RCA TV Mount MAF10BK User Guide

Safety precautions  
Attaching wall mount plate  
Drywall Installation  
Follow these precautions to ensure safe installation and  
mounting of your flat panel TV.  
1. Use a stud finder to locate a wood stud where you want  
to install the mount.  
NOTE: It is required that the wall mount plate be  
1. Be sure you have purchased the correct wall mount  
attached to wall studs.  
for your TV. Recheck the size and weight constraints.  
LCD TV Wall Mount  
2. Locate center of stud.  
2. Gather all necessary tools before you begin installation.  
You will need a #3 bit Phillips screwdriver, electric  
drill, drill bit (included), level (integrated level on  
product), stud finder, and hammer (for brick and  
concrete installations).  
Installation Manual  
3. Place the wall mount plate against the wall, with the  
cord management channel towards the bottom. Level it  
using the bubble guide. Mark the locations on the wall  
where the mount is to be installed.  
4. Drill holes at each marked location using the enclosed  
Fits TVs 13"- 27"  
3. It is essential for the wall mount plate to be attached  
wood drill bit.  
to wall studs. (Use a stud finder.)  
Maximum Load Capacity – 55 lbs. (25 kg)  
5. Secure the wall mount plate to the wall, using one  
4. Use the included hardware for mounting purposes.  
This hardware has been provided to ensure a safe and  
secure mount.  
drywall screw, but do not completely tighten it yet.  
6. Using the integrated bubble level, carefully adjust the  
wall mount plate until it is level.  
5. Hire a licensed electrician to relocate an electrical  
7. Insert the remaining screws and tighten all three  
outlet, if needed.  
screws completely.  
6. Be sure to purchase wires long enough to connect  
the TV to the audio and video components in your  
installation.  
MAF10BK  
Concrete/Brick Installation  
7. We recommend you hire a professional installer,  
if you have any concerns about installing the TV  
wall mount yourself.  
Thank you for choosing the RCA MAF10BK Universal  
Flat Panel TV Wall Mount. This mount can be used for  
all major brands of 13" - 27" flat panel TVs, 55 lbs (25 kg)  
or under. Before attempting to mount your television set,  
please remove all parts from this package and read the  
installation instructions carefully.  
1. Place the wall mount plate against the wall with the  
cord management channel towards the bottom.  
2. Using the integrated bubble level, mark off the position  
of the holes that will be used for securing the mount.  
3. Place the wall mount plate aside.  
4. Using an electric drill and a 5/16" (8mm) masonry bit,  
Keep your sales receipt to obtain warranty parts and  
service and for proof of purchase. Attach it here and record  
the model number. This number is located on the product.  
drill holes in the marked locations.  
WARNING: Use of this mount with a TV weighing  
over 55 lbs. or with a screen larger than 27" could cause  
the mount to fail causing property damage and/or  
personal injury.  
5. Remove any excess dust from the holes.  
6. Insert a concrete anchor into each hole. If necessary,  
use a hammer to lightly tap each anchor into place so  
they are flush with the wall.  
Model No. __________________________________________  
Purchase Date: ______________________________________  
Dealer/Address/Phone ______________________________  
7. Once both anchors are in place, place the wall mount  
plate back into position.  
8. Attach the wall mount plate, using the drywall screws  
Limited Lifetime Warranty  
Audiovox Electronics Corporation (the “Company”) warrants to you the  
original retail purchaser of this product that should it, under normal use  
and conditions, be proven defective in material or workmanship during  
its lifetime while you own it, such defect(s) will be repaired or replaced (at  
the Company’s option) without charge for parts and repair labor.  
provided.  
9. Make sure all screws are tightened and secure.  
Attaching the TV mount plate  
To obtain repair or replacement within the terms of this Warranty, the  
product is to be delivered with proof of warranty coverage (e.g. dated bill  
of sale), specification of defect(s), transportation prepaid, to the Company  
at the address shown below. Do not return this product to the Retailer.  
1. Unplug your flat panel TV before starting this step of  
the installation.  
This Warranty does not cover product purchased, serviced or used  
outside the United States or Canada.  
