be turned off. Construction crews often use remote-control RF devices to

set off explosives.

To operate your phone safely and efficiently, always follow any special

regulations in a given area. Turn your phone off in areas where use is

forbidden or when it may cause interference or danger.

Using Your Phone Near Other Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF)

signals. However, RF signals from wireless phones may affect inadequately

shielded electronic equipment.

Turn your phone off when you’re in any area that has a potentially explosive

atmosphere. Although it’s rare, your phone and accessories could generate

sparks. Sparks can cause an explosion or fire, resulting in bodily injury or

even death. These areas are often, but not always, clearly marked. They

include:

RF signals may affect improperly installed or inadequately shielded

electronic operating systems or entertainment systems in motor vehicles.

Check with the manufacturer or their representative to determine if these

Ⅲ Fueling areas such as gas stations.

105

Ⅲ Below deck on boats.

Ⅲ Fuel or chemical transfer or storage facilities.

means of measuring both wireless phone and hearing devices to determine

usability rating categories for both.

Ⅲ Areas where the air contains chemicals or particles such as grain,

Ratings have been developed for mobile phones to assist hearing device

users find phones that may be compatible with their hearing device. Not all

phones have been rated for compatibility with hearing devices. Phones that

have been rated have a label located on the box. Your Mirro^TMPLS-3810

has an M4 and a T4 rating.

dust, or metal powders.

Ⅲ Any other area where you would normally be advised to turn off your

vehicle’s engine.

Never transport or store flammable gas, flammable liquids, or

explosives in the compartment of your vehicle that contains your

phone or accessories.

Note

These ratings are not guarantees. Results will vary depending on the user’s

hearing device and individual type and degree of hearing loss. If a hearing

device is particularly vulnerable to interference noise; even a phone with a

higher rating may still cause unacceptable noise levels in the hearing

device. Trying out the phone with your hearing device is the best way to

evaluate it for your personal needs.

Restricting Children’s Access to Your Phone

Your phone is not a toy. Do not allow children to play with it as they could

hurt themselves and others, damage the phone or make calls that increase

your invoice.

M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing aid

compatibility and are likely to generate less interference to hearing devices

than unrated phones. (M4 is the better/higher of the two ratings.)

Using Your Phone With a Hearing Aid

Device

T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to

be more usable with a hearing device’s telecoil (“T Switch”or “Telephone

Switch”) than unrated phones. (T4 is the better/higher of the two ratings.

Note that not all hearing devices have telecoils in them.)

A number of wireless phones have been tested for hearing aid device

compatibility. When some wireless phones are used with certain hearing

devices (including hearing aids and cochlear implants), users may detect a

noise which can interfere with the effectiveness of the hearing device.

Hearing aid devices may also be measured for immunity to interference

noise from wireless phones and should have ratings similar to phones. Ask

your hearing healthcare professional for the rating of your hearing aid. Add

the rating of your hearing aid and your phone to determine probable

usability:

Some hearing devices are more immune than others to this interference

noise, and phones also vary in the amount of interference noise they may

generate. ANSI standard C63.19 was developed to provide a standardized

ⅷ

Any combined rating equal to or greater than six offers excellent use.

106

ⅷ

Any combined rating equal to five is considered normal use.

Any combined rating equal to four is considered usable.

Caring for the Battery

Thus, if you pair an M3 hearing aid with an M3 phone, you will have a

combined rating of six for “excellent use.” This is synonymous for T ratings.

Protecting Your Battery

The guidelines listed below help you get the most out of your battery’s

performance.

It is further suggested you experiment with multiple phones (even those not

labeled M3/T3 or M4/T4) while in the store to find the one that works best

with your hearing aid device. Should you experience interference or find the

quality of service unsatisfactory after purchasing your phone, promptly

return it to the store where purchased for exchange or refund. More

information about hearing aid compatibility may be found at: www.fcc.gov,

www.fda.gov, and www.accesswireless.org.

ⅷ

Recently there have been some public reports of wireless phone

batteries overheating, catching fire or exploding. It appears that many, if

not all, of these reports involve counterfeit or inexpensive, aftermarket-

brand batteries with unknown or questionable manufacturing standards.

The manufacturer is not aware of similar problems with manufacturer

phones resulting from the proper use of batteries and accessories

approved by the manufacturer of your phone. Use only manufacturer-

approved batteries and accessories found through your phone’s

manufacturer. Buying the right batteries and accessories is the best way

to ensure they’re genuine and safe.

Getting the Best Hearing Device Experience

With Your Phone

ⅷ

Do not disassemble or open crush, bend or deform, puncture or shred

the battery.

Do not modify or remanufacture, attempt to insert foreign objects into

the battery, immerse or expose to water or other liquids, expose to fire,

explosion or other hazard.

To further minimize interference:

ⅷ

Set the phone’s display and keypad backlight settings to ensure the

minimum time interval (see also page 28):

1. Press

> Settings > Display > Backlight > Backlight Dim or

ⅷ

Avoid dropping the phone or battery. If the phone or battery is dropped,

especially on a hard surface, and the user suspects damage, take it to a

service center for inspection.

Backlight Off.

2. Highlight the minimum time interval setting and press

ⅷ

Improper battery use may result in a fire, explosion or other hazard.

