DVD-E360K
DVD-E360
DVD-E350
DVD Player
User Manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
ENGLISH
Disc Markings
Note
Description
Front Panel Controls
-
Discs which cannot be played with this player.
•
•
•
DVD-ROM
CD-ROM
CDI
• DVD-RAM
• CDV
~
Play Region Number
• CVD
PAL broadcast system in U.K,
France, Germany, etc.
PAL
7
-
Ability to play back may depend on recording
conditions.
DVD-E360K
▼
•
•
•
DVD-R, +R
CD-RW
DVD+RW, -RW (V mode)
▼
▼
▼
▼
▼
▼
Dolby Digital disc
Stereo disc
STEREO
-
The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
DIGITAL
SOUND
Digital Audio disc
MP3 disc
DVD-E360
COPY PROTECTION
▼
▼
▼
▼
▼
▼
Many DVD discs are encoded with copy protec-
tion. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results a distorted picture
from copy-protected DVD discs.
Region Number
Both the DVD player and the discs are coded by
region. These regional codes must match in order
for the disc to play. If the codes do not match, the
disc will not play.
This item incorporates copy protection technol-
ogy that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are pro-
hibited.
DVD-E350
The Region Number for this player is described
on the rear panel of the player.
▼
▼
▼
▼
▼
DivX Certification
CLASS 1 LASER PRODUCT
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Coorporation or its sub-
sidiaries and are used under license.
ABOUT DIVX VIDEO : DivX® is a digital video
format created by DivX, LLC, a subsidiary of
Rovi Corporation.
This is an official DivX Certified® device that
information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND : This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information
on how to complete your registration.
“DivX Certified to play DivX video, including
premium content.”
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
1. DISC TRAY
Place the disc here.
2. DISPLAY
Operation indicators are displayed here.
3. OPEN/CLOSE ( )
Press to open and close the disc tray.
4. PLAY/PAUSE (
Play or pause the disc.
5. POWER ON/OFF (
6. USB HOST
(Only DVD-E360K,E360)
Connect digital still camera, MP3 player,
memory stick, Card reader other remo-
vable storage devices.
CAUTION :
7. MIC (Only DVD-E360K)
Connect Microphone for karaoke func-
tions.
CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE TO
THE BEAM (IEC 60825-1).
)
)
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
Turn on/off and the player is turned on/
off.
Covered by one or more of the following U.S
patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
CLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
KLASSE 1
LUOKAN 1
KLASS 1
LASER APPARAT
LÁSER CLASE 1
PRODUCTO
3
Tour of the Remote Control
Connections
DVD-E350
DVD-E360
DVD-E360K
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
12
13
1
2
12
13
12
13
1
2
1
2
Before Connecting the DVD Player
3
14
15
14
15
23
15
3
3
22
5
6
7
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user’s manual of the additional components you are connecting for more information
on those particular components.
4
5
6
22
5
6
7
16
16
16
7
17
18
17
18
17
18
8
8
8
A. Connecting to a TV (For Video)
9
9
9
10
19
20
21
10
19
21
10
19
21
1. Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on
the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.
2. Turn on the DVD player and TV.
11
11
11
3. Press the input selector on your TV remote control until the Video signal from the DVD player
appears on the TV screen.
Note
-
-
-
Noise may be generated if the audio cable is too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection page.
The position of terminals can vary depending on your TV set. Please refer to the user’s manual of the
TV.
1. DVD POWER Button
Turns the power on or off.
2. REPEAT Button
To open and close the disc tray.
13. VIDEO SEL. Button
Changes video output mode.
14. USB Button
-
-
If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of
the DVD player.
If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (SCART-RGB ➝ SCART-CVBS).
Allows you to repeat play a title, chapter,
track, or disc.
(Only DVD-E360K,E360)
To change device which access to USB
device.
3. DISC MENU Button
Brings up the Disc menu.
4. RECORD Button
(Only DVD-E360K)
Use to Karaoke recording.
15. MARKER Button
16. PLAY Button (
B. Connection to an Audio System (2 Channel Amplifier, Dolby Digital,
MPEG2)
)
Begins disc play.
1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD
player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable, connect
the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO
IN (COAXIAL) terminal of the Amplifier.
2. Using the video signal cable(s), connect the VIDEO terminals on the rear of the DVD player to the
VIDEO terminals of your TV
3. Turn on the DVD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound from the
DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
5. SEARCH Buttons (
/
)
17. SUBTITLE/(π) Button
18. RETURN Button
Returns to a previous menu
19. TITLE MENU Button (®)
Brings up the Title menu.
20. KARAOKE (†) Button
(Only DVD-E360K)
To acces karaoke menu (keycon, mic volume,
echo).
21. INFO Button
Used to displays playback info banner.
22. REPEAT A-B Button
(Only DVD-E360,E350)
Allows you to repeat A-B disc.