IMPORTANT: NEVER lay the TV face down as this  
may cause damage to the viewing surface.  
This Warranty is not transferable and does not extend to costs incurred for  
installation, removal or reinstallation of the product. This Warranty does  
not apply if in the Company’s opinion, the product has been damaged  
through alteration, improper installation, mishandling, misuse, neglect,  
or accident.  
Product diagram  
2. Before attaching the TV mount plate to the TV,  
determine which hardware to use. Examine the back of  
your TV. If the back is flat, use the M4x12mm bolts. If  
your TV has a recessed back, use the longer M4x30mm  
bolts and 1/2" spacers.  
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS  
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT  
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S  
LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER  
FOR THE PRODUCT.  
Retainer Clip  
3. After you have determined which bolts to use, attach  
the TV mount plate to the back of your TV.  
This Warranty is in lieu of all other express warranties or liabilities. ANY  
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY  
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE  
SHALLBELIMITEDTODURATIONOFTHISWARRANTY.INNOCASE  
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR  
INCIDENTALDAMAGESWHATSOEVER.Nopersonorrepresentativeis  
authorized to assume for the Company any liability other than expressed  
herein in connection with the sale of this product.  
NOTE: Be careful not to over-tighten the bolts.  
Attaching the TV mount plate  
to the wall mount plate  
TV Mount Plate  
Some states/provinces do not allow limitations on how long an implied  
warranty lasts or the exclusion or limitation of incidental or consequential  
damage so the above limitations or exclusions may not apply to you. This  
Warranty gives you specific legal rights and you may also have other  
rights which vary from state/province to state/province.  
Integrated  
Bubble Level  
1. To complete the installation, slide the TV mount plate  
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,  
Hauppauge, New York 11788  
with your TV attached into the wall mount plate.  
2. The retainer clip on the top of the wall mount plate  
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,  
Unit 3, Door 16, Mississauga, Ontario L5T 3A5  
should click, indicating that the mount is secure.  
3. To remove the TV, push in on the clip and slide the TV  
Trademark(s) Registered, Marques Deposee, Marcas Registradas.  
All other brands and product names are trademarks or registered  
trademarks of their respective owners.  
mount plate up.  
Wall Mount Plate  
© 2008 Audiovox Accessories Corporation  
111 Congressional Blvd., Suite 350  
Carmel, IN 46032  
Cord Management Channel  
Specifications  
MAF10BK_NA_IB_01  
Model:  
MAF10BK  
Two-piece, low-profile design  
Preparing to install  
Description:  
RCA Universal Flat Panel TV  
Wall Mount  
Before beginning the installation process, verify that you  
have all the necessary tools on hand. The following tools  
are required for proper installation:  
TV Size Range:  
13" – 27"  
Maximum Load:  
Minimum Profile:  
VESA Compliant:  
Integrated Bubble Level  
Cord Management  
55 lbs. (25kg)  
1.1" (2.8 cm)  
75/100  
Tools  
#3 bit Phillips screwdriver  
Stud finder  
Electric drill  
Drill bit (included)  
5/16" (8mm) masonry drill bit for concrete/  
brick installation  
Level (integrated level on product)  
Allen Wrench (included)  
Hammer (for concrete installations)  
Package Contents  
Make sure all the hardware has been included with  
your mount.  
(1) Drill Bit  
(3) 1-7/8" Drywall Screws  
(3) Concrete Anchors  
(1) Allen Wrench  
(4) M4x12mm Bolts  
(4) M4x30mm Bolts  
(4) 1/2" Spacers  
(1) Phillips-Head Driver  
 

Q Logic Switch 59021 05 User Guide
Radio Shack Cordless Telephone TAD 728 User Guide
Reebok Fitness Treadmill RBTL699080 User Guide
Regency Indoor Fireplace 944 072 User Guide
Runco Projector VX 1000CI User Guide
Samsung Cell Phone GA68 60747A User Guide
Samsung Computer Monitor 1501MP User Guide
Samsung CRT Television CRT Direct View TV User Guide
Samsung DVR SHR 6040 User Guide
Samsung Printer CLP 415NW User Guide