PCIe FireWire 1394a Card 2+1 Ports RC504
User Manual
PCIe FireWire 1394a Card 2+1 Ports RC504
User Manual
Package Contents
•
•
•
•
1 x PCIe FireWire Card 2+1 Ports
1 x User’s Manual
IEEE 1394a Cable
Ulead Video Studio CD
Hardware Installation
•
•
•
•
Turn Off the power to your computer.
Unplug the power cord and remove your computer’s cover.
Remove the slot bracket from an available PCIe slot.
To install the card, carefully align the card’s bus connector with the
selected PCIe slot on the motherboard. Push the board down
firmly.
•
•
•
Connect the system power source to the board’s power connector.
Replace the slot bracket’s holding screw to secure the card.
Replace the computer cover and reconnect the power cord.
3
Driver Installation
Please make sure the board is installed before proceeding with driver
installation.
Important: If your system doesn’t boot to Windows properly with our
card installed, check with your system’s manufacturer for the latest
system firmware update.
Windows® 2000/XP/Vista
Windows® 2000/XP/2003/Vista will automatically detect and install the
correct driver for the FireWire 3-Port PCIe Card.
To Verify Windows Installation
Right click My Computer, then click Manage, click Device Manager. The
Device Manager window opens. Scroll to the IEEE 1394 Bus host
controllers icon and click on the plus symbol, the VIA OHCI Compliant
IEEE 1394 Host Controller should be displayed.
Thank you for purchasing a quality Rosewill Product.
warranty information and future support for your product.
|