23. ZOOM Button
Allows you to search forward/backward
through a disc.
6. STOP Button (
To stop the disc
7. SKIP Buttons (
)
/
)
Use to skip the title, chapter or track.
8. MENU Button
Brings up the DVD player’s menu.
9. ENTER/π/†,√/® Buttons
This button functions as a toggle switch.
10. AUDIO Button (√)
Use this button to access various audio
functions on a disc.
C. Connecting to a TV (SCART)
1. Using Scart cable, connect to SCART terminal on the rear of the DVD player to the SCART IN
terminals of TV.
11. TOOLS Button
2. Turn on the DVD player and TV.
Displays the current disc mode. It also lets
you access the Display function.
12. OPEN/CLOSE ( ) Button
(Only DVD-E350)
Enlarges the DVD Picture.
3. Press the input selector on your TV remote control until the Video signal from the DVD player
appears on the TV screen.
4
Skipping Tracks
During play, press the SKIP (|k or K|) button.
- When playing a DVD, if you press the SKIP (K|) button, it moves to the next chapter. If you press the
WHITE
RED
SKIP (|k) button while play time <5s,it moves to previous chapter, but if you press SKIP (|k), while
play time >5s it moves to the beginning of the current chapter.
Coaxial kabel
Audio kabel
B
WHITE
WHITE
-When playing a CD, if you press the SKIP (K|) button while play time <5s,it moves to previous track,
but if you press SKIP (|k) while play time >5s it moves to the beginning of the current track.
RED
RED
YELLOW
Using the Display Function
Video kabel
A
When Playing a DVD/MPEG4
Audio kabel
Scart kabel
C
WHITE
RED
YELLOW
1. During play, press the TOOLS button on the remote control.
2. Press the π/† buttons to select the desired item.
3. Press the √/® buttons to make the desired setup.
4. To make the screen disappear, press the TOOLS button again.
The Tool Button Display functions are listed in the table below.
To access the desired title when there is more than one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Basic functions
Playing a Disc
Before Play
Most DVD discs are recorded in chapters (similar to tracks on an audio CD). Select this function to find
and play a specific chapter.
- Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
Allows playback of the film from a desired time. You must enter the starting time as a reference. The time
search function does not operate on some discs.
Lets you select the soundtrack language for a film. A DVD disc can have up to eight different soundtracks.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If
you want to select a language, press the π/† button, and then press the ENTER button. (This screen
will only appear when you plug in the player for the first time.)If the language for the startup screen is
not set, the set-tings may change whenever you turn the power on or off. Therefore, make sure that you
select the language you want to use.Once you select a menu language, you can change it by pressing
the ®|| button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your preferred language.
Lets you select the subtitle language or, if you prefer, turn off subtitles. A DVD disc can have up to 32 different
sets of subtitles, each in a different language.
E
Z
Lets you choose the EZ-View type
Select to activate the Zoom function.
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to the
next selection.
Some DVDs have scenes that have been recorded at multiple angles. Use the Angle function to view a
scene at one of those angles.
Searching through a Chapter or Track
During play, press the SEARCH (k or K) button on the remote control for more than 1 second.
Note
DVD
CD
2X, 4X, 8X, 16X, 32X
2X, 4X, 8X, 16X, 32X
-
The speed marked in this function may be different from the
actual playback speed.
-
No sound is hearing during search mode (Except CD).
5
Using the Disc and Title Menu
Advanced functions
During the playback of a DVD disc, press the DISC MENU/TITLE MENU button on the remote control.
Adjusting the Aspect Ratio (EZ View)
Note
To play back using aspect ratio (DVD)
-
-
-
Depending on a disc, the Disc Menu/Title Menu may not work.
You can also use the Disc Menu, using the DISC MENU button on the remote control.
Title Menu will only be displayed if there are at least two titles in the disc.
1. During play, press the TOOLS button on the remote control.
E
Z
2. Press the π/† buttons to select
icon. Each time you press the √/® buttons, the screen size
changes. For graphics of the screen sizes and lists of the sequences in which the sizes change,
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
see the next column.
3. Press the RETURN button to exit EZ View.
If you are using a 16:9 TV
When playing a DVD
If you are using a 4:3 TV
1. Press the REPEAT button on the remote control. Repeat screen appears.
2. Press the REPEAT or π/† button to change playback mode. DVD repeats play by chapter or title.
- Off.
For 16:9 aspect ratio discs
- WIDE SCREEN
- SCREEN FIT
For 16:9 aspect ratio discs
- 4:3 Letter Box
- 4:3 Pan Scan
- Title : repeats the title that is playing.
- Chapter : repeats the chapter that is playing.
