23-1470RC.fm Page 1 Wednesday, November 1, 2000 1:35 PM
Smart Travel Charger
OWNER’S MANUAL — Please read before using this equipment.
Your RadioShack Smart Travel Charger gives you some of the finest
features in cellular phone battery chargers. Its short circuit and over-
load protection ensure reliable performance, and its slim shape and
lightweight body make it easy to carry wherever you go.
nect the DC cord’s cigarette-lighter plug to the vehicle’s cigarette-
lighter socket. The green power indicator lights.
Note: The adapter automatically adjusts for 12V or 24V systems.
Its features also include:
Connecting a Motorola Rechargeable Battery
100–240 VAC Wide AC Input Range — lets you charge a battery
from any AC power source worldwide. Great for traveling!
If your cellular phone is a Motorola StarTAC model, connect the sup-
plied flat-plug cable labeled FOR MOTOROLA STARTAC to the cellular
phone’s battery charging socket, then connect the cable’s RJ11 plug
to the charger’s TO PHONE socket.
12–24 VDC Wide DC Input Range — lets you charge the battery in ei-
ther a car or large truck with a 24V DC system. Switches from 12V DC
to 24V DC automatically.
Connecting a Nokia Rechargeable Battery
Over-charge Protection — when the battery is fully charged, the
If your cellular phone is a Nokia model, connect the supplied barrel-
plug cable labeled FOR NOKIA 5110/6110 to the cellular phone’s battery
charging socket, then connect the cable’s RJ11 plug to the charger’s
TO PHONE socket.
charger automatically switches to trickle charging to avoid overcharg-
ing.
Convertible Charging Outlet and Cables — let you easily charge
your cellular phone at home or on the road.
CHARGING THE BATTERY
Power Indicator — lights when the power source is connected.
When the connection is completed, the charger starts charging the
battery. Consult your cellular phone’s owner’s manual for directions re-
garding your specific phone and how to tell when it is charged.
CELLULAR PHONE BATTERIES
The charger is designed for use with the following cellular phone bat-
teries.
REPLACING THE DC POWER CORD’S FUSE
Your charger’s DC power cord’s cigarette lighter plug uses a 1.5A
250V fast-blow fuse to protect the charger from being damaged due to
overload. The fuse blows when the load current exceeds 1.5 Amp.
Should this happen, replace the fuse with the same type fuse (avail-
able at your local RadioShack store).
Motorola
Nokia
5100 Series
StarTAC series
V3620
6100 Series
7100 Series
8022 Series
8800 Series
L7089
P8090
Important: If you are using a DC power cord other than the supplied
one, be sure the cigarette-lighter plug has a protective fuse with the
same specifications and polarity.
See “Specifications” on Page 2 for a list of other phones’ charging ca-
bles that can be used with this charger.
CONNECTIONS
Connecting AC Power (100–240 VAC)
To charge the battery using AC power, connect the supplied AC cord’s
small plug to the charger’s AC INPUT socket, then connect the AC
cord’s larger end to a standard AC outlet. The green power indicator
lights.
Note: The supplied AC cord’s two-bladed plug is suitable in the USA
and Canada. For use in other countries, your local RadioShack store
offers a variety of adapters.
Connecting Vehicle Power (12–24 VDC)
To charge the battery using a vehicle’s DC power, connect the sup-
plied DC cord’s barrel plug to the charger’s DC INPUT socket, then con-
© 2000 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
|