Revolabs Microphone QSG TTM User Guide

Revolabs Quick Start Guide

Using a Solo TableTop Wireless Microphone

Remove the microphone from the Charger Base. The microphones

turn on and mute themselves automatically when removed from

Step 1

Charger Base (flashing RED LED) to prevent handling noise while

placing the microphone on the table.

The TableTop microphone should be centered on the table in front of

users, between 2 to 5 feet (.75 to 1.75m) away. It is always better to

Step 2

put the microphone as close as possible to the person speaking, but

avoid placing the microphone where it might be blocked by laptops

2 to 5 feet (.75 to 1.75m)

or paperwork.

Flashing red = muted

With the microphone in position, un-mute the microphone by

Flashing green = un-muted

pressing and releasing the MUTE button (confirm by viewing

Step 3

flashing GREEN LED).

Mute/un-mute toggle button

To turn microphones off, first mute the microphone, and then plug

it into the Charger Base. Make sure the RED LED turns on.

Step 4

Optionally, the microphone can be turned off manually. Simply press

and hold the MUTE button for ~10 seconds until the LED turns solid

RED and release button.

You are now ready to experience wireless, rechargeable and

secure (encrypted) collaborative freedom.