- Repeat A-B
- ZOOM FIT
- SCREEN FIT
- ZOOM FIT
For 4:3 aspect ratio discs
- Normal Wide
- SCREEN FIT
- ZOOM FIT
- Vertical Fit
For 4:3 aspect ratio discs
- Normal Screen
- SCREEN FIT
Using the A-B Repeat function (DVD-E360K)
1. Press the REPEAT button on the remote control. The repeat screen appears.
2. Press the π/† button to select the REPEAT A-B and then press ENTER.
3. Press the ENTER at the point where you want repeat play to start (A).
4. Press the ENTER at the point where you want repeat play to start (B).
- ZOOM FIT
Note
This function may behave differently depending on the type of disc.
Using the A-B Repeat function (DVD-E360, E350)
Selecting the Audio Language
1. Press the REPEAT A-B button on the remote control.
You can select a desired audio language quickly and easily with the AUDIO button.
2. Press the REPEAT A-B at the point where you want repeat play to start (A).
3. Press the REPEAT A-B at the point where you want repeat play to stop (B).
3. To return to normal play, press the REPEAT A-B button until the display shows Repeat : Off
Using the AUDIO (√) button (DVD/MPEG4)
.
1. During play, Press the AUDIO
(√)
button. Change the audio language by pressing the π/†
Note
button.
-
A-B REPEAT allows you to set point (B) directly after point (A) has been set.
- Depending on a disc, the Repeat function may not work.
- The audio languages are represented by abbreviations.
2. To remove the AUDIO icon, press the RETURN button.
Note
Slow Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
- This function depends on audio languages are encoded on the disc and may not work.
- A DVD disc can contain up to 8 audio languages.
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE/(π) button.
When playing a DVD
1. During play, press the PLAY (
)
button.
Using the SUBTITLE(π) button (DVD/MPEG4)
2. Press the SEARCH (k/K) button to choose the play speed between 1/2, 1/4, 1/8 and 1/16
1. During play, Press the SUBTITLE(π) button.
2. Press the SUBTITLE(π) or π/† button to change the language. Each time you press the
SUBTITLE(π) or π/† button, the language changes.
and so on. If you want to go normal play press PLAY button.
3. Press the RETURN button to exit the Subtitle function
.
6
Note
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio
- The subtitle languages are represented by abbreviations.
- You have to change the desired subtitle in the Disc Menu, according to discs. Press the DISC MENU
button.
- This function depends on what subtitles are encoded on the disc and may not work on all DVDs.
- A DVD disc can contain up to 32 subtitle languages.
CD Audio or discs with MP3/WMA/JPEG/MPEG4 files contain individual songs and/or pictures.
The player organizes these discs into folders that contain only one content type (for example, only
pictures, only music, etc.). The folders function much like the folders you use on your computer.
To go access these folders and the files in them, follow these steps :
Videos
\
1/2
Pages
1. Open the disc tray. Place the disc on the tray.
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.
2. Close the tray. The tray closes and the Parent Folder Menu screen
appears (top screen image.) Parent folders contain all the Peer folders
that have the same kind of content: music, video, photos, etc.
3. Press the √/® buttons to select the Parent folder of your choice,
and then press the ENTER. A screen displaying the Peer folders
Using the ANGLE function (DVD)
If the disc contains multiple angles, the ANGLE appears on the screen.
CD
Pages
Move
Return
1. During play, press the TOOLS button on the remote control.
appears. The Peer folders contain all the folders with the same kind of content (video, music,
photos, etc.) that are in the Parent folder.
2. Press the π/† buttons to select
icon. When the angle screen is displayed, press the √/®
buttons on the remote control to select the desired angle option.
Folder Selection
Using the Bookmark Function
This feature lets you bookmark sections of a DVD so you can quickly find them at a later time.
Using the Bookmark Function (DVD)
The folder can be selected both in Stop or Play mode.
- To select the Parent Folder
Press the RETURN button to go to parent folder, or press the π/† buttons to select “..” and
press ENTER to go to the parent folder.
- To select the Peer Folder
Press the π/† buttons to select the desired folder, then press ENTER.
- To select the Sub-Folder
1. During play, press the MARKER button on the remote control.
2. When you reach the scene you want to mark, press the √/® or π/† buttons, and then press
MARKER button. Up to 12 scenes may be marked at a time.
Note
Press the π/† buttons to select the desired folder, then press ENTER.
-
The Bookmark function may not work, depending on a disc,
MP3/WMA/CD Audio Playback
Recalling a Marked Scene
1. Open the disc tray. Place the disc on the tray. Close the tray.
2. Press the √/® buttons to select a Music folder, and then press ENTER. Press the π/† to select a
song file, and then press ENTER. Press π/† to begin playback of the song file, and then press the
ENTER button.
