Video Distributors
VA-1102B-WQ 1-in 2-out Video Distributor
VA-1104B-WQ 1-in 4-out Video Distributor
The ENFORCER VA-1102B-WQ and VA-1104B-WQ
Video Distributors are the ideal way to distribute a
single video signal to multiple locations.
VA-1102B-WQ
Features:
Distributes 1 video input to 2 or 4 video outputs.
Compatible with both color and B/W signals.
Connect to a video camera, multiplexer, DVR and so on.
Patented interlock design connects and locks together with
other SECO-LARM CCTV baluns. (VA-1102B-WQ only)
LED power indicator.
Pass-through circuit: Power input and output can power
nearby devices.
Signals are cleaned and buffered to ensure clear, crisp
video is displayed up to 1000’ (300m).
Dimensions:
VA-1104B-WQ
Specifications:
VA-1102B-WQ
VA-1104B-WQ
Number of inputs
Number of
outputs
1
3”
(86mm)
17/8"
2
4
(46mm)
Video output
format
Video input level
Video output level
Image gain
NTSC or PAL
27/8"(73mm)
5"(125mm)
Power input
0.8~1.2Vp-p, 75ohms
1Vp-p, 75ohms
10dB
11/4"(29mm)
15/8"
Video bandwidth
Power supply
Current
10hz-10MHz
12VDC 500mA / 24VAC
(42mm)
Power output
40mA
27/8" x 17/8" x 15/8"
100mA
consumption
5" x 3" x 11/4"
Patented Interlocking Design:
Dimensions
Weight
(73 x 46 x 42 mm) (125 x 76 x 31 mm)
65g 115g
(VA-1102B-WQ only)
Copyright 2008 SECO-LARM U.S.A., Inc. All rights Reserved.
The SECO-LARM policy is one of continual development. For that reason SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
SECO-LARM®
Tel: 1-800-662-0800 (Domestic U.S. & Canada)
16842 Millikan Avenue, Irvine CA 92606 Tel: 1-949-261-2999 (California and International)
Email: [email protected]
Fax: 1-949-261-7326
pi-VA-110XB-WQ.docx
|