RA63s Distribution Amplifier
The ROLLS R A63s distributes a mono signal to eight outputs, or a stereo
signal to four right and left outputs. The inputs and outputs may be connected
balanced or unbalanced. Used in schools, churches, werehouses, and factories
to name a few, the RA63s delivers clean, high powered signals to separate
locations
FEATURES
UTION
• 8 channel Mono operation, or 4 channel Stereo operation
• Internal jumper configures the unit for Mono or Stereo mode
• Screw-terminal inputs and outputs
• Secure screw-driver adjustable level controls
• 20 dB Gain switch
D
AMPLFIER
• FR4 Double-sided epoxy circuit board
• Socketed ICs
• Made in the U.S.A.
SPECIFICATIONS
Input Impedance:
Max Input Level:
I/ O Connectors:
Output Impedance:
Max Output Level:
Max Gain:
100 KΩ balanced
+22 dBV
Screw terminal; +, -, and ground
50 Ω balanced
+24 dB
20 dB
S/ N Ratio:
>90 dB
Frequency Response:
THD:
10 Hz - 40 kHz, +/ - 1 dB
<.008%
Power:
Size:
120 VAC 50-60 Hz, 15VA
19” x 1.75” x 6.5”
(48 x 4.5 x 17 cm)
7 lbs. (3 kg)
Weight:
ROLLS Coporation
5968 South 350 West, Salt Lake City, UT, 84107
(801) 263-9053 FAX (801) 263-9068
|