1. During play, press the MARKER button on the remote control.
2. Press the √/® orπ/† buttons to select a marked scene.
3. Press the PLAY (®||) button to skip to the marked scene.
Clearing a Bookmark
Repeat/Random playback
1. During play, press the MARKER button on the remote control.
2. Press the √/® orπ/† buttons to select the bookmark number you want to delete.
3. Press the ENTER button to delete a bookmark number.
Press the REPEAT button to change the playback mode. There are four modes, such as Off, Track,
Folder and Random.
- Off ( ): Normal Playback
1
- Track ( ): Repeats the current song file.
Using the Zoom Function
- Folder ( ): Repeats the song files which have the same extension in the current folder.
- Random ( ): Song files which have the same extension will be played in random order.
To resume normal play, press the REPEAT button until Repeat : Off.
- Using the Zoom Function (DVD-E350)
1. During play or pause mode, press the ZOOM button on the remote control.
CD-R MP3/WMA file
When you record MP3 or WMA files on a CD-R for playback in this unit, please note the following:
- Using the Zoom Function (DVD-E360,E360K)
1. During play or pause mode, press the TOOLS buttons on the remote control.
-
Your MP3 or WMA files should be in ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft’s DOS and Windows, and
with Apple’s Mac. This format is the most widely used.
2. Press the π/† buttons to select
icon, then press the ENTER button.
- During DVD play, press ENTER to zoom in 1X/2X/3X/4X/ Normal in order.
-
When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, or .wma” as
the file extension.
General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use
7
8 characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
Note
-
A-B REPEAT allow you to set point (B) directly after point (A) has been set.
-
-
Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
The sound quality of MP3 files depends on the rate of compression/decompression you choose. To
get good MP3 CD audio sound requires an analog/digital sampling rate of at least 128 Kbps , but not
more than 160 Kbps. Choosing higher rates, such as 192 Kbps or more, only rarely gives better sound
quality. MP3 Files with decompression rates below 128 Kbps will not play properly.
Use a decompression transfer rate of at least 64Kbps when recording WMA files.
The sound quality of WMA files depends on the rate of compression/decompression you choose. To
get good WMA CD audio sound requires an analog/digital sampling rate of at least 64 Kbps, but not
more than 192 Kbps. WMA files with compression rates below 64 Kbps or above 192 Kbps will not
play properly. WMA files only support sampling rates > 30 Khz.
MPEG4 Function Description
Function
Description
Skip
(|k or K|)
During play, press the |k or K| button, it moves to next or previous track.
Search
(k or K)
During play, press the SEARCH (k or K) button and press again to search at a faster
speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X, 16X, 32X)
-
-
Do not try recording copyright protected MP3 files.
During play, press the PLAY (
(
) button, and then press the SEARCH (K) button
Windows MediaTM files (a registered trade mark of Microsoft Inc) and SDMITM files (a registered trade
mark of the SDMI Foundation) are encrypted and code protected to prevent illegal copying. You can-
not copy these files.
Slow Motion Play
to view video at a slower speed. (1/2, 1/4, 1/8, 1/16)
ZOOM
1X/2X/3X/4X/Normal in order.
Important:
- These functions may not work depending, on MPEG4 file.
The recommendations above cannot be taken as a guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality. You should note that certain technologies and
methods for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD player
(degraded sound quality and in some cases, inability of the player to read the files).
This unit can play a maximum of 500 files and 500 folders per disc.
This unit supports all resolutions up to maximum below.
CD-R AVI file
This unit can play the following video compres-
sion formats within the AVI file format:
- DivX 3.11 contents
DivX5
-
720 x 480 @30fps
720 x 576 @25fps
: Maximum bit rate : 4Mbps
- DivX 4 contents (Based on MPEG-4 Simple
Profile)
- DivX 5 contents (MPEG-4 simple profile plus
additional features such as bi-directional
frames. Qpel and GMC are also supported.)
MPEG4 Playback
MPEG4 Play Function
Possible warning messages that may appear
when trying to play DivX/AVI files are :
The MPEG4 audio and video data compatible with this player are contained in AVI files. This unit
can only play AVI format files with an “.avi” extension.
1. Open the disc tray. Place the disc on the tray. Close the tray.
2. Press the √/® buttons to select a Video Menu, and then press the ENTER. Press the π/† to
select an avi file (DivX), and then press the ENTER button.
Repeat and Repeat A-B playback
1. Press the REPEAT button , then press REPEAT or π/† buttons to change playback mode.
There are 3 modes, such as Off, Title and Folder.
1. No Authorization
DVD-RW & DVD+R
-
File with bad registration code.
Format that support for DivX file :
- Basic DivX format DivX3.11 / 4.12/ 5.x
- DivX Pro
2. Unsupported Codec
-
Files with certain Codec Types, Versions
(ex. MP4, AFS and other proprietary
codecs) are not suppoerted by this player.
- File format : *.avi, *.div, *.divx.
