What’s Included
4GB MP3 Player
MP3 Player
Mini USB 2.0 cable
User’s guide
42-420/GX400
Earphones
Rhapsody™ Software Installation CD
with FM Radio and Speaker
System Requirements
•
Windows® 2000, Windows XP (SP2) or Windows
Vista®
Thank you for purchasing your Gigaware 4GB MP3 Player with FM
Radio and Speaker from RadioShack. Please read this user’s guide
before installing, setting up, or using your new product.
•
•
•
•
•
Pentium II 200MHz
64MB RAM
500MB memory space
CD-Rom drive
USB 1.1 or USB 2.0
Features
•
•
•
•
•
•
4GB flash memory
Display
Integrated Speaker
Key lock
Built-in speaker and rechargable battery
FM radio
Getting Started
Shows information
during playback or
menu navigation.
Disconnect earphones to listen
via the speaker.
Slide down to lock the keys to
prevent accidental button
pressing when on the go.
appears. Slide up to unlock.
2 color display
STEP 1
Charge your MP3 Player
Five preset equalizer settings
Supports MP3, WMA, ID3 tag, DRM9 and
DRM10
In FM radio mode, activate
the speaker mode with your
earphones connected.
Before using your player for the first time, charge it for about 3
hours. Flip open the USB jack cover and connect the supplied USB
cable to the player and your PC.
•
Can be used as a USB flash drive to transfer and
store any type of files.
The player shows the Gigaware splash screen,
followed by the connected to PC display with
battery charging icon.
Specifications
Built-in flash memory supported.................up to 4GB
Supported file formats......... MP3 (64kbps~320kbps)
.......................................WMA (64kbps~192kbps)
FM radio frequency........................87.5~108.0MHz
Signal to noise ratio....................................> 85 dB
Power....................... Built-in Lithium polymer battery
Playback time ..................................up to 10 hours
Operating temperature............32 to 104ºF (0 to 40ºC)
Language support ......................English and Spanish
Dimensions (H×W×D)..................... 1.4 × 2.1 × .4 in
............................................... (36 × 53 × 11mm)
Weight .......................................... .78 oz. (22.2g)
+/–
The battery full icon appears when fully charged.
Increase/
decrease the
volume.
Note: Use only the supplied USB cable to charge your player.
If the player is connected to the PC via a hub, the hub must
be self-powered to charge the player.
Clip
STEP 2
Connect to your PC & Download Music
Specifications are subject to change and improvement
without notice. Actual product may vary from the images
found herein.
Clip your player to
your pocket, belt,
etc. for handsfree
music on the go.
We’ve provided some sample tracks if you want to turn on the
music immediately (go to STEP 3). To listen to your own songs:
1. Connect to your PC as above for charging your MP3 player. The
player is automatically detected and the directory removable
disk appears on your computer.
Using Rhapsody Software (optional)
The supplied CD contains Rhapsody software, an
optional music file management program and online
service for your player.
2. Drag and drop the desired files from your computer to the
player, OR use music management software, such as Windows
Media® Player 11 or Rhapsody (included; see Using Rhapsody
Software).
§
Reset
Press to turn on; hold down to turn off.
Press during playback to pause a track or mute sound in radio mode.
Press if the
keys do not
respond. See
Troubleshooting.
For more information on Rhapsody,
Important Copyright Notice
Distribution of MP3 files without permission from the content
owner is against copyright laws. RadioShack will not be liable
against such actions.
ꢀ/ꢁ
To install the software:
During playback: Skip to another track; hold down to search within a
track.
1. Load the CD into your PC’s CD-ROM drive. The
installation starts automatically. If it does not, select
Start Ö Run, and type the path for your CD drive).
Earphone jack
Press ꢀ to return to the beginning of the current track (wait 5
seconds after current track begins).
CAUTION! ONLY EJECT THE PLAYER WHEN THE PC ICON HAS
STOPPED FLASHING AND ALL DOWNLOADS HAVE
COMPLETED to prevent corrupting files and accidentally
reformatting your player.
2. Double-click the setup application, follow the on-
screen instructions.
Connect supplied
3.5mm earphones.
For menu navigation: Toggle or confirm options; return to previous
menu or screen.
3. When setup completes, click Finish.
In radio mode: Tune frequencies. Hold down to start auto scan or
select a preset station when appears.
USB port
MENU
STEP 3
1. Press
Play Music
Hold down to return to the menu during music or radio playback
display. Press once or more to scroll through main function menus:
Music/Now playing/Setting/Radio.
Open cover to
reveal USB port.
§
to turn on your MP3 player. The Gigaware splash screen appears, followed by Updating
(updates may take time). When updates are complete, Music displays.
2. Use the navigation buttons to start playing music, or see next page for more detailed instructions.
§
3. To turn off, press and hold
until the Power Off icon disappears.
Scroll through function menus: Music/Radio/Setting/Now playing.
Press during playback to enter Music Options or Radio Options.
©2008. RadioShack Corporation. All rights reserved. Gigaware is a trademark and RadioShack is a registered trademark used by RadioShack Corporation.
Windows and Windows Media are registered trademarks, and Windows Vista is a trademark of Microsoft Corporation in the United States and/or other countries.
Rhapsody and Rhapsody logo are trademarks or registered trademarks of RealNetworks Inc. All Rights Reserved.
Playlist: Press and hold to add a song to Playlist during track
playback, or enter Playlist view from main Music display.
|