Radio Shack Motorized Toy Car 60 438 User Guide

XMODS® Suspension and Steering Kit  
Thank you for purchasing your Suspension and Steering Kit from Radioshack. Please read this users guide before installing, setting up, and using your  
new product.  
60-438  
Limited Warranty  
This product is warranted by RadioShack against  
manufacturing defects in material and workmanship  
under normal use for ninety (90) days from the date  
of purchase from RadioShack company-owned stores  
and authorized RadioShack franchisees and dealers.  
EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO  
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,  
INCLUDING THOSE OF MERCHANTABILITY AND  
When you need to adapt your cars handling for different driving conditions, the steering and suspension upgrade will enhance your competitive edge.  
This upgrade consists of three kinds of tie rods and damper springs. Change the tie rods to adjust and improve steering. Change the dampers and  
springs to improve handling on different driving surfaces. Before installing, turn off your vehicle and controller and detach the car body.  
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN  
DURATION TO THE DURATION OF THE WRITTEN LIMITED  
WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED  
HEREIN, RadioShack SHALL HAVE NO LIABILITY OR  
RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON  
OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR  
DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE  
OR PERFORMANCE OF THE PRODUCT OR ARISING OUT  
OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT  
NOT LIMITED TO, ANY DAMAGES RESULTING FROM  
INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY,  
REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL,  
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF  
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES.  
Changing the Tie Rod  
1. Remove two screws from the tie rod holder  
and two screws from the tie rod.  
Changing the Dampers and  
Springs  
1. Remove the two screws connecting the  
damper to the front or rear arm.  
necessary, use a screwdriver to adjust the  
servo horn to the correct position.  
2. Take out the current tie rod.  
4. Replace the tie rod holder and tighten the  
screws.  
3. Insert the new tie rod and tighten the  
screws.  
2. Assemble the desired spring color with the  
damper. Insert the damper back in the hole  
and screw the damper back into the front or  
rear arm.  
Note: Do not overtighten the screws when  
reassembling the car.  
Note: You must match the slot on the tie  
rod with the servo horn as illustrated. If  
Some states do not allow limitations on how long an  
implied warranty lasts or the exclusion or limitation of  
incidental or consequential damages, so the above  
limitations or exclusions may not apply to you.  
Tie Rod Holder  
Tie Rod  
In the event of a product defect during the warranty  
period, take the product and the RadioShack sales  
receipt as proof of purchase date to any RadioShack  
store. RadioShack will, at its option, unless otherwise  
provided by law: (a) correct the defect by product repair  
without charge for parts and labor; (b) replace the product  
with one of the same or similar design; or (c) refund the  
purchase price. All replaced parts and products, and  
products on which a refund is made, become the property  
of RadioShack. New or reconditioned parts and products  
may be used in the performance of warranty service.  
Repaired or replaced parts and products are warranted  
for the remainder of the original warranty period. You will  
be charged for repair or replacement of the product made  
after the expiration of the warranty period.  
Damper  
Servo Horn  
This warranty does not cover: (a) damage or failure  
caused by or attributable to acts of God, abuse, accident,  
misuse, improper or abnormal usage, failure to follow  
instructions, improper installation or maintenance,  
alteration, lightning or other incidence of excess voltage  
or current; (b) any repairs other than those provided by a  
RadioShack Authorized Service Facility; (c) consumables  
such as fuses or batteries; (d) cosmetic damage; (e)  
transportation, shipping or insurance costs; or (f) costs of  
product removal, installation, set-up service adjustment or  
reinstallation.  
Wheel Angle  
Use for  
Tuning Tips  
(Toe-In) Degree  
You do not always need to upgrade the tie  
To adjust for oversteering, use softer springs  
in the front and stiffer springs in the rear.  
To adjust for understeering, use stiffer  
springs in the front and softer springs in the  
rear.  
1.5  
3.0  
4.5  
Straight stretches and speed  
Some straight stretches and  
curves  
rods, dampers, and springs at the same  
time. There may be driving conditions where  
you only want to modify one at a time.  
Different combinations of tie rods and  
springs will give you optimal driving  
performance. The higher the degree, the  
tighter the turning radius of the car.  
Tight and curvy roads  
This warranty gives you specific legal rights, and you may  
also have other rights which vary from state to state.  
Spring Color  
Red  
Spring Stiffness  
Soft  
RadioShack Customer Relations  
Yellow  
Blue  
Medium  
Stiff  
When upgrading your car, it is best to work  
on a large, level workbench or table.  
300 RadioShack Circle, Fort Worth, TX 76102  
12/99  
www.radioshack.com  
08A08  
©2008 RadioShack Corporation  
All Rights Reserved.  
INS 3351-US-01  
60-438  
XMODS is a registered trademark used by RadioShack Corporation.  
Printed in China  
 

PYLE Audio Speaker PLMR44 User Guide
Radio Shack Cordless Telephone 43 5829 User Guide
Radio Shack Video Gaming Accessories 26 445 User Guide
RCA Flat Panel Television RLED3218 User Guide
Reebok Fitness Treadmill RBTL18910 User Guide
Rockford Fosgate Car Speaker RFP 1408 1808 User Guide
Rolls MP3 Player HM58 User Guide
Ryobi Lawn Mower 136 User Guide
Saitek Mouse M40T User Guide
SEM Utility Trailer HD55 User Guide