3. Unsupported Resolution
- Off : No Repeat mode.
- Title : repeats the title that is playing.
- Folder : repeats the AVI files which have the same extension in the current folder.
-
Files containing resolutions higher than the
player’s specification are not supported.
Note
-
Repeat A-B playback (DVD-E360K)
Repeat A-B
• The resolution that can be supported by DVD-E360K/E360/E350 model up to 720 x 480 @30 frames
and 720 x 576 @25 frames
• This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
1. Press the REPEAT button on the remote control. The repeat screen appears.
2. Press the π/† button to select the REPEAT A-B and then press ENTER.
3. Press the ENTER at the point where you want repeat play to start (A).
4. Press the ENTER at the point where you want repeat play to start (B).
Playing Media Files Using the USB Host feature
(ONLY DVD-E360K, E360)
Repeat A-B playback (DVD-E360, E350)
1. Press the REPEAT A-B button on the remote control.
2. Press the REPEAT A-B at the point where you want repeat play to start (A).
3. Press the REPEAT A-B at the point where you want repeat play to stop (B).
You can enjoy the media files such as pictures, movies and tunes saved in an MP3 player, USB
memory or digital camera in high audio by connecting the storage device to the USB port of the
DVD Player.
- To return to normal play, press the REPEAT A-B button until the display shows Repeat : Off
.
8
Using the USB HOST feature
specific program is connected.
• Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
• The USB host function of this product does not support all USB devices.
• The USB Host does not support USB Hard Disc Drives (HDD).
1. Connect the USB device to the USB port on the front of the unit.
2. The USB Menu screen appears. Press the √/® button to select Menu, and then press ENTER.
3. Press the π/† buttons to select a file in the USB device. Press ENTER to open the file.
Switching Between DVD and USB
CD Ripping (Only DVD-E360K, E360)
This feature lests you to copy audio files from a CD onto a USB device in MP3 format.
If you have a disk in the player, and you are viewing or listening to files on a USB device, or the USB
Menu is on the screen, you can switch from the USB device to the disc by pressing the USB button on
the remote.
Open the dics tray. Place the Audio CD (CD DA) disc on the tray, and close the tray. Connect the
USB device to the USB port on the front of the unit. Press the USB button.
1. Press the TOOLS button to display the Ripping screen.
Also, you can switch from the disc to the USB device by pressing the USB button on the remote. “USB
loading...” appears on the screen, and then the USB Menu appears.
2. Press the π/† buttons, then press the ENTER button to select files for ripping.
Note
-
To deselect files, press ENTER button again.
- Depending on the file size and clip duration, loading time for a USB device may take longer than a CD or DVD.
3. Press the √ and † button to select START, then press the ENTER button begin ripping.
The Ripping menu contain the following buttons :
Safe USB Removal
1. Press the USB button to return to disc mode or the main screen.
2. Press the STOP (■) button
-
-
Mode (Fast/Normal)
Bitrate, press ENTER to change : 128kbps ➞ 192kbps ➞ 128kbps.
• Standard : 128kbps
3. Remove the USB cable/device.
• Better Quality : 192kbps
Device selection, press ENTER to change between partitions on the USB device (max 4).
Select - Unselect, press ENTER to change from Select all (files) or Select none.
Skip Forward/Back
During playback, press the (|k/K|) button.
-
-
When there is more than one file, when you press the K| button, the next file is selected.
•
When there is more than one file, when you press the |k button, the previous file is selected.
•
Fast playback
Note
-
-
-
-
-
-
-
To cancel copying in progress, press the ENTER button.
To return to CDDA screen, press the TOOLS button again.
When the CD ripping being processed the player will automatic in play mode.
Ripping process is 2.6 times of normal speed.
Only the Audio CD(CD DA) dics can be ripping.
The USB button does not work while you’re in the Ripping menu.
CD ripping function may not supported for some MP3 players device.
To play back the disc at a faster speed, press (k/K) during playback.
Each time you press either button, the playback speed will change as follows :
•
2X ➞ 4X ➞ 8X ➞ 16X ➞ 32X.
Compatible Devices
1. USB devices that support USB Mass Storage v1.0.(USB devices that operate as a removable
disk in Windows (2000 or later) without additional driver installation.)
2. MP3 Player: Flash type MP3 player.
Picture CD Playback
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable Disc in Windows (2000 or later) without additional driver
installation.
1. Select the desired folder.
2. Press the π/† buttons to select a Picture file in the clips menu and then press the ENTER button.
Note
4. USB Flash Drive: Devices that support USB2.0 or USB1.1.
-
-
Press the STOP button to return to the clips menu.
When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.
• You may experience a difference in playback quality when you connect a USB1.1 device.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
Rotation
-
-
-
-
Press the TOOLS button to select Rotate, and then press ENTER.
Each time the √/® buttons are pressed, the picture rotates 90 degrees clockwise.
