Radica Games Games 74008 User Guide

E
SLEEP MODE - After 60 seconds of inactivity, the game will auto-  
matically go into "sleep mode". To turn it on again, simply press the  
ON/START button.  
Setting Up the Game  
First, press the ON/START button to turn on the game. If you wish  
to choose a higher difficulty level, press the LEVEL button. If you  
wish to play with multiple players, press the PLAYERS button. After  
making your selections, press the ON/START button to begin the  
game. If you don't press any of the setup buttons, the game will  
simply begin in Single Player Mode on level 1.  
Multiple Players  
The first player will have a chance to complete the entire game. If  
player one finishes all four challenges, that player's time will be the  
time to beat for the rest of the players. If player one does not com-  
plete the game, that player will be ELIMINATED and it's the next  
player's turn.  
Let's Begin!  
Model 74008  
1 to 4 players / Ages 8 and up  
Before you begin each game of you must wait for the computer  
to say “time is ticking”. Complete the series of four games to  
win! BE CAREFUL! If the CORE is knocked the game will end  
immediately.  
INSTRUCTION MANUAL  
P/N 82378400 Rev.A  
Can you handle the pressure or will you have a Total Meltdown?  
1. LIVE WIRE  
Your mission is to complete FOUR INTENSE CHALLENGES before  
the computer suffers a Total Meltdown! Are you up to the chal-  
lenge? Can you survive the intensity? Just keep a cool head, a  
steady hand, and try not to have a Total Meltdown!  
The clock is ticking as your first  
challenge begins! You must figure  
out the first code by quickly plug-  
ging the live wires into the correct  
ports. After inserting all the wires,  
press the ENTER button. The  
wires will then light up to let you  
know if they are in the correct port  
or not.  
Buttons and Features  
ON/START - This button turns on the game from sleep mode and  
starts a new game. Press and hold this button to turn the game off.  
If a wire lights up RED, it's  
PLAYERS - This button toggles through the possible number of  
players (1-4 players). Press this button until you hear the desired  
number.  
plugged into the wrong port. If the wire lights up GREEN, then you  
have it! It's in the right port! Keep switching out the live wires until  
you crack the code!  
LEVEL - Press this button to toggle through the three skill levels.  
The higher the skill level, the shorter amount of time will be allotted  
for the game. As the level increases the game becomes more diffi-  
cult.  
2. CIRCUIT BREAKER  
For your next challenge, you must  
insert all 12 computer chips into  
the computer as quickly as possi-  
ble in order to complete the cir-  
cuit. First, you must remove all  
12 chips from the storage com-  
partment located at the bottom of  
game 2. However, you may want  
to do this BEFORE starting the  
game in order to save time.  
BEST TIME - Press this button to see the shortest time in which the  
game has been completed.  
SOUND - This button toggles the sound between high and low.  
RESET - When a blunt point is inserted, this button resets the game  
to its original settings. Just remember, when you reset the game,  
the Best Time is cleared.  
Next, you must insert each com-  
puter chip into the correct slot.  
Each chip is a different shape, so  
it's not as easy as it looks. Spin  
the DIAL to view all of the multi-  
shaped computer slots. Match  
the chips with the correct slots  
and insert them all to complete  
the circuit! You must insert all 12  
pieces to move to the next game.  
LIVE WIRES - When placed into the correct ports, the special code  
will be imputed for the first challenge.  
ENTER BUTTON - Press this to see if the live wires are in the cor-  
rect ports.  
COMPUTER CHIPS (12) - These multi-shaped chips (total 12  
pieces) must be inserted into the matching computer slots.  
DIAL - Slowly spin this to gain access to ALL of the multi-shaped  
computer slots.  
3. ACCESS CODE  
STORAGE COMPARTMENT -  
Before beginning the Circuit  
Breaker challenge, be sure to  
open this and remove all 12 of  
the special computer chips,  
You're almost there! Now you  
must successfully decipher and  
enter the code to access the core!  
First, the keypad will flash the  
access code across its individual  
buttons (the buttons light up in a  
certain sequence). All you have  
to do is press the flashing buttons  
and enter the correct code.  
To open compart-  
ment door lift the  
door found on  
side 2.0.  
then close the compartment  
door.  
KEYPAD - Press these buttons  
as you decipher the code to access the core.  
Simple, right? WRONG!  
COMPUTER CORE - Grasp the top and carefully lift it out of the  
unit to avoid a Total Meltdown. While playing the game be careful! If  
the core is disturbed it will end your game immediately. To quit a  
game, pull out the core.  
The computer is very tricky. Wait  
till three buttons light up. Follow the flashing buttons. When the  
lights go off, repeat the pattern. Then press the buttons to access  
the code. Just don't make a mistake. If you do, you'll have to start  
 

RedMax Trimmer CHT2250 User Guide
RedMax Trimmer SRTZ2460F User Guide
Reebok Fitness Home Gym RBCCEL59060 User Guide
Runco Projector VX 33D User Guide
Ryobi Trimmer PLT3043S User Guide
Samsung Cell Phone 20040414141622906 User Guide
Samsung Digital Camera Digimax U CA User Guide
Samsung DVD Player DVD HD845 User Guide
Samsung DVD Player DVD V9800 User Guide
Samsung Security Camera SOD14DC User Guide