Do not short circuit a battery or allow metallic conductive objects to

contact battery terminals.

ⅷ

Position the phone so the internal antenna is farthest from your 

hearing aid.

Move the phone around to find the point with least interference.

ⅷ

Keep the metal contacts on top of the battery clean.

Battery usage by children should be supervised.

107

Charging

Radio Frequency (RF) Energy

ⅷ

In order to avoid damage, charge the battery only in temperatures that

range from 32° F to 113° F (0° C to 45° C).

Understanding How Your Phone Operates

Don’t use the battery charger in direct sunlight or in high humidity areas,

such as the bathroom.

The battery may need recharging if it has not been used for a long

period of time.

It’s best to replace the battery when it no longer provides acceptable

performance. It can be recharged hundreds of times before it needs

replacing.

Your phone is basically a radio transmitter and receiver. When it’s turned

on, it receives and transmits radio frequency (RF) signals. When you use

your phone, the system handling your call controls the power level. This

power can range from 0.006 watt to 0.2 watt in digital mode.

Knowing Radio Frequency Safety

The design of your phone complies with updated NCRP standards

described below.

Storing

In 1991–92, the Institute of Electrical and Electronics Engineers (IEEE) and

the American National Standards Institute (ANSI) joined in updating ANSI’s

1982 standard for safety levels with respect to human exposure to RF

signals. More than 120 scientists, engineers and physicians from

ⅷ

Don’t store the battery in high temperature areas for long periods of

time. It’s best to follow these storage rules:

Less than one month:

-4° F to 140° F (-20° C to 60° C)

universities, government health agencies and industries developed this

updated standard after reviewing the available body of research. In 1993,

the Federal Communications Commission (FCC) adopted this updated

standard in a regulation. In August 1996, the FCC adopted hybrid standard

consisting of the existing ANSI/IEEE standard and the guidelines published

by the National Council of Radiation Protection and Measurements (NCRP).

More than one month:

-4° F to 113° F (-20° C to 45° C)

Disposal of Lithium Ion (Li-Ion) Batteries

ⅷ

Promptly dispose of used batteries in accordance with local regulations.

Never dispose of the battery by incineration.

Do not handle a damaged or leaking Li-Ion battery as you can be

burned.

For safe disposal options of your Li-Ion batteries, contact your nearest

authorized service center.

Body-Worn Operation

To maintain compliance with FCC RF exposure guidelines, if you wear a

handset on your body, use the supplied or approved carrying case, holster

or other body-worn accessory. If you do not use a body-worn accessory,

ensure the antenna is at least 0.866 inches (2.2 centimeters) from your

body when transmitting. Use of non-approved accessories may violate 

FCC RF exposure guidelines. Other accessories used with this device for

ⅷ

Special Note: Be sure to dispose of your battery properly. In some areas,

the disposal of batteries in household or business trash may be prohibited.

108

body-worn operations must not contain any metallic components and must

provide at least 0.866 inches (2.2 centimeters) separation distance

including the antenna and the user’s body.

The highest reported SAR values of the Mirro^TMPLS-3810are:

Cellular CDMA mode (Part 22):

Head: 0.32 W/kg; Body-worn: 0.46 W/kg

For more information about RF exposure, visit the FCC website at

www.fcc.gov.

PCS mode (Part 24):

Head: 0.87 W/kg; Body-worn: 0.38 W/kg

Specific Absorption Rates (SAR) for Wireless

Phones

FCC Radio Frequency Emission

This phone meets the FCC Radio Frequency Emission Guidelines.

The SAR is a value that corresponds to the relative amount of RF energy

absorbed in the head of a user of a wireless handset.

FCC ID number: V65SCP-3810.

More information on the phone’s SAR can be found from the following FCC

website: http://www.fcc.gov/oet/ea/.

The SAR value of a phone is the result of an extensive testing, measuring

and calculation process. It does not represent how much RF the phone

emits. All phone models are tested at their highest value in strict laboratory

settings. But when in operation, the SAR of a phone can be substantially

less than the level reported to the FCC. This is because of a variety of

factors including its proximity to a base station antenna, phone design and

other factors. What is important to remember is that each phone meets

strict federal guidelines. Variations in SARs do not represent a variation in

safety.

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

All phones must meet the federal standard, which incorporates a

substantial margin of safety. As stated above, variations in SAR values

between different model phones do not mean variations in safety. SAR

values at or below the federal standard of 1.6 W/kg are considered safe for

use by the public.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules.

Note

109

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications.

Owner’s Record

The model number, regulatory number, and serial number are located on a

nameplate inside the battery compartment. Record the serial number in the

space provided below. This will be helpful if you need to contact us about

your phone in the future.

However, there is no guarantee that interference will not occur in a

particular installation.

Model: Mirro^TMPLS-3810

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

Serial No.:

User Guide Proprietary Notice

ⅷ

Reorient the direction of the internal antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

T9 Text Input is licensed by Nuance Communications, Inc. and is covered

by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and

other patents pending.

ⅷ

Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Notice

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

The term “IC” before the radio certification number only signifies that the

Industry Canada technical specifications were met.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003

du Canada.

110