Each time the π button is pressed, the picture will reverse to the upside down to show a mirror image.
Each time the † button is pressed, the picture will reverse to the right side to show a mirror image.
Note
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected to a
PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
Zoom
-
-
Press the TOOLS button to select Zoom, and then press ENTER.
Each time ENTER button is pressed, the picture is enlarged. Zoom mode : X1-X2-X3-X4-X1.
-
Press the √/®/π/† buttons to move the enlarged picture so you can view different portions.
• Some MP3 players, when connected to this product,may not operate depending on the sector size
of their file system.
• The USB HOST function is not supported if a product that transfers media files by its manufacturer-
Slide Show
-
When you press the PLAY at JPEG file, it will go to full screen mode and automatically slide show.
9
Note
Note
- Depending on a file size, the amount of time between each picture may be different from the manual.
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
- If you hear feedback(squealing or howling) while using the karaoke feature, move the microphone
away from the speakers or turn down the microphone volume or the speaker volume.
- When playing MP3, WMA and LPCM disc, the karaoke functions will not operate.
- When the MIC is connected, Digital Out does not work.
- The MIC sound outputs only from Analog Audio Out.
- If MIC is connected to the MIC jack on the front panel, 5.1CH audio will be changed in to 2 CH audio
automatically, this condition can’t be change unless the MIC is plugged out.
CD-R JPEG Disc
-
-
Only files with the “.jpg” and “.JPG” extensions can be played.
If the disc has not been closed during the recording phase,(ie has not been finalised) it will take
longer to start playing and not all of the recorded files may be played.
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
The name of the JPEG file may not be longer than 8 characters and should contain no blank
spaces or special characters (. / = +).
-
-
MY KARAOKE
My Karaoke is the feature that makes non karaoke DVD can be used like karaoke disc, by removing
lead singer vocal sound.
-
Only a consecutively written multi-se ssion disc can be played.If there is a blank segment in the
multi-session disc, the disc can be played only up to the blank segment.
A maximum of 500 images can be stored on a single CD.
-
-
-
-
-
-
-
-
-
Using the My Karaoke feature :
Kodak Picture CDs are recommended.
1. Connect the microphone.
2. Choose My Karaoke setting in Setting --> Audio --> My Karaoke and then select one of three enable
mode :
- Original Vocal : This setting will keep the original vocal sound.
- Min. Reduction : this setting reduce the main vocals sound sligthly.
- Max. Reduction : This setting will reduce the main vocals sound greatly
3. Insert and play DVD media, this feature only for DVD non karaoke type.
When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
QSS Picture CD: The unit may not play QSS Picture CD.
If the number of files in 1 Disc is over 500, only 500 JPEG files can be played.
If the number of folders in 1 Disc is over 500, only JPEG files in 500 folders can be played.
Note
Karaoke functions (Only DVD-E360K)
Karaoke Functions
Operation Sequence
1. Feature will disabled when :
- Removing the microphone, or
- Changing “My Karaoke” settings to “Original Vocals” or
- Playing Karaoke audio, or
- Playing non supported file type (ex : *.avi: *.mp3; *.divx; etc)
2. No pop-up notification when feature disabled.
1. Connect the terminals Mixed Audio Out to TV or Amplifier.
2. Connect the microphone plug to Mic (microphone) and set Karaoke score to On. When MIC is con-
nected and Karaoke score is On, the karaoke functions can be used.
Echo/Microphone Volume/Key Control (Tone control)
Changing setup menu
Using the Setup Menu
1. Play the karaoke disc containing the songs you want.
- Press the KARAOKE (†) button, and then press π/† to select ECHO, VOL or KEY.
2. Press the √/® buttons to change the desired value.
The Setup menu lets you customize your DVD player by allowing you to select various language prefer-
ences, set up a parental level, even adjust the player to the type of television screen you have.
Karaoke Scoring (Score)
The scoring will appear as :
1. The microphone is connected and Karaoke score is On.
2. At the end of each chapter/title of karaoke disc.
- If the DVD karaoke have any information on the scoring drive.
3. Karaoke score will appear at the end of time for each chapter/title for about 6s.
1. With the unit in Stop mode, press the MENU button on the remote control. Press the √/® buttons
to select SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select a Setup Menu, then press the ® or ENTER to bring up the sub-
menu.
3. Press the π/† buttons to select a sub-menu option, then press the ® or ENTER.
4. To make the setup screen disappear after setting up, press the RETURN button.
Karaoke Sound Recording
1. Insert USB storage media into USB jack and then connected the microphone plug to Mic.
2. To star karaoke recording, choose one of DVD file, then press RECORD button.
3. When recording, user can only press STOP button and PAUSE button to cancel the recording.
4. If user do cancelation, then file result will be saved.
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
10
2. Press the π/† buttons to select DISPLAY, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Note
-The language is selected and the screen returns to Language Setup menu.
-To make the setup menu disappear, press the MENU button.
-If the selected language is not recorded on the disc, the original pre-recorded language is selected.
-Select “Original” if you want the defaultsoundtrack language to be the original language the disc
is recorded in.
-Select “Automatic” if you want the subtitle language to be the same as the language selected as
the audio language.
-Some discs may not contain the language you select as your initial language; in that case the
disc will use its original language setting.
Note
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If
Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan set-
tings in the TV’s menu system.
• If Video Output is set incorrectly, the screen may be blocked.
• When the resolution is changed during playback, it may take a few seconds for a normal
image to appear.
Setting Up the Audio Options
Setting Up the Security Options
Audio Options allows you to setup the audio device and sound status settings depending on the
audio system in use.
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select
SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select AUDIO, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Setting Up the Rating Level
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
and then press the ENTER button.
Note :
2. Press the π/† buttons to select SECURITY, and then press the ® or ENTER button.
3. The first time you access security, you must enter the default password: 0000. To enter the default
password, highlight 0 on the screen and press the ENTER button 4 times. To change the default
password.
4. Press the π/† buttons to select PARENTAL, and then press the ® or ENTER button.
5. Press the π/† buttons to select the rating level you want, and then press the ENTER button.
The higher the rating level, the more mature the allowable content.
- When play a disc that has MPEG Audio and you have Bitstream selected in the Audio Options
menu, the Digital Audio jack may not output audio
- There is no analogue audio output when you play a sound disc.
- Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
- If you select the Kid Safe level, discs rated level 2 or higher will not play unless you enter the password.
Security Levels :
❶ KID SAFE
❷ G (General Audiences) : All Ages Admitted
❸ PG (Parental Guidance suggested) : Some material may not be suitable for young children.
❹ PG 13 (PG-13 Parents strongly cautioned) : Some material may be inapproriate for children
under 13.
Setting Up the System Options
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select
SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select SYSTEM, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
❺ PGR (Parental Guidance Recommended) : These are not necessarily unsuitable for children, but
viewer discretion is advised, and parents and guardians are encouraged to supervise younger
viewers.
❻ R (Restricted) : Under 17 requires accompanying adult
❼ NC17 (NC-17) : No one 17 and under admitted.
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select
SETTINGS, then press the ENTER button.
❽ ADULT
Note:
2. Press the π/† buttons to select LANGUAGE, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired language, then press the ® or ENTER button.
- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.
11
Changing the Password
Reference
To change the password, follow these steps:
Firmware upgrade
Introduction
1. On the Settings Menu, Select Security, and then press the ENTER button.
2. Enter the current 4 digit password. If you have never changed the password, enter the default password: 0000.
To enter a number, use the √/®/π/† buttons to highlight a number, and then press the ENTER button.
3. Select Change Password, and then press the ENTER button.
Upgrading the Firmware will keep your DVD player up-to-date.
The latest firmware version for this unit is provided on the Samsung Website (www.samsung.com).
4. Enter the new 4 digit password. Use the √/®/π/† buttons to select a number, and then press the
ENTER button. Repeat 4 times.
5. Re-enter the new password in the same manner to confirm. The Security menu re-appears.
How to make an upgrade disc
You must burn the latest firmware version onto a blank CD-R or CD-RW disc:
2. Write the file to disc using the data disc setting of your disc burning software or copy the file into
USB.
Setting Up the General Options
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select
SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select GENERAL, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Notes
The CD should be burned following the specs below:
- File System CD-ROM ISO Level.
- Character set ISO 9660.
- The burned CD has to be Finalized.
- Please burn the CD at a low speed.
- Please make sure the filename is E360K.BIN
- Please make sure the root folder rename is
MEDIATEK
Setting Up the Support Options
Support option enable you to check your DVD player information such as the model code,
Software Version, The serial and version numbers can be found on the back side of your DVD-
Player.
The USB should be following the specs below:
- Please make sure the filename is E360K.BIN
- Please make sure the file is not in folder
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
Upgrade procedure
Upgrade File Detected
2. Press the π/† buttons to select SUPPORT, then press the
®
or ENTER button.
Curent Version: DSP-E360RU-0001.0
1. Open the disc tray of your DVD Player. Place the burned disc on
the tray. then close the tray. If you use USB device, connect it
to the USB port on the front of the unit. The Firmware upgrade
New Version: DSP-E360RU-0001.1
Upgrade?
3. Select PRODUCT INFORMATION, then press the
®
or ENTER button.
Press Play To start
screen will appear.
Firmware upgrade menu appears
Upgrade File Detected
Curent Version: DSP-E360RU-0001.0
New Version: DSP-E360RU-0001.1
Upgrade
2. Press the ENTER or PLAY button to start the upgrade.
-
-
-
Press any other buttons on the remote control or eject the disc
to cancel the upgrade.
File Copying
During the firmware upgrade process, the tray will open.
Please remove the disc and wait for about 2 minutes.
If the DVD player was successfully updated, the unit will turn off,
then turn on manually by pressing power button.
When the unit turns on, the Select Menu Language screen
will appear.
Upgrade File Detected
Curent Version: DSP-E360RU-0001.0
New Version: DSP-E360RU-0001.1
Upgrade?
Upgrading
Firmware upgrade starts
On-Screen Menu
English
Français
Deutsch
Español
3. Press the π/† buttons to select the desired language, and then
press the ENTER button.
Italiano
Nederlands
Macrovision Number: J892
Select
12
Notes
Reference
- If the “Select Menu Language” doesn’t appear, please contact Samsung Customer Service.
- Do not press any button or unplug the power cord during the upgrade.
- The upgrade procedure may change. Refer to the web site (www.samsung.com).
- When software is upgraded, the video and audio settings you have made will return to their default
(factory) settings. We recommend you write down your settings so that you can easily reset them after
the upgrade.
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem
Action
- Samsung provides no assurance that all freeware disc burning software will be able to burn upgrade
files that will work on the player.
• Press the ®|| button (in front panel) for more than 5 seconds under no
disc inside. All setting will revert to factory settings.
The screen is blocked.
• Press the ®|| button (in front panel) for more than 5 seconds under no
disc inside. All setings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
Forgot password.
Spesifications
Power Requirements
Power Comsumption
AC110~240V, 50/60Hz
For the power supply and power
consumption, refer to the label attached
to the product
Weight
1.10 Kg
General
Dimensions
300mm(W) X 208mm(D) X 42mm(H)
+5ºC to +35ºC
Operating Temperature Range
Operating Humidity Range
Composite Video
10 % to 75 %
1 channel : 1.0 Vp-p (75 Ω load)
R(Red) : 0.7 Vp-p (75 Ω load)
G(Green) : 0.7 Vp-p (75 Ω load)
B(Blue) : 0.7 Vp-p (75 Ω load)
Composite Video : 1.0 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Color Signal : 0.3 Vp-p (75 Ω load)
Video Output
Audio Output
Scart Jack
Output terminal
Maximum Output Level
Frequency Response
Digital Audio Out
2 CH
2Vrms
20 Hz to 20 kHz
Coaxial terminal (S/PDIF)
13
Memo
Customer Support Centre
PO Box 479
Gatehead, NE9 9BJ
United Kingdom
Telephone : 0330 SAMSUNG (7267864)
Fax : 0330 7260001
EIRE
Tel : 0818 717 100
Fax : +44 (0) 117 915 6736
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care centre.
Area
Contact Centre
0810 - SAMSUNG (7267864, € 0.07/min)
02-201-24-18
Web Site
ALBANIA
AUSTRIA
BELGIUM
42 27 5755
If batteries are not properly disposed of, these substances can cause harm to human
health or the environment.
To protect natural resources and to promote material reuse, please separate batteries
from other types of waste and recycle them through your local, free battery return
system.
BOSNIA
05 133 1999
BULGARIA
CROATIA
CZECH
07001 33 11
062 SAMSUNG (062 726 7864)
800 - SAMSUNG (800-726786)
70 70 19 70
C o r r e c t D i s p o s a l o f T h i s P r o d u c t
DENMARK
FINLAND
FRANCE
GERMANY
CYPRUS
030 - 6227 515
(Waste Electrical & Electronic Equipment)
01 48 63 00 00
01805 - SAMSUNG(726-7864 € 0,14/Min)
8009 4000 only from landline
(Applicable in the European Union and other European countries with separate
collection systems)
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
GREECE
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with
other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
HUNGARY
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
+381 0113216899
ITALIA
KOSOVO
LUXEMBURG
MACEDONIA
MONTENEGRO
NETHERLANDS
NORWAY
261 03 710
023 207 777
020 405 888
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
815-56 480
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
0 801-1SAMSUNG(172-678)
+48 22 607-93-33
POLAND
PORTUGAL
ROMANIA
808 20-SAMSUNG (808 20 7267)
08010 SAMSUNG (08010 726 7864) only from landline
(+40) 21 206 01 10 from mobile and land line
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
SERBIA
SLOVAKIA
SPAIN
0700 Samsung (0700 726 7864)
0800 - SAMSUNG(0800-726 786)
902 - 1 - SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
SWEDEN
Switzerland
0848 - SAMSUNG(7267864, CHF 0.08/min)
U.K
0330 SAMSUNG (7267864)
EIRE
0818 717100
LITHUANIA
LATVIA
ESTONIA
8-800-77777
8000-7267
800-7267
AK68-02195A-00
|